Rapid Fire, LAN scout and the Colic clasped hands logo are trademarks of Colic A/S. Colic is a registered trademark of Colic A/S. All other brands or product names are trademarks or registered trademarks of their respective holders. Official A/S reserves the right to modify the information given in this publication without prior notice. ‘The warranty terms and conditions applicable for your purchase of this equipment are given of the dime of purchase. Consult your place of purchase for details.
iii Table of Contents 1. Introduction Package Contents . Using CD-ROM or Disks. . . Online Documentation . . . Troubleshooting and getting Help. . . Late-breaking News . . Rotational Conventions . . 2. Installation Overview 3. Hardware Installation Overview, Installation Requirements. Adapter Installation. .. Connecting the Adapter Cable . . Connecting a Wake-on-LAN Cable (optional) . . 4. Network Driver Installation Why Network Drivers? uns . Supported Environments and Drivers. . Microsoft Windows 95 ..
Net Ware Client 32 for Windows 3.1x .. .28 Net Ware Client 32 for DOS . 29 Nov ell Net Ware Servers. -30 Net Ware 4.x Servers . . 30 Net Ware 3.12 Server, . Lat 18M DOS Environment... . .. 33 IBM DOS LAN Services DLS 33 1BM OS/2 Environment... .35 {BM LAPS LAN Server/Requester 3.0 .35 IBM MOTS LAN Server/Requester 05/2 WARP L386 Configuring the DIS 2.0 MAC Driver .37 DIS 2.0 MAC Driver Messages 37 5. Power Management 39 6. The Colic CD-ROM 1 Colic Adapter Setup Program on CD-ROM.
B.1 DIS 2.0 MAC Driver. . Information messages Wakings. . Errors... B.2 DIS 3 and DIS 4 Mini port Windows 95 and Windows 98. Windows NT DIS 3 and DIS 4 Minion Driver Error Messages . B.3 DOS ODI Driver Common DOS QDI Errors. Appendix A. Driver Messages 59 Errors specific to the OCESXODI.COM DOS obI Driver Net Ware Server ODI and Client 32 Driver Diagnostics Error Messages Ce Appendix B. Abbreviations 69 Appendix C. Technical Information 71 SES LESS ooh 72 Illustrations Figure 1.
About this manual Welcome to this manual and congratulations on selecting the Colic Rapid Fire 2327 Ethernet 10/100 PCI Adapter. This Guide to Operations is directed towards users without prior knowledge of network adapter installation, and it provides the information required to perform a standard installation of the Colic Rapid Fire 2327 Ethernet 10/100 PCI Adapter. The Colic Rapid Fire 2327 Theme 10/100 PCT Adapter will also be referred to as “Rapid Fire 2327 Adapter” in this publication.
1. Introduction The Colic Rapid Fire 2327 Ethernet 10/100 PCI Adapter combines advanced power management facilities with performance optimized and parallel processing drivers to produce industry-leading performance and cost-reducing ease of use.
With the enclosed LAN scout desktop management system You can easily monitor your adapter for network performance and statistics. It features an HTML interface, which allows display of all parameters and statistics on an ordinary web browser. Direct connection to Colic's WEB server enables you to download and update the latest drivers with a simple click of a mouse button.
Colic CD-ROM The Colic CD-ROM contains: — LAN scout Colic desktop management system for Windows 95, Windows 98 and Windows NT — Policewoman Adapter Information for Windows utility for Windows 3.
Colic Disks The Colic disks are: = Colic Setup and Diagnostics Disk (Disk 1) containing: Colic Adapter Setup Program, Diagnostics Program, utilities, and online documentation in Windows help format. — Tomtit Driver Disk (Disk 2) containing most commonly used network drivers.
Troubleshooting and getting Help If the Rapid Fire 2327 Adapter should perform unexpectedly, see chapter 8, Troubleshooting, charier 7, Diagnostics, or the Colic online documentation for guidelines. If yon cannot solve the problem, see chapter 9, Contacting Technical Support for technical assistance, Late-breaking News Additional information (of all kinds) is contained in the HTML and Windows help file online documentation under Late-Breaking News.
2. Installation Overview 1. Install the adapter in one of the computer's PCI expansion slots. Chapter 3, Hardware Installation, explains this in detail. 2. The system BIOS, N Way Auto Negotiation and Parallel Detection automatically assign an interrupt level, an /O range, a memory range, a speed and a duplex mode to the Rapid Fire 2327 Adapter.
3. Hardware Installation Overview This section describes how to install the Rapid Fire 2327 Adapter in one of the expansion slots in your computer. See the computer documentation for additional information on installing expansion cards. The term “computer” is used as a general term to include PC's, computers and computer systems, ® Important: Static electricity can be destructive to sensitive components on the adapter.
8. If the computer supports Wake-on-LAN (which makes it possible to remotely wake up a PC for management purposes), connect the special Wake-on-LAN cable between the PC motherboard and the Rapid Fire 2327 Adapter. See page 11and the computer user guide for further details. 9. Put back the computer top cover, Connecting the Adapter Cable 1. Insert the modular jack in the JR-45 connector. The jack is secured and correctly inserted when you hear a click. — For 10 Bps operation, a category cable is required.
1 Connecting a Wake-on-LAN Cable (optional) » Note: A Wake-on-LAN cable is optional and is not included in the Rapid Fire 2327 Adapter package. The Rapid Fire 2327 Adapter supports Wake-on-LAN by using Auxiliary Power Supply and External Wake Signal. If you want to use this feature, and the PC supports Wake-an-LAN (see the PC user documentation), you must connect a Wake-on-LAN cable between the Rapid Fire 2327 Adapter and the PC motherboard.
12 2. Connect the Wake-on-LAN cable. ‘The Wake-on-LAN cable connectors are identical, and they are coded to ensure that they are not inserted upside down. ® Note: On Carly IBM PCs with Wake-on-LAN support, the Auxiliary Power Supply and External Wake Signal use different connectors, and you need a special cable to connect the Rapid Fire 2327 Adapter. This special cable has a 3-pin connector that connects to the adapter and two 2-pin connectors that matches the IBM connector.
13 4. Network Driver Installation Why Network Drivers? The adapter driver software is an upward interface to Local Ara Network programs required to run applications on an Ethernet Network. Most network operating systems provide facilities for the installation of adapter driver software and, in many cases, Colic drivers are per-defined in the relevant configuration utilities. If a facility lo install Colic drivers is available, use that approach.
14 Microsoft Windows 95 This section describes the procedure for installation in Windows 95. Windows 95 will normally install new devices with little or no user intervention. This is also the case with the Rapid Fire 2327 Adapter. 1. Install the Rapid Fire 2327 Adapter in a free PCI expansion slot, and connect the cable between the adapter and the network as described in chapter 3, Hardware Installation. 2.
15 Microsoft Windows 98 The drivers for the Rapid Fire 2327 Adapter are not included in all Windows 98 packages. You must update your Windows 98 installation to include information about the Rapid Fire 2327 Adapter drivers before installing the adapter. If you have installed the Rapid Fire 2327 Adapter without updating your Windows 98 installation, you may get a rang driver installed for the Rapid Fire 2327 Adapter.
16 Driver Update the “Control Panel” open the “System” menu. In the “System Properties” window, select “Device Manager” and expand the line “Network Adapters” by clicking on “+7, . Select the wrong driver for the Rapid Fire 2327 Adapter. It may be named “PCL Fast Ethernet DEC 21143 Based Adapter”, but other names are also possible. . In the “System Properties” window click on “Properties” . Tn the window for the driver select “Driver” and click on “Update Driver”. .
17 Adapter Parameters To configure the network adapter, open “Network” in the “Control Panel”, select the “Colic Rapid Fire 2327 Ethernet 10/100 PCI Adapter” and click the “Properties” button. Click the “Advanced” tab to set the adapter parameters. The default parameters will work correctly for most configurations. Use defaults if you do not know what the parameters do.
18 Microsoft Windows NT The adapter driver installation procedure for Microsoft Windows NT Workstation is identical to that of Microsoft Windows NT Server. In the following, both will be referred to as Windows NT. The installation procedure is however different for versions 3.5x and 4.0 of Windows NT, Before you begin the installation process, review the “Configuring the Network™ section in the Windows NT System Guide.
18 Driver Installation after Windows NT Installation If you are installing a network adapter after Windows NT has been successfully installed on your system, you must be logged on with administrative rights. This is required to add, configure and remove network adapters in Windows NT. 1. Install the Rapid Fire 2327 Adapter in a free expansion slot as described in chapter 3, Hardware Installation. 2. From the Start menu, select the “Settings”, “Control Panel” and double-click the Network icon.
20 Windows NT 3.5x Driver installation during Windows NT Installation t. When the message “Setup did not detect a network card” displays Install the Rapid Fire 2327 Adapter in a free expansion slot as described in chapter 3, Hardware Installation. . Follow the instructions in the Windows NT System Guide to begin Windows NT installation. . If you have selected custom set-up, select “Do Not Detect” when the “Network Adapter Card Detection” window displays. let “Continue” to go to the adapter card setup phase.
21 10. The settings will not take effect until the system is re-started. System re-start can be initiated by selecting the “Restart now” option in the dialog box shown when you exit the Network Control Panel. > Note: If the system is already using an adapter of the same type, the driver has to be updated manually. See the next steps 10 accomplish this. L. Insert the Colic CD-ROM and copy the file OCESXND3.5YS from the disc to the Windows NT directory “systematization, 2.
22 DIS 4 Mini port The DIS 4 Mini port driver supports the following Windows environments: * Windows 25 version 950B and 950C (OSCAR) * Windows 98 * Windows NT 4.0 To determine which version of Windows 95 you are running see Identifying the Windows 95 Version below. Note: If you have more than one Rapid Fire 2327 Adapter they must all use either the DIS 3 or the DIS 4 driver.
23 Identifying the Windows 95 Version To determine which Windows 95 version you are using, open the Control Panel, select System and read the System information under the General tab. If the version number is 4.00.950 (or 4.00.950A), you are using the first version of Windows 95, which does not support DIS 4 drivers. If the version number is 4.00.950B or 4.00.950C, you are using the OSCAR (OEM Service Release 2) version of Windows 95, which does support the use of DIS 4 drivers.
24 10.In the “Unlisted or Updated Network Adapter” panel, select the “Colic Rapid Fire 2327 Ethernet 10/100 PCI Adapter” and click “OK”, TL.If you need to change any driver parameters, highlight the “Colic Rapid Fire 2327 Ethernet 10/100 PCI Adapter” and click the “Setup...” button int the “Network Drivers” panel. 12.1f you want to change any of the parameters for the DIS driver, click the “Advanced...
25 Multiple Adapter Configuration (WfW 3.17) You may install up to four Rapid Fire 2327 Adapters in your computer (ap to two in DOS systems). Observe the following guidelines if installing more than one adapter, If your network operating systems is IBM LAN Server or Microsoft Windows for Work groups, the network installation utilities provided with the system execute configuration with multiple adapters. The new PROTOCOL will have two or more driver sections.
26 Nov ell Net Ware Workstations If the Nov ell Net Ware version provides installation support for Colic adapters and drivers, use the native NOS installation utility. Otherwise, proceed with the relevant section in this chapter. ‘With Nov ell server operating systems up te version 3,11, Nov ell shipped the NEXT client software. With versions 3.12 and 4.x, Nov ell ships the VLM client software.
27 3. Insert the following line in the file AUTOCRATIC: DIOCESE! DIOCESE must be loaded after LSL, but before any protocol stacks (for example, IPXODI). Sample AUTO EXEC BAT: LSL (Link support module, Nov ell supplied) DIOCESE (Ethernet ODI driver) 1PXODI (IPX/SPX Protocol module, Nov ell supplied) NEXT (Net Ware Requester, Nov ell supplied) Other protocol stacks and requester are possible. See the Nov ell Net Ware documentation. 4.
28 Net Ware Client 32 for Windows 95 This installation requires: * Nov ell Net Ware Client 32 for Windows 95 installation disks or CD-ROM * Microsoft Windows 95 CD-ROM * Colic CD-ROM or Driver Disk The installation consists of two steps: 1. Installing the Windows 95 Mini port driver 2. Installing the Wetware Client 32 software Installing the Windows 95 Mini port Driver If your Windows 95 driver is already installed and running, proceed to Installing the Net Ware Client 32 Software.
29 Net Ware Client 32 for Windows 3.1x This installation requires: Nov ell Net Ware Client 32 for DOS/Windows 3.1 installation disks or CAROM Colic CD-ROM or Driver Disk Net Ware Client 32 version 2.20 i Run the install program on the Net Ware Client 32 for DOS/Windows 3.1% installation disks, and follow the installation guidelines given by Nov ell. See the Nov ell Net Ware installation guide for details. . When prompted for LAN adapter, select “HAVE DISK”.
30 Nov ell Net Ware Servers The Rapid Fire 2327 Adapter may be installed in Net Ware 3.12 and 4.x servers, Error messages and suggested actions for Net Ware are described in appendix B. Net Ware 4.x Servers 1. Tf the Net Ware 4.x server operating system has not been installed already, install it now. As part of the installation process, the INSTALL utility prompts for a LAN driver. Proceed to step 4. 2. If the server is up, load the INSTALL NLM utility at the server console, 3.
n 2. If you have problems loading the driver on multiple adapters and the initialization fails due to “Insufficient CBS, increase the number of buffers allocated to the server. Add the following to STARTUP: SET MINIMUM PACKET RECEIVE BUFFERS = 100 (or larger) SET MAXIMUM PACKET RECEIVE BUFFERS = 500 (or larger) The MINIMUM value specified must be at feast 30 times the number of Wildfire 2327 Adapters in the computer.
32 Hints IPX internal router configuration (a server with two adapters, each connected to a different network), the data transfer rate across the router can be low. This happens if client workstations have CPU speeds equal to or higher than the server.
33 IBM DOS Environment IBM DOS LAN Services DLS The adapter driver can be installed either during DOS LAN Services installation or after DOS LAN Services has been successfully installed. The installation described below covers DOS LAN Services versions 4.0 and 5.0. Driver Installation during DOS LAN Services Installation 1. 9. Start the installation as described by IBM with the following command: ANN STALL .
34 Rapidness 2327 Ethernet 10/100 PCY Ads pier v. 100.00, 5. Select “Network card not shown in list below” and press Enter to continue. 6. Insert the Colic CD-ROM and specify the location of the MOUSETRAPPING file to be DIMINISH. DOS 7. Press Enter to continue. 8. Select “Colic Rapid Fire 2327 Ethernet 10/100 PCI Adapter” and change if required the default settings by selecting “Edit settings for network card driver”. 9. Select “Driver configuration is correct” and press Enter to continue, 10.
35 IBM 0S/2 Environment IBM LAN Server products use the DIS interface. The DIS 2.0 drivers for DOS and OS/2 are also referred to as MAC drivers. ® Note: When you install files from the Colic CD-ROM disc using LAPS or MOTS, the installed files are read-only. If LAPS or MOTS fails to install certain files, it can be because they already exist and are read-only.
36 9. . Select “Colic Rapid Fire 2327 Ethernet 10/100 PCI Adapter” as the network adapter hy adding it to “Current Configuration”. The parameters of the Colic adapter may now be edited. . Select “Colic Rapid Fire 2327 Ethernet 10/100 PCI Adapter” in the current configuration list and then “Edit”. Select “OK” when the parameters for the adapter are correct. 10. Add and configure protocols to suit the requirements. 11. Select “OK” when the configuration of the LAN Transports is complete. 12.
M 6. The Colic CD-ROM Insert the Colic CD-ROM to start the CD-ROM Menu. If the operating system does not have an Auto Play function or the function is disabled, run DASETUPEXE. Note: If your CD-ROM drive letter is not “DI”, substitute it with the correct drive letter. Figure 5. CD-ROM Menu (Windows version) Launch the Setup Program This will start the Setup program. For a description on the Setup program see Colic Adapter Setup Program on CD-ROM on page 42.
42 Make Install Disks. Install disks for use on systems without a CD-ROM drive can be generated. This includes a copy of the supplied Colic Setup Disk and the Colic Driver Disk, and environment specific install disks for Windows 95/98, Windows NT, Nov ell, DOS and 0872. Install Adobe Acrobat Reader. Installs version 3.0 which is required to view the Guide to Operations manual in PDF format.
43 DOS, Windows 3.x In DOS and Windows 3.x the Colic Adapter Setup Program can be used to install the online documentation, Adapter Information for Windows and DMI 1 rapport, Figure 7. Adapter Setup Program DOS and Windows 3.x Select “Installation Overview" ar “Help” to access the online documentation, or select “Utility Installation” to install] the utilities that come with the adapter.
44 LAN scout and Utilities LAN scout and four utilities are available with the Rapid Fire 2327 Adapter.
a5 System Requirements * Microsoft Windows 95/98 or Windows NT * Win Sock I (TCP/IP) installed * Display resolution: 800x600 or higher is recommended * Display colors: 65536 (16 bit) or higher is recommended * An Colic Windows 95/98 or Windows NT driver: OCTE5SXND3.SYS (DIS 3 Mini port driver) or OCTESXND4.SYS (DIS 4 Mini port driver) Installing LAN scout Note: Consular can only be installed from the CD-ROM. 1. Insert the CD-ROM.
48 Adapter Information for Windows AIW The Adapter Information for Windows (AIW) program displays information about the adapter and the adapter driver. The program can be used in Windows 3.x. If running Windows 95/98 or Windows NT, you must use LAN scout. Different information about adapter, driver and network traffic can be shown, but only for the local system, If needed, configuration data can be saved to a file or printed. System Requirements * Microsoft Windows 3.1x or Windows for Work groups 3.
47 7. Diagnostics The Rapid Fire 2327 Adapter is supplied with a diagnostics program that can be used for: * Testing the adapter and the adapter cable(s) if you suspect a problem. * Viewing the current adapter configuration ® Important: The Diagnostics Program must be run from the Colic Setup Disk. Running the Diagnostics Program 1. Make sure that the adapter is connected fo the network. 2. Insert the Colic Setup Disk in the disk drive. 3. Boot the system from the Colic Setup Disk.
a8 Additional Information See also the Diagnostics Program online help for further information about the program. a Retrofire 2327 Theme 10/100 PCT Adapter v. 1.00.
49 8. Troubleshooting Problems and Solutions Problem Solutions You are informed: “No adapter found” Make sure the adapter is seated firmly in the slot. Make sure the adapter is inserted in a PCT bushmaster slot. Try a different PCI bushmaster slot. LINK LED (green) does not light. (The status LED are described in figure 8 on page 50). Make sure you have loaded the network drivers. Check all connections at the adapter and the hub. Try another port on the hub.
50 The adapter stopped Ensure that the adapter is firmly seated. working when another Run the adapter diagnostics, adapter was installed in Make sure that the cable is connected to the PCT the PC. Adapter and not another device. See “BIOS Settings” on the next page. The adapter seems to Make sure that the adapter Connection Type work OK, but it matches the Connection Type for the Port on the sometimes performs switch. slowly or loses the network connection when using an Ethernet switch, “ACTIVITY” green.
51 BIOS Settings The Rapid Fire 2327 Adapter is self-configuring so for most PIC-bus computers you need only install your adapter in a PCI bushmaster slot and power-up your computer. The computer BIOS automatically configures the adapter. In some PCI computers the PCI interrupt ANTI mus be assigned to any available ISA interrupt. This is normally done with a jumper on the motherboard or the computer PCI BIOS SETUP.
9. Contacting Technical Support If support is not provided by your organization or the local vendor, you can at any time relay information to or contact Colic Technical Support via one of the listed services. In addition, BBS, e-mail, FTP or WWW provide up-to-date software updates, application notes, quick fixes and various utilities which may solve your problem.
54 Bulletin Board Service All Colic's support services are available via our BBS: software updates, application notes, quick fixes, various utilities, ete. The Bulletin Board Service (BBS) can be contacted using either a standard modem or an DISDAIN modem. Standard Modem Requirements Modem speed: 2400, 4800, 7200, 9600, 12000, 14400, 28800 bps Modem standard: ~~ CIT V2 1V22/V22bis/V32/V34/VA2bis/ HST/MNPS i N (none) i. 8 Stop bits: 1 Transfer protocols: Modem, Modem, Modem, Kermit and Sealing.
55 Internet World Wide Web Server (WWW) The Colic WWW server contains up-to-date information about Colic products, newsletters and press releases. It also contains addresses of all Colic offices and support centers worldwide. Our software library contains the latest driver and software revisions.
56 Problem Report Form Fill in both sides of this Problem Report Form, print oot the relevant system configuration files and FAX or mail to Colic Technical Su port. You can also fill in and send a Problem Report Form from Colic's web site on the Internet. Problem Description Network Information Rapidness 2027 Ethernet )7100 PCL Adapter v. 100.
57 Adapter Information Adapter type/name ECO level and serial number (see labels on the back of the adapter) VO address Interrupt Driver information Driver disk version Operating system Network OS Driver name Version (usually the same as file time stamp) PC Information PC type/vendor/model Bus type/processor Memory Additional boards BIOS version Motherboard rev.
58 Appendix A. Driver Messages This appendix consists of five sections. Each section describes driver messages and return codes that may appear during installation and operation with the Rapid Fire 2327 Adapter and the network operating system or Support program. The sections cover the following topics: Section B.1, DIS 2.6 MAC Driver Describes error messages generated by the DIS 2.0 driver. Section B.2, DIS 3 and DIS 4 Driver Describes error messages generated hy the DIS 3 driver. Section B.
60 B.1 DIS 2.0 MAC Driver The DIS 2.0 drivers, OCESXND2.DOS and OCESXND2.0S2 may generate the following warnings and error messages. Information messages During driver load, a sign-on banner like the following is displayed: DOS BIDS 2.02: MAC Driver for Rapid fire Ethernet 10/100 Adapter vixen (cookout) Copyright 1538, colic A/S. ALL Rights Reserved. 2327 NAC driver installed. Port CORPORA, IRQ OFh, Device OCh, Slot 01. 100 Mops (TP). Half duplex operation detected.
61 Errors Error messages displays fatal errors detected during driver load. Failure: PROTOCOL does not have an sentry for PROCESS. There are no sections in PROTOCOL for the EXCESS driver. Review the PROTOCOL fife. Failure: PROTOCOL does not have a valid DRIVEN. The driver name is not valid in the PROCESS section in PROTOCOL Review the PROTOCOL file. Failure: Called to allocate memory (x). The driver was not able to allocate the memory it iced either in high (above 1M bytes) nor in low memory.
62 B.2 DIS 3 and DIS 4 Mini port Driver The DIS 3 and DIS 4 error messages reported under Microsoft Windows 95, Microsoft Windows 98 and Microsoft Windows NT are identical. However, the way in which the errors are reported to the user differs. Windows 95 and Windows 98 In Windows 95 and Windows 98 error codes reported by the DIS 3 Mini port driver are written to the NDISLOG.TXT file located in your Windows directory.
63 DIS 3 and DIS 4 Mini port Driver Error Messages For each error message below the first line contains the error code used by Windows 95/98. The second line contains the “Event ID” and “Data” fields used by Windows NT. Code Description 1388 Resource Conflict 5000 SUCCESSION: Has encounters s conflict in resources and cold not load. ‘Action: Check the resources used by the network adapters) ta ensure, that no conflicts exists.
64 B.3 DOS ODI Driver This text describes the possible error messages displayed by the DOS ODI driver, OCESXODI.COM. Most of the error messages are listed with no further explanation as the error message itself gives sufficient information on cause and action to take, The DOS ODI driver can display error messages when the driver loads. The error messages can be displayed in two ways: “Archdiocese just “teletext. Common DOS ODI Errors DIOCESE-DOS-1 The LSL is not loaded.
65 OCESXODI-DOH-19 An invalid Ethernet node address is specified in BEYER. The driver modified the incorrect address bits Locate and fix the error in NETTING. See also the Net Ware documentation. DIOCESE-DOS-21 A program hooked Int after the LID. As stated. ODIOUSNESS-DOS-27 This driver requires LST version 2.11 or higher. As stated. DIOCESE-DOS-29 Tha driver did not load. As stated. DIOCESE-DOS-31 A missing or invalid value wam specified ox line . Locate and fix the error in NETTING.
66 DIOCESE-DOS-22% FATAL: PCT BIOS allocated an illegal Interrupt to Dec Chip 21401 Action: The BIOS assigned an interrupt hat is not supported by the driver. Run the system setup program and check the interrupt values and/or use Hi Kagoshima program.
67 Adapter Internal failure. Action: Can be 3 PCI BIOS problem: or an adapter malfunction. Check your PCI BIOS revision, run the. system setup program and use the Diagnostics program, Internal CHC table corrupted. Action: A fatal error has occurred. Note the core message and contact Comic Technical Support, Unable to allocate memory. Action: Decrease setting for some Buffers, For example “Set Minimum Packet Receive Buffers = ¥xxx” in STARTUP Unexpected 08 behavior. Driver supports 3.11 and later.
68 B.5 Diagnostics Error Messages If errors are detected, make sure that; * The cabling matches the current test mode The cabling is properly connected *® The connectors are free of physical damage The adapter speed matches the network speed * No resource conflicts present (VO address range, interrupt level, and such.) ® Note: Running the test on a heavily-loaded network may cause the Transmit/ Receive test to report errors.
89 Appendix B.
70 RPL Remote Program Load VLM Virtual Loadable Module VOL Wake-on-LAN Rapid Fie 2327 Biochemist 10/100 PCT Adapter v. 1.00.
71 Appendix C. Controller: Media connector: Power requirements: Operating temperature: Humidity (relative): Size: On-board memory: Network Interface: Certification: TO window: Memory window: Data Path Width: Data Transfer: Interrupt Level: LED Indicators: Rapid Fin: 2377 Ethernet 10/100 PC) Ada pier +, 1.00.40, Technical Information DIGITAL 21143-PD 8-pin JR-45 for UTP with on-board media filter JR-45 Figure 9.
index-1 Index A abbreviations 69 AC PI 1,39 B back panel 9 bulletin bored service (BBS) 54 Cc CD-ROM 2,41 configuration connector 71 MAC driver 37 connectors 71 D diagnostics 47 disks 4 DOS environments 33 driver installation 13 driver messages 59 E e-mail 54 expansion slot F FTP server 54 H help, online 4 hotlink supp on 53 BM DOS LAN Services 33 LAN Server 3.0 35 LAN Server (45/2 WARP 36.
index-2 Pp peripheral units 9 power management 39 power-supply cables 9 problem report form 56 protocol stacks 27 S supplied items 2 support web 55 support, technical $3 T technical data 7t technical support e-mail 54 fax 53 hotlink 53 WEB 55 technical support, getting in touch with 53 troubleshooting 49 u utilities 41 w Wake-on-LAN 1, 11,29 web browser 41 WIW31123 Windows 95 14 Windows 98 15 Windows for Work groups 3.11 23 Windows NT 13 WWW server 55 Rapid Fire 2327 Theme {07100 PCT Adapter v. 1.00.