The manufacturer reserves the right to change and release product firmware updates and to keep this manual up to date. https://www.okai.
SP10 Smart Backpack Quick Start Guide & Terms of Warranty
Table of Contents 02 1.Introduction 03 1-1.Product Diagram 04 2.Packing List 05 3.Instructions 05 3-1.Bluetooth Pairing 05 3-2.Charging 06 3-3.Reset 06 3-4.UV Disinfection 07 3-5.Light Display Switch 07 3-6.Fingerprint Lock 08 4.Technical Specifications 09 5.Notes 09 6.OKAI Warranty Details 09 6-1.Terms of Warranty 09 6-2.Warranty Description 7.
1.Introduction Thank you for purchasing the OKAI Smart Backpack. Welcome to the OKAI Smart Backpack; this guide will show you how to properly use this product. This guide may be updated as we continue to refine our products. You can obtain the latest version of this guide and learn more about OKAI from our official website (www.okai.co).
1-1.
2.
3.Instructions This section provides information on how to use the product correctly. Following these instructions is critical to ensure user safety and service life. 3-1.Bluetooth Pairing Please connect the backpack to a power bank first, download the OKAI app and register an account, then search for nearby Bluetooth devices and pair the backpack. 1 2 3-2.
3-3.Reset You can replace the power bank with a new one after the backpack is powered off, and then activate the new one by pressing the reset button. Reset Button 3-4.UV Disinfection Open the disinfection section, put in any objects that need to be disinfected, close the magnetic cover, set the disinfection time via the app, and start the disinfection process. Disinfection will automatically stop when the time is up.
3-5.Light Display Switch The glow color and mode can be configured via the app when the backpack is connected. Glow APP Glow Operation Interface 3-6.Fingerprint Lock You can add a new fingerprint after the backpack is connected to the app and unlock the app via fingerprint.
4.Technical Specifications Item Contents SP10 External Dimensions (L × W × H) 33*17*45cm IPX4 Waterproof Rating Charging Port Recommended electrical specifications for connected power banks Storage Temperature Backpack Operating Temperature Charge Temperature >10000mAh -20℃~45℃ 0℃~40℃ 0℃~40℃ LQ-J3535UVC+UVA UV Light Model 6.5mW UVC Power 5050RGB(IC) Glow Model Single lamp bead power 0.
5.Notes ▪The backpack contains electronics and is only water-resistant for a short time; please do not cycle in the rain for a long time wearing the backpack. ▪Ensure the charging port remains clean and dry during the charging process.
▪The product was damaged by disassembly from a service store not authorized by OKAI. ▪The product was damaged by a force majeure event. ▪The product has experienced natural wear and tear in areas such as the exterior, keys, paint, and accessories. ▪The product has other failures, defects, or blemishes not attributable to OKAI. 7.Wearing the Helmet: Warnings and Instructions ▪If the backpack sustains a significant impact, stop using it or consider whether you should keep using it.
▪Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ▪Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation of the device.