FIXX User Manual
CONTENTS Attentions ............................................................................... 3 1、Brief Instruction ............................................................................... 5 1.1 Keys location ..................................................................... 5 1.2 Keys description ................................................................ 6 2、Usage ................................................................................................... 8 2.1 Make a call ....
Thanks for buying our products, in order to make the best use of your phone, please read the manual carefully. Attentions: ◇Please turn off the device in the places(gas stations, oil storage plants and chemical factory, and the place around with inflammable and explosive objects, etc) where do not allow to use wireless transmitting devices. ◇Please use slightly damp or anti-static dishcloth to clean the device, other than use dry or cloth that is easily make static.
◇Suggestive note of “Regulations on the Management of Recycling of Waste Electrical and Electronic Products”: ◇Encourage users to comply with the national laws and regulations on the recycling of waste electrical and electronic products when they no longer need such products, and transfer them to local manufacturers with nationally recognized recycling qualifications for recycling.
1、Brief Instruction 1.1 Keys location 1. LCD 2. right key 4. direction key 5. Send key 3. left key 7. numerical keys 8. *key 10. M1 11. M2 13. M3 14. WIFI 6. on/off 9. # key 12. M4 15. Redial 16. hands free key Note: The phone function is subject to the actual device.
1.2 Keys description ·Left: In on-hook status, press the key to enter main menu; In menu status, press the key to carry out the function shown in the left bottom of LCD.
·Numerical keys: In on-hook, off-hook or hands free status, press the corresponding number keys to enter the phone number to be dialed; In input state, input the corresponding letter according to different input methods. ·# Key: In input state, press the key to enter the switch between input methods. ·* key: In input state, press the key to input the special symbol. ·Send key: After dialing a group of numbers, and press the key to call the number you want to dial.
directly. ·Redial keys: Dials the last set of numbers that were last dialed. Note: The phone function is subject to the actual device. 2、Usage Before starting the machine, please make sure that the USIM card has been inserted into the card slot and the power is connected. After booting up and searching for the network signal, you can start using it. Warning: Always turn off the device before removing the USIM card.
tone, then press the [Send] key to call out; 3) Find your wanted records in the phone book, call log, or inbox, press [Send] key to call out or select call in the menu; 2.2 Receive a call When a call coming, pick up handset or press [HF] to receive the call; 2.3 End a call 1) In off-hook calling status, hang up the handset to end the current call; 2) In hands free calling status, press the [HF] key to end the current call. 3) Press [on/off] key to end the call. 2.
after hearing the dial tone, you can make a call. 2.7 WIFI functions In the standby mode, press the left soft key to enter the menu, select the hotspot menu, open the WIFI hotspot, and use other smart devices to find the WIFI signal. 3、Input methods 3.1 Input methods There are many inputting methods: CH, abc, ABC, 123 etc. Press [#] key, you can switch inputting methods. Press [*] key, you can input special symbols. Press [0] key, you can input blank. (under the CH, abc, ABC input method).
Inbox It is used to store the received messages. You can perform the following operations on the received SMS: forward, reply, delete, call and add to contacts. Outbox It is used to store the SMS messages that failed to be sent. Draftbox If you save the message to the drafts when editing, it will be saved well in drafts. You can perform the following operations: forward, delete,etc. Sentbox It is used to store the sent messages.
Call duration: Helps you check the time of call. For each call record, you can do the following by pressing Options: Call, Send messages, clear all calllog, detail, add to contacts. 3.4 Contact In standby status, press the corresponding soft keys→to enter the Contacts list interface. The options that can be performed in the contact list are: search, new, detail, edit, call, send message, batch copy, batch delete, storage available, quit.
3.5 Settings Sound settings Volume: Helps you adjust the volume of the following functions: ringtone, notifications, media volume, alarm. Call ringtone: Can choose the ringtone you prefer. Default notification: Can choose the one you prefer. Screen lock sound: Turn on/off the screen lock sound. Tap sounds: Turn on/off the tap sounds. Sleep settings Can set the time according to your requirements: 15 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes, 30 minutes.
password, lock SIM card. Reset The device will be restored to the factory setting parameters. Date & Time Automatic date & time: Can turn on/off the automatic date & time. If turn on this function, the function of “set date” and “set time” is not available. Also you can turn off the function of “automatic date & time” and set the date & time by yourself. Use 24-hour format: Available. Language: English and Spanish available.
Mobile networks: Can choose the preferred network type according to the requirements. 3.6 Organizer Calendar Support the simple view of calendar, you can jump to the specified date Calculator Support the simple numerical calculations. FM Radio Support search for FM channels, view search lists and volume adjustments. Alarm No more than 10 clocks can be set, you can set the alarm time, repeat method and volume. 3.
4、Technical Specifications 1. Conditions for use Operating Temperature： Humidity： -10℃~+50℃ 0%~95% Atmospheric Press： 86kPa~106kPa 2.
5、Common problems and causes Malfunction phenomenon Can not turn on Possible Cause PIN code error 1. Insert the wrong USIM card 2.USIM card has been locked, which need the professional officer initialize the phone “Fall line” in communication 1. Battery is weak 2. Signal strength is weak Low Volume Under talking status, press up/ down key to adjust volume 1. WIFI switch is not open 2.The data connection switch is not open 3.
6、Package contents Items Quantity (pc) Main unit 1 Handset 1 Handset spring wire 1 TNC Antenna 1 Power adapter 1 User manual 1 Battery 1 KT4(1C) 18
FCC Statement 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.
harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
-- Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information: This product meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
exposure requirements, use accessories that maintain a 25mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-worn Operation This device was tested for typical body-worn operations.
RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
