Submittal Sheet

ManualsBrandsOatey ManualsPlumbing Supplies32 oz. Oateyweld Heavy Duty Solvent Cement (Clear)

Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | 800.203.1155 | Oatey.com

Oatey Co. is part of the Oatey family of companies

Job Name Item #

Location

Engineer Contractor

PO # Tag

Representative

PVC HEAVY DUTY

CLEAR CEMENT

TECHNICAL SPECIFICATION

8/19

VOC

Maximum VOC per SCAQMD 1168/316A or BAAQMD Method 40: 510 g/L

CHEMICAL PROPERTIES

Appearance Clear Liquid

Viscosity Min. 1600° cps @ 73° F ± 2° F

Density 7.86 ± 0.2 lbs/gallon

Shelf Life 3 Years from Mfg. Date

SET TIME / CURE TIME

30° F to 50° F 4 – 5 minutes

50° F to 70° F 3 – 4 minutes

70° F to 90° F 1 – 2 minutes

PRODUCT NUMBER SIZE DESCRIPTION CTN. QTY

30850 4 oz.

PVC Heavy Duty

Clear Cement

30863 8 oz.

PVC Heavy Duty

Clear Cement

30876 16 oz.

PVC Heavy Duty

Clear Cement

31008 32 oz.

PVC Heavy Duty

Clear Cement

31011 Gallon

PVC Heavy Duty Clear

Cement - Wide Mouth Can

SPECIFICATIONS

• Heavy Bodied Clear cement for use on all schedules and classes

of PVC pipe and ﬁttings up to 12" with interference ﬁt, 18" for

DWV applications.

• Lo VOC Solvent Cement that meets California South Coast Air Quality

Management Districts (SCAQMD) 1168/316A or BAAQMD Method

40 requirements.

• Thick Formula ﬁlls gaps in large diameter pipe and ﬁtting joints.

APPLICATION / USES

• Recommended for potable water, pressure pipe, conduit

and DWV applications.

PROPERTIES

Compliant with LEED Requirements. Solvent cements may be speciﬁed

under the LEED v4 EQ for Low-Emitting Materials to obtain points

ASTM Standard D2564, NSF Standard 61 for PW,

DWV and Sewer Waste, IAPMO Listed

Summary of content (2 pages)

PAGE 1
PVC HEAVY DUTY CLEAR CEMENT TECHNICAL SPECIFICATION Job Name Item # Location Engineer Contractor PO # Tag Representative SPECIFICATIONS • Heavy Bodied Clear cement for use on all schedules and classes of PVC pipe and fittings up to 12" with interference fit, 18" for DWV applications. • Lo VOC Solvent Cement that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements.
PAGE 2
PVC HEAVY DUTY CLEAR CEMENT TECHNICAL SPECIFICATION DIRECTIONS PRECAUTIONS Store and use at temperatures between 40°F and 110°F. • At temperatures outside of this range, special care must be taken to make good joints. Stir or shake before using; if jelly-like, don’t use. Do not thin Read all information carefully before using this product. 1. Pipe ends must be cut square, deburred and chamfered. 2. Check interference fit of pipe and fitting. Pipe should easily go 1/3 to 2/3 of the way into the fitting.