User's Manual

【Quick Installation Guide─Infant Temperature Monitor v1.0】
1 07-2017 / v1.0
 Friendly Reminders:
1. Please ensure the following contents are included:
★ Infant Temperature Sensor x1 ★ Liquid Crystal Display Receiver x1
★ Power Adapter Sets x2 ★ Infant Temperature Detection User’s Manual x1
2. Before use, please connect the power adapters to both the sensor and the receiver.
3. When monitoring temperature, please keep the sensor pointed directly at the infant’s forehead and
between 10~40cm away from the forehead.
4. Please refer to the Full Diagram (Pic.1), and secure the Infant Temperature Sensor between 10~40
cm away from the forehead. (This is the standardized effective distance)
▲Full Diagram (Pic.1)
 Instructions
1. Exterior Diagram
1.1 Infant Temperature Sensor
(Pic.2) (Pic.3)
1.2 Liquid Crystal Display Receiver
(Pic.4)
1.2.1 Liquid Crystal Display Receiver – Icons’ Description
(Pic.5)
1 2 3 4
5
9 10
6 7 8
(Table.1)
1. Start/Run
2. Options
3. Pairing
4. Sound Level
5. Status Alert
/Alarm
6. Body
Temperature
7. High/Low
Threshold
8.
Temperature
Value
9. Celsius(℃)
Fahrenheit(℉)
10. Ambient
Temperature
Pairing Button
Red LED Indicator
Thermal Image
Receiver
Left Button: ⊝ Menu Selection
Up Button: ⦿ Power Button/Return to main menu
Right Button: ⊕ Options/Confirm (Next) Key
Down Button:
○
M Pairing Button