User's Manual

Indicator light Operate instruction
Attention
1.When unlocking by Bluetooth and fingerprint not registered, a
red light flashes to indicate Bluetooth awakened by touching
fingerprint panel.
2.Flashing blue light 2 times indicates to unlock successfully,
flashing 3 times indicates to be locked.
Long time flashing a blue light indicates that it connects with
phone’Bluetooth;
3.It flashes no light when the lock disconnects with phone’s
Bluetooth or does not operate for 45s during connected with
phone’Bluetooth.
4.Flashing a blue light indicates that the lock has opened
successfully by fingerprinting.
5.Flashing a red light indicates that lock fails to open.
Flashing red light and blue light alternatively indicate that the
lock is in low battery and need to charge.
6.It flashes green light to indicate in charging. It flashes green
light for long time when battery is charged up to 90%. It does not
flash light when full charged.
It prompts to allow the permission of
Bluetooth and Location in the process of
installation.
1.Android phones must allow the permission
before opening the lock normally.
2.iPhones must allow the permission of
Bluetooth to unlock at least.
When using the lock, if Bluetooth is on, the
APP is still prompting "please turn on
Bluetooth" continuously,
1.iphone user please allow the permission of
Bluetooth by entering "Settings" button to
find WeChat or OKLOK+ APP;
2.android phones users please go to Settings
- Apps & notifications -Permission - find
"OKLOK+"- Open Bluetooth permission and
location permission.
TECHNOLOGY HAS CHANGED LIFE TECHNOLOGY HAS CHANGED LIFE TECHNOLOGY HAS CHANGED LIFE TECHNOLOGY HAS CHANGED LIFE TECHNOLOGY HAS CHANGED LIFE TECHNOLOGY HAS CHANGED LIFE TECHNOLOGY HAS CHANGED LIFE
User Manual
Bluetooth & Fingerprint Smart Lock
Download APP
1.iPhone users can download the App
by searching for "OKLOK+" in App Store.
2.Android phone users can download
the App in Google Play or by searching
for "OKLOK+" in App store. It can also
download through browser(Open the
browser - Click " " - Scan the QR
code attached with lock - Enter the
download link - Click to download - the
installation package will save in the
browser "my download" - Click "install
"after downloaded).
Register an account
For the first time it need to
register an account of
OKLOK+ APP: Open the
APP - Click "Register an
account" button - Enter
phone number(only China
mainland) or email
address - Click "get code" -
Input the verification code
(from SMS or mailbox)- Set
password-Click"login". It
completes the registration
process.
Add the lock
Register fingerprints
After registered, enter the APP - Click " "icon on
the right side - Scan the QR code attached with lock -
Rename the lock - Touch fingerprint panel ( to wake
up the lock) - Lock flashes light - Open successfully
(means completed adding.)
Open the lock by App -Click the lock name- Click "Finger"
button- Click "Fingerprint setting" at the bottom - Set a name
for the fingerprint - Press on fingerprint panel 5 times - Finish
registration(your fingerprint will show in the page of
fingerprint management.)
TECHNOLOGY HAS CHANGED LIFE
If the QR code lost, it can add the lock by Bluetooth
searching. Make phone close to the lock - Click " " in the
screen- Touch fingerprint panel (to wake up the lock) - Lock
lashes light) - Click the device named of "OK" - Click
"Immediately binding" - Open successfully (means
completed adding).
Delete the lock: Click the device name-- Enter unlocking
page- Click button-Click "Ubind" and "confirm"
button.
Attention
The first user adding the lock will become the administrator of
the lock. To change administrator, the current administrator
must delete the lock from his/her account.New administrator
adds the lock by re-scaning the QR code or searching
Bluetooth. To save memory space, please delete all
unnecessary fingerprints of old accounts.
1 2 3 4 5 6 7 8 9