User's Manual

ManualsBrandsOKIN Refined Electric Technology ManualsElectronicsWireless remote handset

OKIN Refined Electric Technology Co., Ltd

Page 1 of 4

Operating Manual of Remote Hand Control

Connect diagram please see the drawing：”System Diagram-Scape Bed Controls”

“System Diagram-Scape Bed Controls”

1、Interface of the Handset

2、Button description

Reading/TV Position button：Press the button and the head motor will move up to

the highest and stop, at the same time, the foot motor will touch bottom and stop. You can

press any button to stop action during moving.

Summary of content (4 pages)

PAGE 1
OKIN Refined Electric Technology Co., Ltd Operating Manual of Remote Hand Control Connect diagram please see the drawing：”System Diagram-Scape Bed Controls” “System Diagram-Scape Bed Controls” 1、Interface of the Handset 2、Button description A. Reading/TV Position button：Press the button and the head motor will move up to the highest and stop, at the same time, the foot motor will touch bottom and stop. You can press any button to stop action during moving.
PAGE 2
OKIN Refined Electric Technology Co.,Ltd B. HEAD button：Press and hold the button, the head motor will go up or down. C. FEET button：Press and hold the button, the foot motor will go up or down. D. Z-G button: Press the button, the head and foot motor will move simultaneously and do not stop until return to the position of the system set. You can press any button to stop action during moving. Optional：The Z-G button can be set as a memory button by user. See point 4. E.
PAGE 3
OKIN Refined Electric Technology Co.,Ltd Step 5: Press and hold up button and up button until backlight LED flashing. Loose the two buttons and LED continue flashing and search with control box, once LED stop flashing the matching is successful, which means the control box and the handset can work together. All matching set up process must finish in 30sec after power on control box. Notes：USB cable only use for synchronized operation of two beds.
PAGE 4
OKIN Refined Electric Technology Co.,Ltd However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.