TAB-2M & TAB-4M Tripod Accessory Bar You’re on steady ground ®
Thank you for choosing Oben. Oben’s two-mount (TAB-2M) and four-mount (TAB-4M) accessory bars turn any tripod into a customizable workstation. They add a sturdy aluminum bar with additional mounting points for accessories such as a camera, light, monitor, microphone, or laptop computer. The sturdy 23-inch-long, 30 mm aluminum tube features heavy-duty mounts that are all outfitted with set screws to securely hold your accessories.
Operation Mount the Accessory Bar to the Tripod Align the tripod’s 3/8-16 threaded post with the accessory bar’s socket, and tighten with the thumbscrew until secure. For increased stability: If the tripod has a set screw, tighten it until it’s snug, but don’t overtighten it. Adjusting the Tripod Mount and Top Mounts 1. To adjust the position of the tripod and top mounts, loosen the locking handle by turning it counterclockwise. 2.
Five-Year Limited Warranty This Oben product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of five (5) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.