Tail Auto-Director AI Camera Getting Started V0.1 2 2018.10.
Product Overview What Is Tail Auto-Director AI Camera Tail Auto-Director AI Camera is a first-generation consumer-grade smart camera researched and developed by Remo. Fusing AI and motion control technologies with professional-grade imaging, Tail Auto-Director Ai Camera can take charge of video and photo shooting, giving content creators powerful functions and an all-new camera experience. Tail Auto-Director AI Camera is equipped with an AI processor that provides powerful computing performance.
Indicator Statuses Battery Indicator Camera Indicator The camera indicator has five statuses: Red indicates warning, yellow indicates notification, green indicates normal standby or shooting, blue indicates gesture interaction or device system initialisation, and alternating green and yellow indicates calibration or upgrade.
3 green flashes of all 3 bars indicates shooting under Burst mode Repeatedly Blue flashes of all three bars from 1 to 3 indicates device system initialization Blue flashes of 1, 1&2, and then 1&2&3 bars and then 1 blue flash of all 3 bars indicates a successfully performed gesture Continuous flashes of alternating green and yellow on all 3 bars indicate that an upgrade or gimbal calibration is in progress Obsbot Studio App Download & Installation If you use iOS, go to the App Store and search for " Obsbot
Press and hold the power button for 3 seconds to turn the camera on or off. Connecting to the App 1. When you turn on the Tail Auto-Director AI camera, the device will run a self-check, while the camera indicator slowly flashes yellow. After the self-check is completed, the camera indicator will turn to steady green. 2. Enable the Wi-Fi function on your mobile device and run the OBSBOT Studio App. Select the OBSBOT-XXX network and enter the default password "12345678" to connect.
3. After connecting to your mobile device, go to the shooting interface shown below. Gesture Control Tail Auto-Director AI Camera provides a simple and easy-to-use gesture control function, allowing you to conveniently command the camera to shoot photos or videos. Go to the Settings tab on the app homepage to enable or disable the gestures function. Tail AutoDirector AI Camera can recognize gestures made near your face and the camera indicator light will turn blue.
previously selected target. You can select one or two objects as targets. After selecting the desired target, tap the Confirm Target button to complete target selection. • Quick Mode: Tap the "Quick" button to have the camera select the object of the largest relative size in its current field of view as the target and automatically leave the target selection mode.
Complete Device Dimensions Weight (incl. battery) Power consumption (incl. camera) In use: 167.2*86.7*85.5mm Off: 185.7*86.7*85.5mm 580g 8W Gimbal Angle jitter Gimbal installation Controllable range of rotation Structurally possible range Max control speed ±0.02° Non-removable Pan: Unrestricted; Tilt: -50° to +50°; Roll: -45° to +135° Pan: Unrestricted; Tilt: -90° to +90°; Roll: -135° to +135° 180°/s Camera Model Tail Auto-Director AI Camera Image sensor 1/2.3'' CMOS SENSOR; effective pixels: 12.
Image format JPEG, DNG (RAW) Video format MP4 Supported memory cards Operating temperature Audio input Micro SD, Class 10 and above, or UHS-1 card; up to 128 GB 0°-40° Analog MIC Wi-Fi Operating frequency Signal transmission range 2.4G / 5.8GHZ /5.2GHz 2.4G: 50m (awaiting testing) 5.8G: 100m (awaiting testing) 5.2G:100m(awaiting testing) Battery Model OBS-LI-TWS-001 Type LiPo Capacity 1850mAh Energy 20.54Wh Voltage 11.
Warning words This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
