Order Number : GETEC-C1-12-376 FCC Part 15 subpart C Test Report Number : GETEC-E3-12-136 Page 1 / 1 APPENDIX H : USER’S MANUAL EUT Type: RF REMOTE CONTROLLER FCC ID.
Operating Your System With The MX-900i
This remote control was Custom Programmed for you by: For questions about your Custom Programming call: Custom Programming of a complex home theater and/or a multi-room system is one of the most challenging tasks within an audio/video installation. It involves an intimate knowledge of how the components interact and exact details on the proper sequences of control.
TABLE OF CONTENTS Congratulations! 1 Custom Labeled Buttons 1 Optional RF “No Rules” Operation 2 Installing Batteries 3 Programming the MX-900i 4 Selecting a New “Activity” 5 Using the MX-900i to Control an “Activity” 6 Displaying the Setup Screen 7 Selecting from the Setup Screen 7 Setting the LCD 8 Light Settings 10 Sound Volume 10 System Settings 11 Version Information Displays 11 USA Limited Warranty Statement 12 Specifications 13 Federal Communication Commission Interfer
MX-900i OWNERS MANUAL Congratulations! You’ve purchased a unique synthesis of hardware and software engineering, the Complete Control MX-900i. The MX-900i achieves a magnificent combination of power and flexibility, simplifying and automating operation of even the most complex system. One Touch Blue Backlighting Simply press the LIGHT button to backlight the screen. Integrated Sound Signaling The MX-900i incorporates a small speaker for beeps.
MX-900i OWNERS MANUAL Optional RF “No Rules” Operation In combination with a Complete Control RF Base Station, the MX-900i can control your system without being in line-of-sight of the equipment. Either the MRF-350i or the RFX-250i RF base station is compatible with the MX-900i. Both incorporate RF addressing. RF Addressing gives you the ability to control equipment locations throughout your home, even if they are concealed in other rooms or are behind closed doors. 1.
MX-900i OWNERS MANUAL Installing Batteries Open the battery cover by pressing the release and pulling back the cover on the back of the control. Remove the cover. Observe the + and - polarity indications inside the battery compartment. + - Place the four AAA batteries into their positions in the battery compartment observing the + and polarity indicators on the batteries. Now, replace the battery cover by inserting the hinged end in first, then snapping the cover back into place.
MX-900i OWNERS MANUAL Programming the MX-900i The MX-900i is programmed via a Windows PC equipped with a USB port (programming cable included), using our proprietary software, MX-900i Editor. You can download this software from our website: www.universalremote.com Basic setup takes only a few minutes with this software. However, to fully automate an audio/video system the user must have a detailed knowledge of each component, you the user (and your preferences) and how the system is connected and operated.
MX-900i OWNERS MANUAL Selecting a New “Activity” The MX-900i’s WATCH and LISTEN buttons display the activities you can control with your MX-900i. When you want to watch something else (a DVD movie, a videotape or an HDTV broadcast), simply press the WATCH button and select the new activity. When you want to listen to the radio or to a CD, touch the LISTEN button and select what you would like to listen to.
MX-900i OWNERS MANUAL Using the MX-900i to Control an “Activity” Once you’ve selected a new activity, the MX-900i displays the title of the activity at the top of the screen. Below the title, the LCD displays the customized names of any special features you need for the activity. All the hard buttons of the MX-900i have now changed to functions optimized for this activity. The Title displays what activity you can control. The LCD button labels describe special features for this activity.
MX-900i OWNERS MANUAL Displaying the Setup Screen You can adjust the settings of the MX-900i whenever you like by pressing and holding both the WATCH and the ENTER button at the same time for three seconds. When you do, the screen will change to the SETUP screen. If you do not press any button on the SETUP screen within 30 seconds, the MX-900i will time out and automatically return to normal operation. You can return to normal operation before that by pressing either the WATCH or the LISTEN button.
MX-900i OWNERS MANUAL Setting the LCD With these settings, you can set the MX-900i to constantly display the LCD when not in use, or show a blank screen when not in use. Additionally, you can control the contrast of the screen. To activate the LCD On/Off setting, press this button. See below. To activate the CONTRAST setting, press this button. See the next page. To activate the BRIGHTNESS setting, press this button. See the next page. To exit without saving any changes you have made, press EXIT.
MX-900i OWNERS MANUAL Setting LCD Contrast You can adjust the contrast of the LCD screen using the LEFT and RIGHT arrow keys once the LCD contrast screen has been selected (shown on the previous page). The current CONTRAST is displayed here via a bar graph. To SAVE any changes you have made, press SAVE. To exit without saving any changes you have made, press EXIT. Adjust the CONTRAST setting with the LEFT and RIGHT keys as shown in the previous pages.
MX-900i OWNERS MANUAL Light Settings You can adjust the backlighting of the remote in two additional ways: 1. You can turn on/off the LCD and the hard button backlighting. 2. You can select the amount of time the lighting stays on after the last button press from a range of values between 10 seconds and 90 seconds. Change whether the backlighting is on or off by pressing this button. If you want the backlighting always OFF, set it to OFF. If you would like the backlighting on, select ON.
MX-900i OWNERS MANUAL System Settings You can set your MX-900i to display the Low Battery warning at a power level between 0% and 20% (in 5% increments). The Power bar indicates available power with Black. Press here to adjust the battery warning level. The Memory bar indicates available memory with Black. The memory in use is White. To exit, press WATCH. Version Information Displays Should you be curious, the Version indicates what firmware and software versions were used to program your MX-900i.
MX-900i OWNERS MANUAL USA Limited Warranty Statement Your Universal Remote Control, when delivered to you in new condition, is warranted against defects in materials or workmanship as follows: UNIVERSAL REMOTE CONTROL, INC. warrants this product against defects in material or workmanship for a period of one (1) year and as set forth below.
MX-900i OWNERS MANUAL LIMITATION OF REMEDIES UNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT.
MX-900i OWNERS MANUAL Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
MX-900i OWNERS MANUAL Declaration of Conformity Company Name : OH SUNG ELECTRONICS CO., LTD.
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.