Specification Applicable to the DP50-1 products Revised 14 Jay 2020
I. INTRODUCTION 1. PRODUCT PROFILE This device is a new Android-based vehicle trouble diagnostic Internet device developed applications. It inherits for from OBDPROG advanced diagnosing technology and it is characterized by covering wide range of vehicles, featuring powerful function, and providing precise result. Through vehicle diagnostic OBD connector and variant mobile intelligent terminals, it achieves vehicle trouble diagnosis for full car model and full system vehicle.
Diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and Chinese. Diagnosis functions include: Read DTCS, Clear DTCS, Read data stream, Special functions etc. Classify special function: ABS, EEPROM Adapter, Battery match, CVT learning, EPB, Gear learning, Immobilizer, TPMS (low tire) reset, Cluster calibrate, ECU programming, steering angle reset. Specially designed for Android platform with clear and user-friendly interface; 2.
Set VCI formation, language, unit, data logging, user information etc. 6. Remote assistance: Achieve remote assistance by this function. 7. Report center: Record maintenance data logging and create reports during operation. 3 KNOWLEDGE OF THIS DEVICE 3.1 The whole set This device is composed of the tablet computer, main test cable and kinds of connectors. 3.
front view reverse view 4 TECHNICAL PARAMETER ● Operation system: Android 5.1.
A7@1.2Ghz ● Battery: 2600mA, rechargeable polymer lithium battery ● Extension memory card: 32G Micro SD (TF) card supported ● Memory capacity: 16GB ● LCD: 5.
5 ACCESSORY（Standard Configuration） 5.1 Main test cable Pack different main cable according to different configurations 5.2 OBD Connector OBD I connector to connect the diagnosis port of non OBD II vehicles. To choose the connector according to the vehicle brand and models.
Note: Different configuration accessories may have different options 5.3 Others DC Power Adapter (Output DC 12V/2A) To power up the tablet via connecting with outside power supply. 6 CHARGE THIS DEVICE 1. Connect the included USB cable with charger. 2. Plug the charger into AC outlet. 3.
indicates ， it indicates that the battery is in charging 4. When battery logo changes into , it indicates that the battery is fully charged and then disconnect charger from AC outlet. 5. Unplug USB cable on the charger from this device. 7 USING BATTERY ● If the battery keeps unused for a long time or battery is completely discharged, it is normal if it cannot be turned on while being charged. Please charge it for a period and then turn it on.
consumption status. ● While this device has low battery, a beep will sound. If it is very low, this device will be switched off automatically. Note: Do one of the followings to save power: 1. When this device keeps unattended, press POWER key to turn off the LCD. 2. Shorten the standby time: Enter main menu, choose “Settings” > “DEVICE”> “Display” > “Sleep” to select a shorter standby time. 3.
8 POWER ON/POWER OFF THIS DEVICE 8.1 Power on Press and hold Power button for three seconds to turn on this device. Note：Set date, time and time zone. 8.2 Power off Press and hold Power button for three seconds to turn off this device. 9 ABOUT DESKTOP The screen is shown as blow: A． Print screen : make a quick screenshot and save it to gallery B ． Back button : go back to previous interface or exit program.
F. VIC button : enter system settings 10 CUSTOMIZE YOUR DESKTOP 10.1 Add items on the desktop On the main menu, hold and press the desired item, the system will automatically enter the desktop and place the icon into the circle. Hint: If many applications occupy the desktop, hold and press the desired one to move it to other extension desktop. 10.2 Move items on the desktop 1. Hold and press the item to be moved. 2. After a movable circle appears on the screen, drag it to the target location. 10.
10.4 Change your wallpaper 1. Hold and press a blank area on the desktop, a pop-up wallpaper will be shown on the screen. 2. Choose desired wallpaper. 3. Click upper left corner √ to set wallpaper. 10.5 Create a folder on the desktop 1. Drag one icon to another icon, the system will create a folder. 2. Input the folder name. 11 ON USING TOUCH SCREEN ● Tap: use your finger to tap desired items to confirm or open it.
12 AUTO-R0TATE THE SCREEN To perform such operations as browsing webpage, viewing images etc., rotate this device, the screen will automatically change the display direction. To disable this function, click “Settings” and click “display” to enter. Unselect the option “Auto-rotate the screen”. Note: This product application does not support rotating screens. 13 LOCK&UNLOCK 13.1 Lock the screen ● When Key Master is ON, press POWER key to lock the screen.
then drag the lock to “Unlock position.” 14 NOTIFACTION PANEL The notice panel is used to display some activities, messages to remind and inform users. 14.1 Turn on the notification panel 1. When a new notification icon appears on the status bar, slide the status bar upwards to open it. 2. In the notification panel, click the desired notification item to open it. 14.2 Turn off the notification panel Slide the panel upwards, and then specify the notifications as OFF to turn it off.
The default input method, Sogou input can support powerful word stock engine, Intelligent Sogou input and multiple keyboard mode. Android keyboard and Google input method and make input easier. To start text input mode, please click any text input entry. 16 HOW TO SET AS AIRPLANE MODE According to the regulations of some countries or areas, PC device must be turned off before boarding on the airplane. The way to disable functions of this device is to set it as airplane mode.
“Settings” > “WLAN” > “More…” >“Airplane mode”. II. OTHERS 1 WLAN This function enables you to enjoy surfing on the Internet and downloading data from the Internet via Wi-Fi. 1.1 Set WI-FI on 1. Enter main menu screen, choose “Settings” > WLAN 2. When the WLAN sign appears blue, it indicates Wi-Fi has been activated already. Note: To prolong the battery life, please switch Wi-Fi off when it keeps unattended. 1.
input password, then you can surf the Internet by WLAN. 2 Browser You can use any APP based on browse website and network. 2.1 Open browser Enter main menu screen, tap to OBDPROG the browser. You can choose the desired homepage or input the website address to browse. 1. Tap to input or edit the web link 2.2 Browser webpage 1. Open the browser. 2. Input the web address, and tap “Go” on the keyboard to visit the website.
3. After a webpage is open, slide the screen with the tip of your finger to view other hidden content. 2.3 After a webpage is open, slide the screen with the tip of your finger to view other hidden content. There are two ways to zoom in/ zoom out while browsing a webpage. ▪ to zoom in so that the text on a webpage appears in a column that fits your device’s screen, double-tap with the tip of your finger. ▪ to zoom in manually, place two fingers on the screen and then spread them apart.
2. Edit a label for the bookmark. 3. Tap “OK” to confirm and save it. 2.5 Open multiple pages The browser allows you to open multiple web pages and you can toggle between these pages. 1. While browsing a webpage, tap the Fold Button at the top right and open new window. 2. Another web page will be displayed in the new window. 2.
3.1 Open gallery Enter main menu screen, tap “Gallery” to access it. The system searches images and videos in this device and SD card automatically, and categorizes it into corresponding folders. 3.2 Browse images 1. Enter main menu screen, tap “Gallery”. 2. Tap the picture folder you want to view. 3. Tap the desired image to browse. 4. Swipe the screen rightwards or leftwards to view the next/previous picture. 4 MUSIC Music files are stored into 4 categories: Artists, Albums, Songs and Playlist.
5 CALCULATOR You can use calculator to operate algorithm of plus, subtract, multiply and divide, and function operation of sin, cos, tan and log. 6 CALENDAR This function lets you view calendar or create to-do events. Enter main menu screen, tap “Calendar”. Swipe up and down to switch to month; Tap someday, the followings can be done. Tap to refresh, search, and hide control and setting. 7 ALARMS 7.1 Add an alarm 1. Enter main menu, and tap “Alarm”. 2. Tap to add alarms. 3.
4. Tap to pack up the alarm to store the setting. 7.2 Delete an alarm 1. Enter main menu, and tap “Alarm”. 2. Tap the desired alarm. 3. Tap to delete it. Tips: After the alarm is deleted, you can choose to cancel delete alarm on the right side from the option menu. 7.3 Customize your alarm 1. Enter main menu, and tap “Alarm”. 2. Tap menu button, and then choose “Settings”. 3. Alarm volume: Set the volume of alarms. 4. Set the duration of alarm. 5. Set the duration the alarm snooze next time. 6.
7.4 Countdown set 1. Enter the main menu to tap to choose count down alarm; 2. Set the time of countdown; 3. Tap to add count down alarm, and tap to delete alarm; 4. Tap to start count down, and tap to stop count down; Notice: after the countdown ends, the device will ring alarm sound. 7.5 Second clock setting 1. Enter the main menu to tap to choose second clock; 2. Tap to start second and clock, and tap to stop second clock; 3. Tap to reset second time; 4.
You can manage SD card, browse by category and browse all music, picture, video, document application, package, favorites, installation package, management recommended through catalogue. 9 BRIGHTNESS 1. Enter main menu screen, tap “Settings” > “Display”. 2. Tap “Brightness” to enter. 3. Drag the slider leftward to lower the screen brightness. Drag the slider rightward to increase the screen brightness.
2. There are several options available for your selection. To define a pattern, follow the on-screen prompts to plot your pattern. 3. After drawing, tap “Confirm” to save your setting. 11 APPLICATION 11.1 View installed applications 1. Enter main menu screen, tap “Settings” > “Apps” to open the downloaded application list. 2. The following operations are available: ▪ Tap the desired one to view the application information.
3. To uninstall an application, tap it to enter the application information screen. 4. Tap “Uninstall” and then follow the on-screen instructions to finish it. 11.2 View the running applications 1. Enter the main menu screen, tap “Settings” > “Apps”. Scroll the screen from right to left to RUNNING tab to open the currently running application list. 2. The following operations can be done: ▪ View the currently running applications; ▪ Tap any one to stop it. 12 LANGUAGE&INPUT METHOD 1.
The device provides several kinds of input methods. Tap setting before the desired input method. 13 SET DATE&TIME This device is preset to use the network-provided date, time zone and time. Note: If Automatic date & time is set as Use network-provided time, date, time and time zone will not be defined. 1. Enter the main menu screen, and tap “Settings” > “Date & time”. 2. Tap “Set date”, and scroll the screen upwards and downwards until the desired numbers appear on the highlight area. 3.
5. Select or deselect “Use 24-hour format” to switch between 12-hour format and 24-hour format. 6. Tap “Choose date format” to choose the desired date of this device format from the list. 14 RESTORE KEY MASTER TO FACTORY SETTINGS This option enables you to restore this device to the default factory settings. Once it is reset, all data (including downloaded applications) will be deleted. Note: Before resetting to factory data, please back up all important data saved in your device. 1.
15 STORE Enter the main menu, and tap setting> store check the store situation of the device. Store the download content in the default browser to the download content list. 16 APPS INSTALLATION/ UNINSTALLATION 1. Install: Put the application package under the root directory of SD card, enter “File Manager” and then tap the desired package to start installing. 2. Uninstall: Tap “Settings” > “Apps”, and choose the desired one to uninstall. III. ONE KEY UPGRADE 1.
If not, click “No”, you will directly return to the main interface. However you cannot enter the upgrade diagnosis application interface.
Click on the installation and perform the program installation, automatically close the program and install. After installation, click on the program image to re-enter the DP program: Re-enter the main interface and prompt statement. (Notes: Ensure Internet connection is normal when updating.) 2.
Tap main screen “batch update”, start downloading and upgrading If a software needs to be canceled, just tap the corresponding Check Box.
After the upgrade is completed, you can enter the diagnostic programming to view the upgrade version description and the version number, and you can perform related diagnostic operations and functions. (Notes: Ensure Internet connection is normal when updating. Besides, because of many software, it may take several minutes, please wait patiently.
IV. DIAGNOSIS INSTRUCTION 1 CONNECT VCI CONNECTOR Procedure to connect VCI connector: 1. Locate vehicle’s DLC socket. The DLC (Data Link Connector or Diagnostic Link Connector) is the standardized 16-pin connector where diagnostic code readers interface with the vehicle's on-board computer. The DLC is usually located 12 inches from the center of the instrument panel (dash), under or around the driver’s side for most vehicles, as shown below.
2. Plug the diagnostic connector into the vehicle’s DLC socket (It is suggested to use the OBD 2 extension cable to connect VCI connector and DLC socket.). For non-16PIN DLC socket, please select the corresponding non-16 pin connector adapter, then plug the non-16pin end of the adapter into the DLC socket, and then connect the standard 16pinend VCI connector. 2 DIAGNOSIS FLOWCHAT For new users, please follow the 3.1 to get familiar with and start using this device.
3 USER REGISTRATION 3.1 User Registration Click to enter diagnostic software, select “the user information” in “Settings” menu, and then enter user registration window. As following photo shown: Fill in the information in each field (Items with * must be filled).
4 DIAGNOSTIC SOFTWARE MAIN INTERFACE INTRODUCTION Function menu included as follows: Diag Program: Operate as a diagnostic tool.
Upgrade: To download diagnostic software or upgrade diagnostic software to the latest version. Data Center: Provides abundant automotive technology, video data, handbook and repair case for your reference, and also including relevant information of this product. Log feedback: Record maintenance data and diagnostic report. Settings: It includes VCI information, language, unit, data records, user information, about. Remote assistance: Realize remote hosting operation.
Hereinafter, take OBDII for example, to introduce how to start diagnosing. Tap “OBDII”, and tap “OBDII” icon.
To select software version, as following photo shown: To enter diagnostic function menu, as following photo shown:
To select AUTO SCAN, as following photo shown: 5.
5.
5.3 Clear trouble code 5.
6 DATA CENTER We have powerful maintenance database and detailed product introduction information.
6.1 Video Center Connect the diagnosis function operation videos of the actual vehicles; 6.2 Car Area Automobile data cloud platform from subsidiary products of the company Car Area; 6.
6.4 FAQ Summarize some common problems encountered in the use of the product; 7 SYSTEM SETTINGS It includes VCI information, language, unit, data records, user information and about etc. 7.
7.2 Language 7.
7.4 Data records 7.5 User information It used to set and manage user’s information.
7.5.1 User login 7.5.
7.5.3 Forget password 7.5.
7.5.5 Info modification 7.5.
7.6 About Display software version updates and product announcements. 8 REMOTE ASSISTANCE This application can realize remote hosting operation via the Third Party’s software: Quick Support.
9 LOG FEEDBACK Diagnostic Report: Each diagnosis operation will create new diagnostic report. Those reports will be grouped by Month.
Maintenance Station Information: Record related information of Maintenance Station.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes approved or by modifications the party not expressly responsible for compliance could void the user's authority to operate the equipment.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
