3048SD-ATV READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT 6004252 - REV A 08/18
Safety Rules This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Read and understand all safety rules and operating instructions before using this ATV/UTV attachment. Follow all safety rules and operating instructions provided by your vehicle's manufacturer when using attachment. Never allow children or untrained persons to operate vehicle or attachment.
Carton Contents 2 (x1) 5 (x1) 1 (x1) 3 (x1) 8 (x1) 9 (x1) 4 (x1) 10 (x2) 7 (x2) 14 (x1) 6 (x2) 17 (x2) 13 (x4) 18 (x4) 16 (x2) 11 (x8) 12 (x14) 19 (x2) 20 (x2) TOOLS REQUIRED FOR ASSEMBLY: • • • 9/16" Wrench and Socket 2 Needle-Nose Pliers Grease Gun 15 (x2)
1 Assembly Instructions Attach undercarriage to body securely with hardware as shown. 12 2 11 1 2 Attach front support to body securely with hardware as shown. 12 3 4 13 3 Align holes in swivel clevis and undercarriage and install pin as shown. Secure pin on both ends with hairpins.
Assembly Instructions 4 Press down on drawbar until it locks into place. 5 Insert stub axles into undercarriage and secure with pins as shown. 17 6 16 6 Slide washers and wheels onto stub axles as shown and install cotter pins. Bend legs of cotter pin to secure.
7 Assembly Instructions Attach tailgate to body as shown. No hardware is required, tailgate should move freely up or down. 8 8 Attach ball hitch to drawbar with spacers and hardware as shown.
Operating Instructions Before Using Dump Cart: 1. Apply lithium grease to wheels using grease gun until grease can be seen squeezing out from both sides of the wheel. 2. Check tire pressure and inflate to 24 psi if needed. 3. Read all Safety Rules found on page 1. How to Use Dump Cart: 1. Attach Dump Cart to your ATV or UTV. 2. Do not exceed 1200 pounds when loading material into the cart body. 3. Distribute the weight of the load as evenly as possible in the cart body for best handling. 4.
Warranty If this product fails due to a defect in material or workmanship within THREE YEARS from the date of purchase, we will at our option repair or replace it free of charge. This warranty excludes tires and wheels, which are expendable and become worn during normal use. This warranty does not cover: • Repairs necessary because of operator abuse or negligence. • Equipment used for commercial or rental purposes. • Paint that is worn or faded due to normal use or exposure.
EXPLODED VIEW 13 4 8 1 34 3 12 11 12 2 16 18 7 35 21 30 12 10 24 23 9 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 PART NO 6004239 6004241 6000311 6004245 6004243 6000523 6000727 401041 308301 6004202 6001285 310061 6004259 6000371 6000372 3000811 3000812 300076 300087 20 27 28 32 17 6 15 31 26 25 24 REPLACEMENT PARTS ORDERING 37 14 29 33 22 23 DESCRIPTION BODY, WELDED 3048 UNDERCARRIAGE FRONT SUPPORT ADAPTER PLATE DRAWBAR ASSEMBLY (incl.
KIT KIT NUMBER HARDWARE 6004251 BOLT BAG 1" WHEEL BEARING KIT 6000818 DRAWBAR ASSEMBLY 6004243 REPAIR KITS PART NUMBER 6004259 6004202 6001285 310061 6000371 6000372 3000811 3000812 300076 300087 6004260 6000814 6000816 300055 300061 300075 3000720 6000305 6000309 6000321 6000324 6000325 6000368 6000369 6000370 6004244 PART DESCRIPTION CARRIAGE BOLT, 3/8-16 X 1" SPACER, BALL HITCH HEX BOLT 3/8"-16 X 2-1/2" HEX NUT, 3/8-16 NYLOC PIN, 1/2" X 2-13/32" HAIRPIN COTTER, 0.
Notes 10
Designed And Tested In Columbus, Ohio Manufactured In The U.S.A. From Domestic And Imported Components MODEL # 3048SD-ATV 2575 Ferris Road Columbus, OH 43224 (800) 652-2321 www.OHIOSTEEL.