User's Guide UHF-PLL STATIONERY TRANSMITTER
A. Descriptions of Parts UHF - PLL EJ-880T 8 6 A 2 E 4 C 0 1. POWER Power on/off switch. 2. CH. / SEL Selectable switch. 3. AUDIO LEVEL Audio volume indicator 4. MIC / VOL. Wired mic. Volume control. 5. AUX / VOL. Aux. 6. EAR / VOL. Earphone output volume control. 7. Earphone output jack (3.5 o ) Input volume control. Earphone output jack (6.3 o ) DCIN 10 ~ 15 V MIC IN L PHANTOM UNBAL. RF POWER 5V R OFF / ON AUX / IN Low / Hi ANTENNA BAL. 1.
B. Setting - UP NOTICE : Prior to setting up, check that the transmitter and receiver are tuned to the same frequency. Two or above system operating in the same frquency can not be used at the same time and area, so please select the different frequencies which can be used simultaneously at local area. 1. Connecting the supplired antenn to the antenna TNC connector on the backi. 2. Check that the voltage of the suplired AC adapter conforms to the voltage available in local area.
(TX - Multi Rx) UHF - PLL EJ-880T 8 6 A 2 E 4 C 0 Attention: 1. Keep away from rain , water or the moisture places to avoid any damages caused. 2. Avoid and exteranl forces or impact. 3. Do not use it in high-temperature environment. 4. Do not connect with others different specific power supply. 5. Keep the wireless microphone away from sources of interference such as operating COMPUTERS , VCD , DVD...ect or communication equipment. 6.