URC Proprietary Ii 2. PROGRAMMING THE REMOTE CONTROL Programming of the remote control to control a particular device shall be accomplished by either of two methods: + Entering a three-digit device code * Using a search method ‘The remote control can operate up to eight separate audio and video devices. To program the remote control for your device, use the following steps: 2.1 REPROGRAMMED SET UP 2.1.1 Entering a Three-Digit Device Code 1. Turn on the device you wish to operate manually. 2.
URC Proprietary if 21.3 Programming a Second Device to Other Device Buttons This feature is used to program the remote control for two or more TVs, VCR, etc., or to program a device into a mode with a different Device Button name. You can store the three-digit Set-Up Code number for any device into any other Device button. Example: If your home entertainment system contains two TVs. First, using the TV Device button, program the remote via standard set-up to operate the first TV.
2241 5. URC Proprietary Ii Learning New Function on the Remote Place the URIC-100 and the original remote control to be learned from, on a flat surface, Line up the remote controls head to head, about 2 to 3 inches apart. Press and hold the [DEVICE] button (AUD, CD, DVD, AUX, SAT, TV, VCR or CBL) you wish to learn and [SEL] button simultaneously for about three seconds, until the LCD shows LEARN. The remote is now in the learning mode. Note: Each of the following steps must be completed within 20 seconds.
URC Proprietary Ii 2.2.2.3 Erasing All Buttons in All Device Modes 1. Press and hold the [TV] and [SHIFT] buttons simultaneously for ten seconds until the LCD will flash ERASE. The LCD will flash ERASE 10 times and then flash CLEAR. and then return to the TV Device Mode. Note: When the LCD on the remote returns to TV, all the learned functions in all eight devices mode have been erased. All the buttons in all device modes will now operate with the reprogrammed functions in their respective modes. 2.
URC Proprietary If 2. Press the corresponding DEVICE button {TV] and [MUTE] buttons simultaneously. The SET will appear in the LCD, SET appears in the LCD for 20 seconds to indicate that the remote control is ready to be programmed. The following steps must be entered while SET appears in the LCD. 3. Press the [SHIFT] button. PUNCH will appear in the LCD. 4. Press the [PLAY] button. PLAY will appear in the LCD. 5. Press the [DVD] device button to set-up for DVD Transport control. DVD will blink in the LCD.
URC Proprietary Il 1. Press the corresponding DEVICE button [AUD] and MUTE button simultaneously, The SET will appear in the LCD. SET appears in the LCD for 20 seconds to indicate that the remote control is ready to be programmed. The following steps must be entered while SET appears in the LCD. 2. Press the [POWER ON] button. M1-## will appear in the LCD. 3. Press the [AUDIO] device button and then press the [POWER ON] button (to tum on the AUDIO), M-01 will appear in the LCD. 4.
URC Proprietary #Y,2,9 HO #, &,0 Note: You can move the cursor left or right by using the [CURSOR LEFT] and [CURSOR RIGHT] buttons. You can also erase a current character by pressing the [CURSOR DOWN] button. 3. Press the {ENTER} button to save the display you changed. SAVE will blink two times in the LCD. 2.6 BACK LIGHT All the buttons and the LCD on the cremate are back light for 10 seconds when the LIGHT button is pressed.