User's Manual

Table Of Contents

BX3.0 Bluetooth Receiver

User Manual

07/13

＋

CON1

(Power & AF OUT)

CON2

(LED)

CON3

(LED & Power S.W)

Connector

－

3 4

GND

N.C

+12V

S.W PW

CON1CON2CON3

Pin Assignment

Operation

6. When Bluetooth connection is out of range, it could be relinked automatically if users

get back to service range shortly. However, it depends on applied OS platform of the

smartphone. In some cases, you get to manually connect Bluetooth again.

5. During Bluetooth connection, it will stop audio playback when a call is made to your

smartphone . When the call is finished, Bluetooth will be relinked automatically and

audio files will be played.

4. When the pairing is done successfully, it will come out with a prompt tone again. The

indicators will light steady and the music will get from CON1 (AF).

3. When in pairing mode, activate Bluetooth connection on your smartphone or any

target device you want to do so. Find a device name of “okayo GPA” on pairing list and

get your smartphone connected.

1. Short the Power S.W (CON3, Pin3,4) to activate Bluetooth function.

2. A prompt tone will come out and the PWR indicator (CON3) / LINK indicator (CON2)

will flash as a sign of pairing in action.

PAGE 1
User Manual BX3.0 Bluetooth Receiver CON3 CON2 CON1 Pin Assignment Pin Connector CON1 (Power & AF OUT) 1 AF 2 3 4 5 6 GND AF GND N.C +12V CON2 (LED) ＋－ CON3 (LED & Power S.W) ＋－ PW S.W Operation 1. Short the Power S.W (CON3, Pin3,4) to activate Bluetooth function. 2. A prompt tone will come out and the PWR indicator (CON3) / LINK indicator (CON2) will flash as a sign of pairing in action. 3.
PAGE 2
User Manual BX3.0 Bluetooth Receiver FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limit s for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.