User Manual Internet Radio WR-60 Please read this user manual carefully before using the receiver.
Location of Controls 1. Speaker 2. ON/OFF 3. Mode 4. Preset 5. 2.4” TFT color display 6. Menu 7. Left 8. Remote sensor 9. Right 10. Dial/Select/Volume 11. Wire FM antenna 12. DC jack 13. Earphone jack 14.
Remoter controller 1. : Standby button 2. : Mute 3. 0-9: Favorite station key / input letters and numbers for WiFi Encryption code 4. : Dim the display 5. : Favorite button, adding station to your favorite list 6. : Cursor up 7. : Cursor down 8. : Cursor left / back to previous menu 9. : Cursor right 10. OK: confirm button 11. : Alarm button 12. : Sleep Timer 13. : Volume up 14. : Volume down 15. : Main Menu 16. Mode: Switch between Internet radio, Media Center (UPnP) 17. EQ: Equalizer 18.
Switching on the radio Plug the connector plug of the mains adaptor into the DC jack on the unit. Connect the other end of the adaptor to the wall socket. Caution: Use only the main adaptor supplied with the radio. Connecting a power supply with a different rating will cause permanent damage to the radio and may be hazardous. The display on the front of the radio will light up and show: Welcome Then you can select your prefer language on the radio.
Please refer to the “Remote control character list” for you to enter the passwords. Press the “ ” button to go to the next word, press “ ” button to delete the wrong word you have entered. If you want to enter the passwords on the radio main unit, you can use the Volume Dial rotary knob. Follow the steps below: - Rotate the knob to select the character - Press the button to go to the next entry - After you finish the entries, push down the Rotary knob to confirm.
To recall a preset station: Press the button briefly and choose your desire station. Remark: Please note Preset 1-5 is reserved for future use and cannot be preset for radio stations. Radio Station / Music Select this option, then you can select your desired radio station by Category, Genere or Location. Local Radio If you want to access quickly the radio station located in your area, select this function and it will display the list of the stations available in your area.
Manual Tune If you want to tune up the radio station manually, please use the DIAL/SELECT button to tune up and down of the frequency. The frequency will go up/ down by each step of 0.05MHz. Press ‘ ’ buttons on the remote controller to perform the manual tune. FM Station Presets To preset a station, press and hold the “PRESET“ button on the unit, or the “ ” button on the remote controller. It can store up to 20 Preset station.
to complete its scan and before the scan has completed, the radio will display ‘[Empty]’. The radio will continue to display ‘[Empty]’ if no UPnP servers and found. c. After a successful scan. Select your UPnP server, by rotating the dial if there is more than one UPnP server, and then press SELECT (note, your radio will display’ Access Denied’ at this stage) 4. Your PC will now prompt you that a device has attempted to connect to your UPnP server.
previous/next day weather forecast. Remark: The weather is just for reference only. It may have deviation to the actual weather. Financial Information You can get the information of Stock Market all over the world System Information You can view the information of the radio such as the Version of the software / Wlan Mac / IP address..etc. Configuration Manage my mediaU You can tailor made your own favourite station list using your computer. Firstly you need to enable “Manage my MediaU” on your radio.
Manual Configuration You can set the DHCP on or off, and enter the SSID as you known, or delete the connected WiFi. Check network when power on This is set to enable or disable “Check network when power on”. Date & Time Currently Date & Time setting You can press“ ” “ ”buttons for parameter setting, and move cursor with“ ” “ ”buttons and press ‘Enter’ to confirm.
180 minutes with the step of every 15 minute. You also can do the setting with the “Sleep” button from remote control, when you press “Sleep”, then you can see the sleep timer on the top right corner of the display. Buffer You can select your preferred buffering time. Weather You can set the display of weather forecast on the standby mode and the temperature units. -You can select Weather Display On/Off and Location.
- connect to the Wi-Fi network, and the Internet Radio display will show Bad ESSID or key. To overcome this problem you will need to add the Internet Radio’s MAC address to the list of allowed equipment in your access point. The Internet Radio’s MAC address can be found using the menu System Information -> Wireless Info MAC address>. You will need to refer to the guide for you Access Point in order to enter the Internet Radio as an allowed piece of equipment.
Playlists: Some media ripping applications allow ‘Playlists’ to be created. The Internet Radio is able to detect and stream these playlists, but they must be stored in the folder with the rest of the Media content and they must have the file extension.m3u. Windows Media player can create suitable playlist, just select ‘create new playlist’, drag and drop the tracks you want into the playlist, then use ‘Save as’ to ensure the file type is .m3u.
WEEE and Recycling The European laws do not allow any more the disposal of old or defective electric or electronic devices with the household waste. Return your product to a municipal collection point for recycling to dispose of it. This system is financed by the industry and ensures environmentally responsible disposal and the recycling of valuable raw materials. FCC Statement: This device complies with part 15 of the FCC Rules.
