User Manual Internet Radio WR-230 Please read this user manual carefully before using the receiver.
Welcome Table of contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Enter encryption code of the Wi-Fi router . . . . . . . . . . . . . . . 4 Connect the radio with your Wi-Fi Router . . . . . . . . . . . . . . 6 Start using internet radio . . . . . . . . . . . . . . . . .
Location of Controls 1. Remote sensor Front 1 2. LCD display - On Standby mode, rotate the Tune/Select knob to adjust the brightness level or using the up/down key on remote control 2 3. Speaker 4. Back - Back to previous menu DIAL / SELECT PRESET BACK 5. Menu - Press to enter main menu MENU 3 Top 4 8 9 5 6 6. Preset - Long press to add station to favourite; - Short press to recall list of favorite stations 7 7.
Remote Control 1. : Mute 1 2. 0-9: Favorite station key / input letters and numbers for WiFi Encryption code 3. : Preset the current playing station to Favorite 12 2 4. ▲: Cursor up 5. : Cursor left / back to previous menu 6. : Alarm button 7. : Sleep Timer 3 8. Mode: Switch between Internet radio/UPnP/Aux-in 9. 10. 4 14 : Main Menu 5 : Previous station on the list/previous track on UPnP : Standby button 13. : Recall the favorite list 15 16 11.
Enter encryption code of the Wi-Fi router Using remote control When you want to enter letters, numbers or symbols for the encryption code, using remote control would be easy to complete the job. Here is the definition of each key and toggle the same numeric key to cycling through different letters / symbol available. After each entry, press the right key to input the next. When it is done, press to confirm. Key 1: 1 and different kind of symbols !@#$%^&*()_+[]{};:'”\|,.
Before you start Please ensure the following is ready: • You have a broadband internet connection. • A wireless (Wi-Fi) broadband router (2.4GHz) is connected to the internet successfully. The radio supports Wireless B, G and N connection (Wireless N router can also be used with the setting on B or G). • You know the Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data encryption code/password.
Connect the radio with your Wi-Fi Router 1. Use the AC adaptor supplied with the product, one end to the DC socket located at the rear side of the radio and the other end to the wall socket outlet. Caution: Use only the adaptor supplied with the radio. Connecting a power supply with a different rating will cause permanent damage to the radio and may be hazardous. 2. The radio will power on and display as follow. Choose to start configuring network.
Start using internet radio Press
Edit your favorite list On the Favorite list, choose the radio station you want to edit then press the right ► key on the remote control, or the button on the radio.
Media Centre UPnP (Universal Plug and Play) You can stream music from the Networked device which supports UPnP function to the radio to play. For instance, most of the latest computer laptop supports UPnP, and you can stream music from Windows Media Player application on the computer and listen on your radio. Please make sure your computer laptop is on the same Wi-Fi network as the Radio before you start using this function 1.
2.1.4 From the ‘Media Sharing’ windows, the radio will be listed as an unknown device. Click on the unknown device listed, then click the ‘Allow’ button and then click ‘OK’. Allowing the Radio to Connect: 2.2 Windows 7 / Windows Media Player 12 2.2.1 If you are using WMP 12, simply go to and choose to retrieve the music files you would like to add to library. 2.2.
iii) Set the network location iv) Choose Home network v) Create a homegroup, then choose the kind of media file to be accessed, such as music..etc.
vi) Launch the Windows Media Player, select and choose from the drop down list. vii) You can now enjoy the music streaming from the windows media player. Music streaming via UPnP 1. Once the UPnP server is configure to share media files with your radio, you can start music streaming. 2. On the main menu, select and choose 3. It may take a few seconds for the radio to complete the scan for available UPnP servers.
Please preset your favorite station before setting the alarm. Repeat – You can schedule the alarm as you desire – Everyday, Once or multiple days. Alarm Volume – Adjust the volume of the alarm as you like by rotating the dial. 4. After the above settings are completed, press the left button to exit and make sure the Alarm is turned on. You will see the Alarm icon appeared on the display if it is activated.
IP The IP is set by default. Select to change IP according to your network condition. DNS The DNS is set by default. Select to change DNS according to your network condition. Wi-Fi Channels Not all of the Wi-Fi channels are available in every country. There may be variation between different countries. Therefore it is necessary to choose the Wi-Fi channels to ensure the Wi-Fi performs satisfactory.
when the radio is power on. Dimmer You can set the display backlight level as you prefer. There are two settings available: Mode and Level setting Mode: Normal or Dim Normal – the display will stay with the same level of brightness all the time without dim down. Dim – the display will dim down after 15 seconds if no operation is made on the radio.
Press the button on the remote controller, choose and scroll to to view the IP address On the main menu, go to Configuration>Information> Network>IP 3. Open the web browser (we support Internet Explorer and Chrome) in your PC and type the IP address of the radio (e.g. 192.168.1.11). Ensure your PC is on the same Wi-Fi network as the radio. The screen will pop up as below: 4. You can input the name and URL of a new radio station under the Add channel section, then click Submit.
1. If the Internet Radio keeps re-buffering radio station: The Internet Radio is streaming the data from the radio station via your broadband connection, if there is a high error rate on your broadband connection, or the connection is intermittent, then it will cause the Internet Radio to pause until the connection is reestablished and it has received enough data to start playing again.
The Internet Radio streams music data from the PC while you are listening. If a stream gets blocked or experiences Internet congestion while transferring it may stop/interfere with the quality of play. If this happens, check your internet connection speed- it must be faster than the speed of the streams. Technical Specification Model: WR-232 Power input: 9V 0.8A Power voltage: 100-240V~50/60Hz Wireless Network: IEEE802.11b/g/n Security Protocol: WEP/WPA/WPA2 Audio output power: 3W (RMS) Audio sockets: 3.
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
