User Manual Ochsner Stove Sensor 1.0 Version: 1.0 Date: 24-08-2021 Ochsner Clinic Foundation 1514 Jefferson Hwy., New Orleans, Lousiana 70121, United States https://www.ochsner.org/ Phone: +1-504-228-0749 Confidentiality Notice Copyright ©2020 Ochsner Clinic Foundation – All rights reserved. This document is authored by Ochsner Clinic Foundation and is Ochsner’s intellectual property, including the copyrights in all countries in the world.
OCHSNER STOVE SENSOR 1.0 TABLE OF CONTENTS 1 USING THIS MANUAL .................................................................................................................................... 6 1.1 1.2 2 PURPOSE AND AUDIENCE ....................................................................................................................................6 REFERENCES ......................................................................................................................................
OCHSNER STOVE SENSOR 1.0 LIST OF FIGURES FIGURE 1 : STOVE SENSOR DEVICE ......................................................................................................................................... 7 FIGURE 2 : STOVE SENSOR SYSTEM BLOCK DIAGRAM ................................................................................................................ 7 FIGURE 3 : STOVE SENSOR DESIGN LABEL .......................................................................................................
OCHSNER STOVE SENSOR 1.0 LIST OF TABLES TABLE 1 : REVISION HISTORY................................................................................................................................................ 5 TABLE 2 : REFERENCES.........................................................................................................................................................
OCHSNER STOVE SENSOR 1.0 COPYRIGHT INFORMATION The information contained in this document is the proprietary information of Ochsner Clinic Foundation. The contents are confidential and any disclosure to persons other than the officers, employees, agents or subcontractors of the owner or licensee of this document, without the prior written consent of Ochsner Clinic Foundation, is strictly prohibited.
OCHSNER STOVE SENSOR 1.0 1 1.1 USING THIS MANUAL Purpose and Audience This document provides Introduction, key features, design platform Architecture and interfaces, setup and use of Ochsner Stove Sensor 1.0. It is intended for the users who are configuring this product. The user need to use this product in order to monitor the ‘ON-OFF’ state of stove through one’s gadgets(Mobile). It basically alerts the owner if the stove is turned ON/OFF or left ON by any of the family members of the user.
OCHSNER STOVE SENSOR 1.0 2 PRODUCT OVERVIEW Stove Sensor is a battery operated standalone device used to monitor the ‘ON-OFF’ state of the stove. It automatically detect the state of stove and sends the status to the Gateway(Master Device) using Z-Wave radio connectivity. The product supports two 3V CR123A Li-MgO2 batteries with capacity of 1550mAh each which leads to more than 1 year battery life. Notes: Gateway(Master Device) details are not included in this document. Figure 1: Stove Sensor Device 2.
OCHSNER STOVE SENSOR 1.0 2.2 Product Features and Functionality The table below lists major features and function of the Ochsner Stove Sensor 1.0. Sr No Feature Parameter 1 Stove Sensor Device Box Content 2 Batteries CR123A Panasonic Industrial(3V, 1550mAH) 3 Radio Connectivity Z-Wave(916MHz, 908.4MHz, 908.
OCHSNER STOVE SENSOR 1.0 2.4 Stove Sensor Device Configuration Steps. Stove Sensor needs to be included (paired) with the Gateway before the installation of the device. Below are the steps to be followed for the pairing process: Insert the two CR123A batteries inside the device by opening the front panel of the device. Figure 4: Front Panel Opening Figure 5: Battery Insertion After the insertion of batteries close the front panel.
OCHSNER STOVE SENSOR 1.0 User LED(Green) will start blinking after the single press of user button which indicate the stove sensor device is under inclusion process(Pairing Process). Figure 7: Green LED 2.5 Stove Sensor Device Installation Steps. Stove Sensor Device needs to be installed over the back wall of stove for better monitoring of stove. Below are the steps for installation. Apply the 3M tape on the back cover of the Stove Sensor enclosure.
OCHSNER STOVE SENSOR 1.0 3 CONTACT US AND SUPPORT USA Office: Ochsner Clinic Foundation Address: 1514 Jefferson Hwy. New Orleans, Lousiana 70121, United States Email: matthew.hales@ochsner.org Ochsner Clinic Foundation offers many resources to support our customers and Stove Sensor Device platform at Website: https://www.ochsner.org/ For instance, you can ask a question and other technical details related to reference design platforms at our website.
OCHSNER STOVE SENSOR 1.0 4 4.1 APPENDIX-A FCC and IC Compliance Design Name Model: Ochsner Stove Sensor 1.0 Conforms to the following standards or other normative documents: FCC: FCC part 15 modular certification ID: 2A2QP-OCHSTOVE IC: Industry Canada RSS-247 modular certification IC: 27684-OCHSTOVE Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment.
