User's Manual

ManualsBrandsOCCSensaBLE ManualsElectronicsOCCSensaBLE Basic

OCCSensaBLE BASIC

Installation and User’s Manual

Description and Operation

The OCCSensaBLE BASIC is a Bluetooth commercial LED lighting controller providing motion detection and daylight

control. The controller is designed to mount on the bottom of the lighting fixture with a simply threaded nut installation

process. It requires a DC supply voltage of 5 to 12 volts and generates a Pulse Width Modulation signal for controlling the

LED power supply output. The PWM signal range is from 0 to 100%. This controller is designed to operate with an LED

power supply that supplies an auxiliary low voltage power supply for controller power and has “dim to off” capability.

The controller utilizes a digital Passive InfraRed (PIR) detector for motion control and a digital ambient light sensor for

daylight control. The PIR sensor is triggered by heat energy (infrared) emitted by a moving body or vehicle within the

coverage area. Three Fresnel lenses are available for the PIR sensor to provide optimal detection coverage based on the

height of installation.

The controller provides three daylight control modes of operation:

1. Dusk to dawn control turns the fixture on at dusk and off at dawn. During this period, motion detection can be

configured to control the operation of the light. E.g. detected motion will turn the light to full brightness, after

motion detection ceases for a period the light will be programmed to reduced brightness and may optionally be

turned off after a period.

2. Part night lighting control will turn the light on at dusk and off at dawn. It will reduce the output of the light for a

user specified period during the middle of the night.

3. Motion setpoint control allows the user to specify motion control based on the ambient light level. For the user

specified ambient light setpoint, motion control will activate the light when the ambient light is below the setpoint.

The controller can operate any LED power supply that utilizes PWM dimming and provides the required DC power for the

controller to operate.

The controller will operate a default “dusk to dawn” control profile unless reprogrammed using the Bluetooth mobile

application provide for Android and iOS devices.

Specifications

Input voltage - 12VDC nominal, 5VDC min 15VDC max

Input current - 30mA max current

Output - Pulse Width Modulation dimming output 0 – 3.3 VDC, frequency 2kHz, 0 to 100% waveform

Summary of content (4 pages)

PAGE 1
OCCSensaBLE BASIC Installation and User’s Manual Description and Operation The OCCSensaBLE BASIC is a Bluetooth commercial LED lighting controller providing motion detection and daylight control. The controller is designed to mount on the bottom of the lighting fixture with a simply threaded nut installation process. It requires a DC supply voltage of 5 to 12 volts and generates a Pulse Width Modulation signal for controlling the LED power supply output. The PWM signal range is from 0 to 100%.
PAGE 2
Environmental Operating Temperature: -40C to 80C Operating Humidity: 20-90% IP66 compliant Control parameters: Motion control sensitivity – low, medium, high Max output hold time after motion – 1 minute to 4 hours Min output hold time – off, 1 minute to 4 hours, always on Motion setpoint – 100 lux to 2000 lux Max output – 30% to 100% Min output – 0% to 90% Daylight Control modes – Dusk to Dawn, Part Night Lighting & Motion Setpoint Dusk Level – 5 Lux to 550 Lux Dawn Offset Level – 5 Lux to 250 Lux Part Nigh
PAGE 3
Lens Options Three lens options are provided for fixture mounting heights from 10’ to 40’. The lenses recommended for taller mounting heights have a narrower field of view. The narrower field of view at taller heights maintains signal strength required for motion detection.
PAGE 4
conforme aux limites d’exposition RF ISED dans des conditions d’exposition mobiles. (Les sont á plus de 20 cm du corps d’une personne). OCCSensaBLE Mobile Application The OCCSensaBLE™ mobile application is available for both iOS® and Android® devices. Search “OCCSensaBLE” in the app store to download. The mobile app is a configuration tool used for modifying and testing the OCCSensaBLE™ Bluetooth enabled controller from a mobile device.