FN-LINK TECHNOLOGY LIMITED 湖南欧智通科技有限公司 地址:湖南省浏阳经济技术开发区利通路8号 电话: +86-755-2955-8186 Website: www.fn-link.com Product specification IEEE 802.11 a/b/g/n/ac 1T/1R USB模组 product name FN-8811AU WIFI Module Model name F11AUUM13-W4 editor: Neal Yu audit: XJ Hu Approved by the: William Tan 客户承认信息 规格书内容确认可接受. 客户 http://www.fn-link.
FN-LINK TECHNOLOGY LIMITED directory 0 Update record.............................................................................................................................................................. 3 1 introduce.......................................................................................................................................................................4 1.1 overview......................................................................................................
FN-LINK TECHNOLOGY LIMITED 0. 更新记录 版本 日期 Rev0.1 Dec.19.2014 初版释放 Neal Yu Rev0.2 Mar.09.2015 更新外形图何包装信息 Neal Yu Rev0.3 Mar.21.2015 更新5G输出功率 Neal Yu Rev0.4 Apr.19.2018 修改外形图 http://www.fn-link.
FN-LINK TECHNOLOGY LIMITED 1. introduce This note briefly describes the features of the F11AUUM13 module.Based on ruiyu RTL8811AU chip development of a support of 802.11a/b/g/n/ac, 2.4g +5G 1T1R, USB interface, wireless module.Perfect to meet the user's wireless experience. 1.1 overview The module block diagram is as follows Figure 1. 1.2 特性 2. 3. 4. 5. 6. 7. Support IEEE802.11a/b/g/n/ac standard.. The highest transmission rate supports the theory of 433Mbps Operating at 2.4~2.
FN-LINK TECHNOLOGY LIMITED 2. main specifications 2.1 WiFispecifications features describe The main chip Realtek RTL8811AU Working frequency 2.4G: 2.4000GHz～2.4835GHz, 5G: 5180MHz-5240MHz.5745MHz-5825MHz Working interface USB 2.0 Wi-fi standard IEEE802.11a/b/g/n/ac 802.11b: Modulation method DBPSK/DQPSK/CCK (DSSS) 802.11 a/g/n/ac: BPSK/QPSK/16QAM/64QAM/256QAM(OFDM) rate output power Receiving sensitivity http://www.fn-link.com 802.11a: 6,9,12,18,24,36,48,54Mbps 802.11b: 11,5.
5GHz Band/HT20 ● -82dBm at MCS0 ● -79dBm at MCS1 ● -77dBm at MCS2 ● -74dBm at MCS3 ● -70dBm at MCS4 ● -66dBm at MCS5 ● -65dBm at MCS6 ● -64dBm at MCS7 802.11a@10% PER 6Mbps ≤-82±1dBm 9Mbps ≤-81±1dBm 12Mbps ≤-79±1dBm 18Mbps ≤-77±1dBm 24Mbps ≤-74±1dBm 36Mbps ≤-70±1dBm 48Mbps ≤-66±1dBm 54Mbps ≤-65±1dBm 802.
3.0 dimensions FN-LINK TECHNOLOGY LIMITED 3.1 (单位: mm) http://www.fn-link.
FN-LINK TECHNOLOGY LIMITED 3.2 Pin definition 3.3 Application circuit http://www.fn-link.
FN-LINK TECHNOLOGY LIMITED 4. Environmental features 4.1 Working storage condition 4.2 Recommended temperature curve Referred to IPC/JEDEC standard. Peak Temperature : <250°C Number of Times : ≤2 times 4.3 : WIFI module installed note: 1. Please press 1 : 1 and then expand outward proportion to 0.7 mm, 0.12 mm thickness When open a stencil 2. Take and use the WIFI module, please insure the electrostatic protective measures. 3.
FN-LINK TECHNOLOGY LIMITED environment conditions: temperature in: < 40 ℃, relative humidity: < 90% r.h. 2. The module vacuum packing once opened, time limit of the assembly: 1) check the humidity display value should be less than 30% (in blue), such as: 30% ~ 40% (pink), or greater than 40% (red) the module have been moisture absorption. 2) factory environmental temperature humidity control: ≦ 30% ℃, ≦ 60% r.h.. 3) Once opened, the workshop the preservation of life for 168 hours. 3.
FCC Statement FCC standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247,15.407 Integral antenna with antenna gain 2.0dBi This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
