User's Manual

OKIN Refined Electric Technology Co., Ltd

Operating Manual of Remote Hand Control

1、 Interface of the Handset

2、 Button description

A．Press button(S1) and hold until you bring the chair to a seated position. If you

release the button, the motor will immediately shut off.

B．Press button(S2) and hold until you bring the chair to a reclined position. If you

release the button, the motor will immediately shut off.

C．Double press button(S3) and the Remote handset will enter a connecting state

for 30s. During this time, If a nearby Control box is also in connecting state, they

will be connected with each other.

3、 indicator light description

A. Only orange light flashing indicates that the motor is running to a seated

position normally.

B. Only blue light flashing mostly indicates that the motor is running to a reclined

S1 S2

PAGE 1
OKIN Refined Electric Technology Co., Ltd Operating Manual of Remote Hand Control 1、 Interface of the Handset S1 S2 S3 2、 Button description A．Press button(S1) and hold until you bring the chair to a seated position. If you release the button, the motor will immediately shut off. B．Press button(S2) and hold until you bring the chair to a reclined position. If you release the button, the motor will immediately shut off.
PAGE 2
OKIN Refined Electric Technology Co., Ltd position normally. Sometimes, it indicates the Remote handset being in a connecting state. C. Both of the indicator lights flashing 3 times indicates something wrong happened to the Remote handset during operation, as follows: a. In connecting state, the Remote handset fail to connect to a Control box. b. In connected state, if you press button(S1 or S2), the control commands cannot reach the Control box.
PAGE 3
OKIN Refined Electric Technology Co., Ltd time, you should repeat step2 ~ step4. FCC STATEMENT: 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2.