User's Manual

嘉兴礼海电气科技有限公司

OKIN Refined Electric Technology Co., Ltd

Page 1 of 2

Operating Manual of Remote Control system

1. Interface of the remote control

2. Button description

A. HEAD UP button：Press and hold the button, the Head actuatorwill go up. Stop when

released.

B. HEAD DN button：Press and hold the button, the Head actuator will go down. Stop when

released.

C. FOOT UP button：Press and hold the button, the Foot actuator will go up. Stop when

released.

D. FOOT DN button：Press and hold the button, the Foot actuator will go down. Stop when

released.

E. ZERO button: Click the button, the Head and Foot actuator will start up simultaneously

and keep running until arriving to the zero gravity position. Running can be stopped by

clicking any button.

F. FLAT button: Click the button, the Head and Foot actuator will start up simultaneously and

keep running until arriving to their low limited switches,. Running can be stopped by

clicking any button.

HEAD UP

HEAD DN

FLAT

FOOT UP

FOOT DN

ZERO

PAGE 1
嘉兴礼海电气科技有限公司 OKIN Refined Electric Technology Co., Ltd Operating Manual of Remote Control system 1. Interface of the remote control HEAD UP HEAD DN FLAT ZERO FOOT UP FOOT DN 2. Button description A. HEAD UP button：Press and hold the button, the Head actuatorwill go up. Stop when released. B. HEAD DN button：Press and hold the button, the Head actuator will go down. Stop when released. C. FOOT UP button：Press and hold the button, the Foot actuator will go up. Stop when released. D.
PAGE 2
嘉兴礼海电气科技有限公司 OKIN Refined Electric Technology Co.,Ltd The blue LEDs for backlight are on as long as any button is pressed. IF all buttons are released the LEDs will automatically turn off three seconds later. The blue LED for power is always on as long as the power on. FCC： Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.