User Guide

Power up the radio and follow the steps on the screen to Add AP (AP is
the access point, your wifi network), it will start scanning the network
available and display a list after scanning is done. Choose your network
from the list. If your network is enabled with security protection, you will be
asked to enter the password to connect with your network.
Follow the steps below to enter the password on your radio:
Operating on the radio unit
1. Rotate the <Tune/Select> knob to browse the characters available,
press the <Forward> key to enter and move to the next entry.
2. After the entries are done, press the <Tune/Select> knob to confirm.
3. It will start associating with your network. If it is successful, it will
show "Association Complete".
Quick Start Guide
Connecting to your Wifi network
Tune / Select
Using remote control
1. Use the alpha-numeric keypad on the remote control, press the
button repeatedly to cycle through the characters available.
2. Press the ► key to enter and move to the next entry.
3. When the entries are done, press <OK> to confirm and it will start
associating with your network.
Tune / Select
Enter Passphrase
D
aA . . . d D e . . . zZ 1/2
to delete to next Select when dto choose
Press to confirm
Back Forward
Tune / Select
Menu