Quick Guide

Oclean W1 Quick Guide

■Nozzle

It can be 360 degrees rotation. When replacing nozzle, pull it out vertically.

When inserting it, insert it to bottom until it is close to the device body.

■Mode switch button

Short press the button can switch the different mode.

■Mode indicator light

Light 1 : Standard mode

Light 2 : Sensitive mode

Light 3 : Massage mode

■Water tank

Pull down the water tank with a little force. It can irrigate about 120 times when it has full water.

■On-Off button/charging indicator light

Holding the ON/OFF button to irrigate. Release button to stop irrigate.

The charging indicator light is in a breathing flashing state when charging, the charging light is on

constantly when fully charged.

The power light flashed in red when battery is low.

■Charging port

Charge with the magnetic charging cable. It can be fully charged in 3 hours.

PAGE 1
Oclean W1 Quick Guide ■Nozzle It can be 360 degrees rotation. When replacing nozzle, pull it out vertically. When inserting it, insert it to bottom until it is close to the device body. ■Mode switch button Short press the button can switch the different mode. ■Mode indicator light Light 1 : Standard mode Light 2 : Sensitive mode Light 3 : Massage mode ■Water tank Pull down the water tank with a little force. It can irrigate about 120 times when it has full water.
PAGE 2
Using Steps 1. Make sure there is power in the device, it needs to charge firstly if no power. 2. Refill the water tank, insert the nozzle into the device body，Put the nozzle intermittently close to the slit between teeth (The distance between nozzle and slit is about 2CM) ,Press and hold the power button to start cleaning. Slowly move to the next zone. 3. Release the spray button after cleaning.