EN INSTRUCTIONS 2 23 FR MODE D’EMPLOI 45 ES INSTRUCCIONES PO INSTRUÇÕES 67 89 CH CS1080000000– A0702 KR 111
WARNING CONTENTS Read this manual carefully before using your camera. Names of parts Camera body ...................................................................... 4 Viewfinder display/LCD panel ............................................. 5 Using the strap/Diopter adjustment ........................................ 6 Loading and checking the battery ........................................... 7 Loading the film .....................................................................
4 NAMES OF PARTS — Camera Body Selftimer/remote control Viewfinder indicator Autofocus Light sensor夡 window夡 Shutter release button Flash夡 NAMES OF PARTS — Viewfinder Display/LCD Panel 2 3 5 Viewfinder Display 1 Autofocus marks 2 Spot marks 3 Close-up correction marks 4 1 Zoom lever 4 Green lamp Strap eyelet Lights Lens夡 Battery compartment cover Remote control sensor Lens barrier 夡 Always try to keep this clean. Dirt and stains can result in pictures that are unclear and out-of-focus.
6 USING THE STRAP LOADING AND CHECKING THE BATTERY Use one 3 V lithium battery (CR123A or DL123A). Attach the strap as shown. 1. While pressing the bottom of the battery compartment cover in direction 1, turn it in direction 2 to open. 1 Make sure the lens barrier is closed before opening the battery compartment cover. 2. Insert the battery correctly. Close the battery compartment cover. 2 A brand-new battery lasts for about 15 rolls of film. 3. Slide the lens barrier in direction 1 until it clicks.
LOADING THE FILM 8 1 TAKING PICTURES 1. Slide the back cover release upward to open the back cover. 1. Open the lens barrier until it clicks. The lens will extend slightly and the LCD panel will turn on. Compose your shot. Push the zoom lever to the “T” side for telephoto (100mm) or to the “W” side for wide angle (28mm). 1 Do not touch the inside of the camera, especially the lens. 2. Insert the film cartridge until it clicks in position. 2 ISO400 film is recommended.
FLASH PHOTOGRAPHY 10 Setting the Flash Mode This camera has six flash modes. Choose the mode best suited to the photographic conditions and your requirements. Working Distance The distance to your subject is 0.6 m (2.0 ft) to infinity at the wideangle side and 0.8 m (2.6 ft) to infinity at the telephoto side. How to select the mode Press the flash mode button ( ). The mode switches in the order shown below. The selected mode is displayed on the LCD panel.
FLASH PHOTOGRAPHY 12 Auto Flash 1 Flash-Off Use this mode in situations where flash photography is not desired or is prohibited and in twilight or night scenes. 2 1. Press the shutter release button to make sure the orange lamp lights. FLASH PHOTOGRAPHY 2. Press the shutter release button all the way to take the picture. Flash working range (with color negative film) ISO Wide angle (W) Telephoto (T) 100 0.6 to 4.6 m (2.0 to 15.1 ft) 0.8 to 1.8 m (2.6 to 5.9 ft) 200 0.6 to 6.5 m (2.0 to 21.
14 FLASH PHOTOGRAPHY Night Scene Flash Use this mode to clearly shoot a subject in the foreground and a night scene in the background. EXPOSURE MODES Setting the Exposure Mode This camera has three exposure modes. Choose the mode that best suits the conditions and your requirements. How to select the mode Press the flash exposure button ( / ). The mode switches in the order shown below. The selected mode is displayed on the LCD panel. Closing the lens barrier restores the Auto Flash mode.
16 USING THE SELFTIMER/REMOTE CONTROL How to select the mode Press the selftimer/remote control button ( / ). The mode switches in the order shown below. The selected mode is displayed on the LCD panel. Mode display No display RC-300C (Optional) If the selftimer/remote control indicator doesn’t blink even when you press the button, replace the battery with a new one (CR2025). How to replace the battery of the remote control (RC-300C) 1 1.
18 CORRECTING THE DATE AND TIME PRINTING THE DATE/TIME (Quartzdate models only) (Quartzdate models only) Be sure to correct the date and time after the batteries have been inserted or replaced. 1 First select the date/time mode you want to print. Press the MODE button. As you press it, the mode will switch in the order shown below. 1. Keep the MODE button pressed until the “year” indicator starts blinking. Keep the mode you want to print displayed. 2 3 4 5 2.
20 CARE AND STORAGE 앫Do not leave the camera in any place exposed to excessive heat, humidity or direct sunlight — for example, in a car or on the beach. 앫Do not expose the camera to formalin or naphthalene. 앫If the camera gets wet, wipe it with a dry towel. The salt in seawater can be especially damaging. 앫Do not use organic solvents such as alcohol or paint thinner when cleaning the camera. 앫Do not leave the camera on or near a television, refrigerator or other appliance with a magnetic field.
22 Flash modes: Auto Flash (automatic flash activation in low-light, backlight and fluorescent light), Red-Eye Reduction Flash (same as auto otherwise), Flash-Off (flash override with shutter speed extended to 2-sec. max.), Fill-In (forced activation), Night Scene flash (with shutter speed extended to 4-sec. max.) and Red-Eye Reduction Night Scene Flash (with shutter speed extended to 4-sec. max.) Exposure modes: Auto Exposure, Spot Metering and Infinity. Battery check: Displayed on LCD panel.
