Smart Glasses EI-10 Instruction Manual Thank you for purchasing this Olympus product. To ensure your safety, please read this instruction manual before use, and keep it handy for future reference.
Table of Contents Table of Contents................................................. 02 Connection to Computer.................................... 31 Warnings and Precautions.................................. 03 Connecting to computer via Micro-USB cable 31 Internal storage folders 32 Warnings Precautions Precautions for using wireless functions (Bluetooth, Wireless LAN) 04 07 09 Before Use............................................................
Warnings and Precautions • The Olympus EyeTrek is designed as a hands-free business solution through a head mounted display that can facilitate communications between parties, display real time information, record or playback audio and video content, and use various applications that can improve work efficiencies in a commercial or industrial environment. Use this product only for the intended purpose.
▎ W a rn i n gs PRODUCT USERS • Do not use if you are under 16 years of age. • Do not use if you are in poor physical condition. • Do not use if you have heart disease, high blood pressure, or other heart problems. • Do not use if you are tired or have difficulty sleeping. • Do not use under the influence of drugs or alcohol. • Do not use if you have a history of photosensitivity. • Do not use if you have a visual field disorder, alignment disorder, or eye movement disorder.
• Do not look at the sun or other strong lights while using this product. • Do not use this product continuously for more than one hour without taking a 10-minute break. • Do not use this device at an excessive volume. Otherwise, hearing loss can occur and you may not be able to hear important sounds around you, such as alarms, horns, and sirens. USE ENVIRONMENT WARNINGS • Do not use product anywhere where the use of such devices are prohibited.
BATTERY USE AND CARE • The product contains a lithium battery. To prevent battery leaks or damage, carefully follow all instructions regarding the use and charging of batteries. Lithium batteries contain potentially toxic materials. Never attempt to disassemble or modify a battery in any way. • Use only the battery, battery charger, and AC adapter provided with the product.
▎ P R EC A U T I O NS EYEWEAR • Always wear the product with safety glasses, prescription glasses, or other eye protection to prevent the eye from coming into contact with the product’s viewer. Otherwise, a sudden impact may cause the product to strike and injure the eye. Use the enclosed attachments to secure the visual display to your glasses or eye protection before use.
CONNECTIONS, APPLICATIONS AND DATA UPLOADS • Do not connect, upload or install any connection site, applications or data onto this product where the safety and security of such connection, application or data has not been provided, approved or authorized by Olympus. • Please use this product only after ensuring that your system maintains safety and total system reliability.
Precautions for using wireless functions (Bluetooth, Wireless LAN) FCC Notice • This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. • These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• There is no proof, however, that these low power wireless devices are absolutely safe. • Low power Wireless devices emit low levels of radio frequency (RF) energy in the microwave range while being used. • Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. • Many studies of low-level RF exposures have not found any biological effects.
Before Use Unp ack ing the b ox co nte nt s Smart Glasses Protection case E I -10 Battery Headband & Clips E I - H B1 W H B - 0 01 x 2 S ma l l x 2 Midium x2 L a rg e x 2 Battery Charger Ferrite Core E I - C S1 ( EI- C H1) ( U N 3 1 2 -0 5 2 0 ) Instruction manual Warranty card 11
Names and func t i o ns o f co m p o nent s Microphone Touch sensor allows for touch operation. Flexible arm adjusts display position. Display shows the screen. Prism Camera takes pictures and videos. Power button Button❶ shows the home screen. Button❷ Button❸ operate differently depending on the application. turns on the power, turns on/off sleep mode and other modes. 4-pole mini jack for connecting devices such as headsets or earphones. USB Micro-USB port for connection via Micro-USB cable.
Ch arging the b at te r i e s Fully charge the battery prior to first use, and recharge the battery when it is drained. Charging the battery for the first time will take approximately 2.5 hours. Charge indicator LED Be careful with the battery direction.
I ns er ting and re p lac ing b at te r i e s Insert 1. Move down the lock and open the cover. Lock Cover 2. Move the battery stopper and insert the battery. Batter y Battery stopper Be careful with the battery direction. Replace (Hot swap) The battery can be replaced without turning off the power. 1. Hold down the power button for approximately 2 seconds. 2. The power LED starts blinking. After a few seconds, it switches to the slow blinking state with intervals of approximately 2 seconds.
How to Wear the Device Always wear the device with safety glasses, prescription glasses, or other eye protection. Warning Otherwise, an injury may cause such as by hurting the eye by the display. Use the provided headband. Holder Clip Connector Ear hook 1. Slide the device connector to insert it into the headband holder. 2. While wearing the glasses, attach the clip to the temple of the glasses. Regarding clip size (Small, Medium, Large) Clips can be replaced to fit the width of the temples.
Basic Operations The user can operate this device intuitively by using the touch sensor. When a user is wearing gloves, the touch sensor does not respond. Ex a mpl es o f m aj o r o p e rat io ns • Swipe from back to front • Swipe from front to back • Display the applications sequentially (counterclockwise order) on the Home screen. • Display the next image. • Play back the next video. • Zoom in the displayed image/video in Camera and Video Recorder.
Turning On/Off the Power Tu rn ing o n the p owe r Press the power button. The power LED turns on, and the startup screen appears on the display. Power LED USB Press *Note that holding down the button does not turn on the power. *After flashing of the power LED, it takes about 20 seconds until the screen appears. Tu rning o ff the p owe r To turn off the power, remove the battery. 1. Hold down the power button for approximately 2 seconds. The power LED starts blinking.
Tu rn ing o n/o ff t he d i s p lay The display can be switched between on/off. Even when the display is off, the application is continuously running. Therefore, consumption of the battery power continues. To save the power, shift to the sleep mode. Press the power button. The display turns off. USB Press Pressing the power button again recovers the display.
• About the display Due to the characteristics of the material used in the OLED panel, permanent burn-in or reduction in brightness may occur. For the OLED display used in this product, continuously displaying static images in the same position on the screen or repeatedly displaying the same image may cause irreversible burn-in. Performing the operations detailed in 1 to 3 below reduces the risk of burn-in. 1. Do not display the same image for a long time.
Home Screen On this screen, applications can be selected and started both by touching and by operating buttons.
O p e ratio n pro ce d u re Selecting application Swipe on the touch sensor, or press the button ❷, ❸. OR USB Press Applications are displayed in the following order. QR Code Settings Starting up the application 1. Display the application to be started using the procedure above. 2. Double tap on the touch sensor, or hold down the button ❷, ❸ for approximately 2 seconds.
Initial Applications I ma ge Viewer This application displays the image files stored in the internal storage of the device. In order to save image files to the internal storage, see "Connection to Computer"(P31).
Ca mera This application captures still images. The captured still images will be stored in the internal storage of the device.
Vid eo R eco rder This application records movies. The captured movies will be stored in the internal storage of the device. Folder used :OLYMPUS/Video Record file format :mp4 Record size :1280px × 720px Encoder :H.264 Frame rate :20FPS Maximum recording time at one time : Up to 29 minutes 59 seconds.
Fu n c tio n Chec ke r This application checks the operation of this device, determining whether the basic functions work properly or not. To check the voice function, connect the earphone or headset to the 4-pole mini jack.
[1:WLAN] Checks if a Wireless LAN connection can be established properly. When Wireless LAN is ON: The check is conducted automatically. If no problem is found, the screen displays [Wireless LAN [OK]], and the check result at the top of the screen changes to . If the check is not conducted automatically, hold down the button ❸. When Wireless LAN is OFF: The Wireless LAN function is automatically turned ON. Then hold down the button ❸.
[4:ACCELEROMETER] Checks if acceleration is measured properly. If the sensor value changes, the check result at the top of the screen changes to . If the value does not change, restart the device and check again. [5:GYROSCOPE] Checks if angle and angular velocity are measured properly. If the sensor value changes, the check result at the top of the screen changes to . If the value does not change, restart the device and check again. [6:MAGNETICFIELD] Checks if magnetic field is measured properly.
[9:SOUND] Checks the recorded voice. Connect the earphone or headset to the 4-pole mini jack. The voice recorded in [8:MICROPHONE] is played back repeatedly. If the voice is played back properly, the check result at the top of the screen changes to . To check the sound quality such as clarity or noise involvement, users should check the actual sound by listening to the voice. [10:SCREEN BRIGHTNESS] Checks if the screen brightness can be adjusted properly. Swipe the touch sensor.
QR Co de S ettings This application reads QR codes. Reading the QR codes created by the dedicated "QR Code Generator" (P33) allows for setting Wireless LAN connection and other various operations. QR Code Settings █ █ Operation procedure Starting the application automatically starts up the camera. Adjust the camera position so that the QR code fits in the screen. The reading of the QR code then starts automatically.
S ettings This application allows users to check and change the network setting, device setting, personal setting, account setting, and system setting. NOTE • When text input is required during the settings, connect the USB converter (OTG) and connect the mouse via USB. Clicking on the text field with the mouse displays a software keyboard. It is possible with a Bluetooth mouse, too.
Connection to Computer Connecting this device with a computer via a Micro-USB cable allows for transferring the data in the device's internal storage to the computer. Data backup or deletion can be performed in this mode. Furthermore, by saving movie/image files in the specified initial application folders, the movie/image can be shown on the device. Connec ting to co m p u te r vi a M i c ro -U S B c a bl e The following are the operation systems of the computers that can be connected.
NOTE • If the device driver contained in the EyeTrek development environment kit (P.39) is not installed on the computer, it is impossible to install the driver properly. Even so, the device can be used continuously since users can access the internal storage via Media Transfer Protocol (MTP). 1. Confirm that no data is being transferred, and then remove the Micro-USB cable. I nternal sto rage fo ld e r s The following are the folders used in the initial applications.
QR Code Operations Reading QR codes via this device allows for Wireless LAN connection, application startup, and other various operations. QR Co de G ene rato r This application generates QR codes. Install the application to the Android™ device (smartphone or tablet). QR Code Generator can be downloaded from the website. Read the QR code below with an Android device and access to the download site. ht t p : / / w w w. g e to l y m p u s.
Wire l ess L AN se t t ings Reading the QR code generated by [QR Code Generator] allows for completing Wireless LAN settings. 1. Run [QR Code Generator] on the Android device. 2. Select [1. Wireless LAN Settings]. 3. Enter the [SSID] and [Password]. 4. Tap [Generate QR Code]. (The QR code is generated.) 5. Read the QR code using the [QR Code Settings] on the device. When the device completes Wireless LAN settings properly, the Wireless LAN icon is displayed at the top right of the screen.
O th er o perations Reading the QR code generated by [QR Code Generator] allows for browsing websites, image and movie files on the device, as well as starting up the application. 1. Run [QR Code Generator] on the Android device. 2. Select the item from the menu. 3. Enter the URL of the website or the path to the image file or movie file to be browsed in the internal storage. 4. Tap [Generate QR Code] to genrate the QR code. 5. Read the QR code with the [QR Code Settings] on the device.
Troubleshooting If this product does not work as intended and you are unsure of what to do, refer to the information below to fix the problem(s). Symptom 36 Action Reference page The device cannot be turned ON. Check if the screen is displayed by pressing the power button. Holding down the button does not turn on the power. If the screen is not displayed, replace the battery with one fully charged, and press the power button. P.14 P.17 The screen is not displayed when the power is ON.
Frequently Asked Questions Question Answer Tell me how to connect to the internet. Reading QR codes allows for connecting a Wireless LAN. For details, see "QR Code Operations"(P33). How do I enter characters? Connect a USB converter(OTG) to the device, and connect the mouse via USB. By clicking on the input area on the display (e.g. browser address bar), users can enter characters using the mouse on the software keyboard. It is possible with a Bluetooth mouse, too.
Question Answer Reference page • Perform updating with “Olympus EyeTrek I'd like to update the firmware. I'd like to check the firmware version. I'd like to install an independently developed application. 38 Utility”. Download the complete development environment followed by installing “Olympus EyeTrek Utility” on your PC. For details, refer to the explanation in the development environment. It can be checked in [Status Information] of the [Function Checker]. P.39 P.
Development Environment The entire set of the development environment for this device is provided on our web site. When setting the device or customizing the applications, confirm the user policy first. Then download the necessary sources from the following web site. Note that we do not support or guarantee the safety of files or applications developed using this environment. Also note that the environment specifications may be changed or deleted without notice. Development Environment http://www.
Specifications Device Model No. EI-10 Display panel OLED Display resolution nHD+ ( 640×400 ) Field of view Diagonal 13 deg. (approx.) CPU TI OMAP 4470 OS Android 4.2.2 RAM (main memory) 1GB ROM (user memory) 8GB Sensor 3-axis accelerometer, 3-axis gyro, 3-axis magnetic field Camera 1992 x 1216 pixels (effective pixels) Physical buttons 4 buttons (including power button), touch sensor Audio input / output 16bit monaural microphone, 4-pole mini jack Bluetooth 4.
██ Optional Accessaries (sold separately) Power Pack Adaptor Protective Eyewear with Mount Headset with Mic EI-PC1 EI-OG1 EI-HS1 Battery 5 Pack USB-AC adapter EI-BT5 F-5AC Power Pack Adap to r Remove the lid of the cover while paying attention not to pinch the Power Pack Adaptor cable. Insert the Power Pack Adaptor and connect the USB terminal to the USB-AC adapter, etc. Power Pack Adaptor Lid USB terminal USB-AC adapter * More than 5V /1.
Protec tive Eyewe ar w it h M o u nt Slide the device connector to insert it into the Protective Eyewear with Mount, as shown below.
Trademarks / Third Party Software • EyeTrek INSIGHT is a registered trademark of OLYMPUS CORPORATION. • QR codes are registered trademarks of Denso Wave Incorporated. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,Inc., and any use of such marks by OLYMPUS CORPORATION is under license. • Microsoft®, Windows®, Windows Vista® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
3500 Corporate Parkway, P.O.Box 610, Center Valley, PA 18034-0610, U.S.A. Tel. 484-896-5000 Technical Support (U.S.A. / Canada) 24/7 online automated help : http://www.olympusamerica.com/support Phone customer support : Tel. 1-800-260-1625 (Toll-free) Our phone customer support is available from 9 am to 9 pm (Monday to Friday) ET http://olympusamerica.com/contactus Olympus software updates can be obtained at: http://www.olympusamerica.com/support WP244701 Ver.1.