User's Manual

03/13
06/13
※
※
3
8
10
2
1
7
9
8
14
13
11
12
4
5
6
Tour Guide System
On / Off
Press and hold ( ) for 1 sec. and the power is on.
Press and hold ( ) for 2 sec. and the power is off.
OFF display on screen.
Channel Select
Press or button, enter into the select mode.
Lock / Unlock Button
Channel will be lock automatically without any buttons
pressed. LCD displayed lock icon. In lock mode, the
power can be off, but channel number cannot be
changed.
When locked, press or button up to 1 sec to unlock.
Unlock icon will not be showing on LCD screen.
LED/ Battery Status
Transmitter:
Receiver:
LED lights blue when the battery is sufficient.
LED lights red when the battery is insufficient.
LED lights off when no signal is received but the battery
is sufficient.
LED lights red when signal is received but the battery
is insufficient.
Battery Saving (only for Receiver)
The power will off when no signal is received within 20 mins.
Set up/ Installations
※
※
Power Output
Transmitter: power output switch
Receiver: Distance switch
Switch UP/ DOWN to desired power output
Switch UP/ DOWN to desired distance range
UP (HI), DOWN (LOW)
UP (HI), DOWN (LOW)
Group Channel Setting
In OFF mode, press and to enter into setting mode. LCD
displays channel numbers. Press and to select.
Press power button ( ) to confirm or quit in 5 seconds without
any buttons pressed.
When group channel number is changed, channel default setting
is CH1.
Transmitter:
Power output switch (Hi / Low)
Receiver:
Distance switch (Hi / Low)
13
14
Battery cover
Buckle clip
Strap hole
12
11
Charging contacts
Mute button
Mic. In (Transmitter)
Earphone jack (Receiver)
Hidden Mic. (Transmitter)
Power
UP / DOWN button
Aux In (Transmitter)
Volume wheel (Receiver)
LCD screen
Antenna
1
4
2
3
9
10
6
7
8
5
Battery / Signal indicator
Manual
(Front view) (Side view)
(Rear view)
(Top view)
(Bottom view)
Notice: The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to
the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements
and void user’s authority to operate the device.
Consumer Alert
Most users do not need a license to operate this wireless microphone system. Nevertheless,
operating this microphone system without a license is subject to certain restrictions: The system
may not cause harmful interference; it must operate at a low power level (not in excess of 50
milliwatts); and it has no protection from interference received from any other device. Purchasers
should also be aware that the FCC is currently evaluating use of wireless microphone systems, and
these rules are subject to change.
For more information, call the FCC at 1–888–CALL–FCC (TTY: 1–888–TELL–FCC) or visit the FCC’s
wireless microphone Web site at http://www.fcc.gov/cgb/wirelessmicrophones.
Specifications are subject to change without prior notice.
※
(WT-500T)
(WT-500R)
(WT-500T)
(WT-500R)