User's Manual

ManualsBrandsOKAYO Electronics ManualsElectronicsWireless Handheld Microphone

Manual

Charging port

Up/Down button

Cap

Hi/Low/Mute

(sensitivity selector)

03/13

12/13

Channel select

1. Press and hold Setup button for 2 seconds; enter into

the channel select mode.

2. When channel numbers flashes, press Up/Down to

select preferred channel. To confirmed, press Setup

button.

Power OFF

Press power button 2 seconds to turn the device off.

Set up/ Installation

1. Press power button and hold 1 second to turn on.

2. When power is on, the poter indicator lits blue.

Power ON

Wireless Handheld Microphone

Synchronization

Notice: Th e changes or mo difications not expressly approved by th e party responsible for comp liance

could vo id th e us er ’s authority to op erate th e equipment .

IMP ORTANT NOT E: To comp ly wi th th e FC C RF exposure co mpliance requireme nts, no c hange to th e

ant enna or t he de vice is p ermitted. An y ch ange to th e an tenna or the device could

result in the device exceeding th e RF exposure re quirements an d void us er ’s

authority to op erate the de vice.

Consumer Al ert

Most us ers do no t need a license to op erate this wireless mi crophone system. Nevertheless, operating

this microphone sy stem wi thout a license is subject to ce rta in re strictions: The system may not ca use

harmful interfe rence; it mu st op erate at a low power level (not in exc ess of 5 0 milliwatts); and it has no

protection fr om interference received fr om any other device. Pu rchasers should al so be aw are th at th e

FCC is currently ev aluating us e of wi reless mi crophone systems, and th ese rules ar e subject to ch ange.

For more information, call th e FCC at 1– 888–CALL–FC C (TTY: 1–888–TELL–FCC) or v isit the FCC’s

wireless mi crophone Web site at ht tp://www.fcc.gov/cgb/wirelessmi crophones.

Specifications ar e subject to change without prior notice.

※

Mesh head

Handheld tube

Power indicator

Power ON/OFF button

(Channel / Freq. / battery energy)

Setup button

Battery door

Charging mode

1. LED lights red when charging.

2. LED lights green when battery is fully charged.

3. Battery error:

LCD battery symbol lights flashes, and it caused by:

(1)The battery charge temperature is exceeded 60 C.

(2)The duration of charging time for charger stand is

exceeded seven hours.

(3)The battery is defected.

LCD screen

3 4 5 6 7

LOW

MUTE

1. When turn on the device, it will synchronized automatically.

2. LED flashes blue and then steady when succeed.

3. Press short Setup button to resynchronization.

If failed, it will return to the original channel.

4. Synchronization range in 3 meters.