Order Number : GETEC-C1-21-301 FCC Part 15 subpart C Test Report Number : GETEC-E3-21-018 Page 1 / 1 APPENDIX H : USER’S MANUAL EUT Type: Remote Controller FCC ID.
B905-FTN-TA MANUAL 1 - Mechanical Requirements 1.1 - Design - Dimensions : 170.2 x 43.4 x 17.8mm BOTTOM CASE BATTERY COVER MATERIAL XG 569C MATERIAL COLOR BLACK MATERIAL SILICONE MATERIAL COLOR BLACK PRINT COLOR WHITE SURFACE TREATMENT SILICONE COATING RUBBER BUTTON Address : #181 GONG DAN-DONG, GUMI, GYEONG BUK, KOREA TEL : 82-54-468-7063 / FAX : 82-54-461-8368 http://www.ohsungec.
B905-FTN-TA MANUAL 1.2 - Picture (for reference only) Address : #181 GONG DAN-DONG, GUMI, GYEONG BUK, KOREA TEL : 82-54-468-7063 / FAX : 82-54-461-8368 http://www.ohsungec.
B905-FTN-TA MANUAL 1.3 - Batch Number Adhesive label is attached at the inside part of the battery cover 1.4 - Slip - Slip length changd to 35mm 1.5 - Packing 1.5.1 - Packing Process - PE bag dimensions : 83 x 286 mm (LDPE 0.05t) - Quantity Per Box: 140pcs Address : #181 GONG DAN-DONG, GUMI, GYEONG BUK, KOREA TEL : 82-54-468-7063 / FAX : 82-54-461-8368 http://www.ohsungec.
B905-FTN-TA MANUAL - Box dimensions : W 600 x D 400 x H 240 mm 1.2.2 - Pallet definition - Pallet dimension : W 1200 x D 800 x H 170 mm - Full pallet dimension : W 1200 x D 800 x H 1850 mm - Quantity per pallet : 3,920pcs (4 boxes / layer - 7 layers) Address : #181 GONG DAN-DONG, GUMI, GYEONG BUK, KOREA TEL : 82-54-468-7063 / FAX : 82-54-461-8368 http://www.ohsungec.
B905-FTN-TA MANUAL 2 - Electrical Requirements 2.1 - Electrical Characteristic Parameter Condition Spec Unit Frequency Range Bluetooth 2.402 ~ 2.480 [GHz] Channel Low Energy 40 [Num] RF Power Specification 8 [dBm] 19 [Num] PAvg -20~+10 [dBm] PMax +8 [dBm] Pmin -20 [dBm] ∆f1 avg 225~275 [KHz] [KHz] Test channel RF Power Modulation Characteristics ∆f2 avg TC-3000 ≥ 185 ∆f2/∆f1 (RF measuring instrument) 0.8 ∆f2min ≥ 92.
B905-FTN-TA MANUAL 3 - Software Requirements 3.1 – Bluetooth 5.0 LE identification a) Device Name: FUNCTION101 RC b) Vendor ID: 0x0957 c) Product ID: 0x1000 3.2 – Pairing mode a) Before RCU paired or after Factory Reset, RCU works in IR. b) Press [OK] + [MUTE] keys for longer than 4 seconds. c) After 4 seconds, the LED turns ON so that to confirm the remote has entered into pairing mode. d) After RCU has entered pairing mode, RCU can send the IR signal.
B905-FTN-TA MANUAL a) STB ------------------- #0001 (Only Apple TV) b) TV & Soundbar ------------------- #0505 (TV) 3.6 – TV & Soundbar Key a) TV & Soundbar Key: Power, Vol+, Vol-, Mute b) This key acts as the key of the last configured device. 3.7 – Number Call a) Press the [MENU] + [OK] key for more than 3 seconds to enter the set-up mode. Then the LED will turn on. b) If any key press is not followed for next 20 seconds, LED will be switched OFF and get out of set-up mode automatically.
B905-FTN-TA MANUAL b) If any key press is not followed for next 20 seconds, LED will be switched OFF and get out of set-up mode automatically. c) If an user presses [P+] key, the remote control will send [VOL+] code of next TV code on every [P+] key press. d) If an user presses and holds [P+] key, the remote control will send [VOL+] code of next TV code every 2 seconds. e) If the end of the DB is reached, the LED will blink 3 times.
B905-FTN-TA MANUAL 3.9 – Soundbar Set-up 3.9.1 - 10 Brands Auto Search - Auto search method for 17 brands. The following Brands Auto Search shall be supported: Number Brand Number Brand Number Brand Number Brand 1 Logitech 6 Bose 11 Vizio 16 Nakamichi 2 Samsung 7 JBL 12 Pioneer 17 Polk Audio 3 LG 8 Harmann Kardon 13 Denon 4 Sony 9 Arcam 14 Onkyo 5 Philips 10 Jamo 15 Yamaha a) Press the [MENU] + [OK] key for more than 3 seconds to enter the set-up mode.
B905-FTN-TA MANUAL c) If an user presses [DOWN] key, the remote control will send [VOL+] code of the next Soundbar code set on every [DOWN] key press. d) If an user presses and holds [DOWN] key, the remote control will send [VOL+] code of the next Soundbar code set every 2 seconds. e) If the end of the DB is reached, the LED will blink 3 times. If the [DOWN] key is pressed and held, the remote control will repeat [VOL+] commands another cycle.
B905-FTN-TA MANUAL - Bit Configuration - The following figure shows the 32 data bits in the NEC format and how they are partitioned in the Apple IR protocol. Each 16-bit data word is transmitted fully before the next word begins. Within each word, the least significant bit (LSB) is transmitted first. d) Repeater Packet e) Frame Interval Address : #181 GONG DAN-DONG, GUMI, GYEONG BUK, KOREA TEL : 82-54-468-7063 / FAX : 82-54-461-8368 http://www.ohsungec.
B905-FTN-TA MANUAL 3.
B905-FTN-TA MANUAL Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
B905-FTN-TA MANUAL 6.1 – Appendix 1: Batteries specifications See the next page. 6.2 – Appendix 2: Brand List Importer : Address : #181 GONG DAN-DONG, GUMI, GYEONG BUK, KOREA TEL : 82-54-468-7063 / FAX : 82-54-461-8368 http://www.ohsungec.
B905-FTN-TA MANUAL Appendix 1 : Batteries specifications Address : #181 GONG DAN-DONG, GUMI, GYEONG BUK, KOREA TEL : 82-54-468-7063 / FAX : 82-54-461-8368 http://www.ohsungec.
B905-FTN-TA MANUAL Address : #181 GONG DAN-DONG, GUMI, GYEONG BUK, KOREA TEL : 82-54-468-7063 / FAX : 82-54-461-8368 http://www.ohsungec.
B905-FTN-TA MANUAL Address : #181 GONG DAN-DONG, GUMI, GYEONG BUK, KOREA TEL : 82-54-468-7063 / FAX : 82-54-461-8368 http://www.ohsungec.