Issue department：Bedding Division Product Function instruction Date： Author： 2017-05-03 Kyle No：CU358-3-S Version： 1.1 Page 1 of 5 CU358-3-S CU358-3-S Function instruction 1.
Issue department：Bedding Division Product Function instruction Date： Author： No：CU358-3-S Version： 1.1 Page 2 of 5 CU358-3-S 2. Function Picture 1. 2017-05-03 Kyle Process of test 1.1. HEAD port Connect to head actuator,control by remote single: Click head up button on the remote, head actuator moves out, stop when released； Click head down button，head actuator moves in, stop when released； This function takes effect only by pressing the corresponding button on the remote. 1.2.
Issue department：Bedding Division Product Function instruction Date： Author： 2017-05-03 Kyle No：CU358-3-S Version： 1.1 Page 3 of 5 CU358-3-S Click foot up button，foot actuator moves out，stop when released； Click foot down button，foot actuator moves in，stop when released； This function takes effect only by pressing the corresponding button on the remote. 1.3.
Issue department：Bedding Division Product Function instruction Date： Author： 2017-05-03 Kyle No：CU358-3-S Version： 1.1 Page 4 of 5 CU358-3-S 1.8. Power LED & PAIRING LED Power supply for control box, PAIRING LED of control box flashes for 4 times,and then turns off, POWER LED turns on。 1.9. Power Connect to the 29V DC; 1.10. RESET button Press and hold the RESET button，the Head, Foot and Lumber actuators will moves to lower position. 1.11.
Issue department：Bedding Division Product Function instruction Date： Author： 2017-05-03 Kyle No：CU358-3-S Version： 1.1 Page 5 of 5 CU358-3-S 1.14. ZERO G position function Press and release ZERO G button on remote，the head and foot actuator moves to preset memory position，stop when press any button； This function takes effect only by pressing the corresponding button on the remote. 1.15.
