User Manual Wiring Guide of Control Box JLDP.1 4. 027. 00 0 R5.41 3. 01 . 005 R5.11 3. 00. 011 JL DP.1 0. 02 3. 000 R5.414.01.001 FD.07.01.01 R5. 5 04. 01 . 25 0 R5.21 7. 01 . 01 6 FCC ID: PCU-CB4243 IC: 21319-CB4243 FCC ID: PCU-RF3022 IC: 21319-RF3022 R5. 41 0. 01 . 009 JLDQ. 9. 001 .1 30C JLDQ. 1 6. 228. 31 JLDQ. 1 6. 263. 84 B.1 5 055 B.
After the control box is powered on, the PAIR indicator can be paired with handset when it is in green state. Press the PAIR button twice to enter the pairing status. PAIR indicator LED PAIR button When the blue light of control box is on, press and hold the PAIR button on handset. At this time, it is being paired. After the pairing is successful, the green light will turn blue.
Network Matching Guide of SleepCare APP App download The app is currently in beta, so the app is not on the App Store, but on the dandelion platform. Users can download the app from dandelion in two ways. 1.1 Website download: Enter in the browser, https://www.pgyer.com/Sleep 1.2 QR code download: Scan the QR code with the mobile phone scanning tool and enter the above URL. 2.
3. Click the "Install" button on your phone to download the app to your phone 4. After the download is complete, if you click App, the pop-up window will pop up to remind you that “the company certificate is not trusted”. Under the patch of Settings -> General -> Device Management -> Select "Okin Refined Electric Technology Co.
. Open App Register & Login 1. Register Click “Sign Up” button on the login screen to enter the registration interface. Mobile phone registration or email registration must pass the verification code to register successfully. The country code is required before the mobile number.
2. Login Enter the user name and password on the user login screen and click the “Sign in” button to login. It should be noted that if you login with your mobile phone number, you need to add the country code before the mobile phone number. The Chinese mobile phone number is “+86” and the US mobile phone number is “+1”. 3.
(b) Test account 2:Devine.He@refinedchina.com Password:a12345678 Network matching process 0. Connect your phone to a WiFi The selected WiFi is the WiFi you want the device to connect to 1. The device enters AP mode Press and hold the FLAT and ANTI-SNORE buttons for more than 5 seconds until you see the handset light flash. Which indicates that the device enters AP mode. Press more than 5s Tick "Confirm that the device has been in the AP mode". Click "Next" button.
2. Enter WiFi and password Enter the current WiFi password and click Next to enter next step.
3. Connect phone to the device through AP mode App Click “Go to setting” to enter the phone settings interface. Select the ore_xxxxx connection in Settings > WLAN. 4. Return to App After returning to the app, the app will send the WiFi and WiFi passwords to the device. After a while, if the connection is successful, App will display the following interface; If the connection fails, exit the AP mode and re-configure the network.
Operations Guide of SleepCare App Real-time data Respiratory rate Out of bed In bed Body mowement Figure 7 real-time data a) If the current device is not online, it will display that the device is "Devine Offline". b) If there is no device currently bound, it will display “Bind”, click to enter network matching interface. c) If there are other problems with the device, it will display the device's error message. d) The device will open real-time data each time you enter the current interface.
Sleep aid music player Figure8 Sleep aid music player a) You can change the progress of the currently playing music by swiping the slide box b) Click c) Click button to select the previous sleep music button to select the next sleep music d) Click button to let the current music starts playing or continues playing, click button to pause the current music.
b) Real-time data changes once per second c) If the current device is not online, it will display that the device is "Devine Offline" d) If there is no device currently bound, it will display “Bind”, click to enter network matching interface. e) If there are other problems with the device, it will display the device's error message.
Figure11 Daily report data 2 Date selection Click to enter the calendar interface 14 to select the previous day and the day after.
Figure 12 Calendar interface a) Click "<" button to switch to the previous month, and click ">" button to switch to the next month. b) Every time you enter the calendar interface, the current date selected will be today. c) You can only choose date up to today, and you cannot choose tomorrow and future dates. d) After selecting the date, clicking “Done” will return to the daily report interface.
History data Figure13 History data 1 Figure14 History data 1 a) The histogram above the historical data can be swiped left and right to switch the currently selected date. b) After the histogram slides left and right to stop, the detailed data below shows the detailed data of the currently selected date.
c) The day, week, year, and month selection boxes can be clicked. After clicking, the current historical data type will change the statistical mode to select the day, week, year, month, etc. d) Detailed data can be swept up and down Control module motor Figure15 Control module a) If the device is not online, clicking all the buttons will pop up b) The app will update the device status only when entering the interface and changing the control type.
Position control Figure16 Position control a) If the current device is two-motor configuration, “Back” and “Lumbar” will be grey and cannot be clicked; If the current device is a three-motor configuration, “Back” will be grey and cannot be clicked. If it is a four-motor configuration, all buttons can be clicked. b) Click button and the head actuator will move out. At this time, the other button functions on the APP will be invalid. If the button is released, the actuator stops.
f) Click button and the lumbar actuator will move out. At this time, the other button functions on the APP will be invalid. If the button is released, the actuator stops. g) Click button and the lumbar actuator will move in. At this time, the other button functions on the APP will be invalid. If the button is released, the actuator stops. h) Click button and the back actuator will move out. At this time, the other button functions on the APP will be invalid. If the button is released, the actuator stops.
Massage motor Figure17 Massage motor a) The state of the massage motor is updated each time you enter this interface. b) Click c) Click button to turn on/off massage motor button to switch massage time of 10 min, 20 min, 30 min. d) Click button to switch massage waveform, there are 4 waveforms, single cycle switching.
switching, The current number of segments indicates the current foot massage intensity g) Click button to turn on/off under bed light. Alarm clock Figure18 Alarm clock a) The status of the current alarm is updated each time you enter the interface. b) Click button to turn on/off massage motor. When the switch is turned on, the currently selected time, wake-up mode, and alarm are saved.
corresponding week which will be repeated. to enter the wake-up mode selection interface, e) Click select the corresponding wake-up mode, when the alarm time is reached, it will wake up by the wake-up method. f) Click to enter the alarm selection mode and select the corresponding alarm clock. When the alarm time is reached, the app will display a notification and have a selected ringtone. Account management Figure10 Account management a) Click b) Click currently bound by the user.
User information management interface a) Click the button to change the username. b) Click the button to upload the user avatar. c) Click the button to change the user age. d) Click the button to edit user gender. e) Click the button to modify the user's height. f) Click the g) Click the 23 button to modify the user's weight. button to log out the user.
Device information management Figure21 Device information management a) Each time you enter the interface, the information of the device currently bound will be refreshed. b) Below the device preview image currently bound. c) Button bound, click to modify the device name. shows the name of the device shows the name of the device currently d) Button shows the version number of the device currently bound, it is unable to click currently.
e) Button displays the name of Wifi which the device is bound currently. It cannot be clicked and modified f) Click to enter the network re-matching interface. Generally it is used for WiFi changes, etc., and will not release the current device binding, that is, if the network is re-matched, the original matching status and binding status are still there. g) Click to enter the device unbinding interface, which will unbind the device from the current account. You need to re-match the network to operate.