WS55 INSTRUCTION MANUAL WIRELESS HD TRANSMITTER
CONTENT WHAT'S INCLUDED............................................................................................................................ 3 OVERVIEW........................................................................................................................................... 3 INSTALLATION.................................................................................................................................... 4 LED BEHAVIOR....................................................
WHAT'S INCLUDED • Digital Wireless HD Transmitter • 5ft HDMI Cable • Digital Wireless HD Receiver • 2x Screws/Screw Anchors • 1 External IR Receiver • 1 Year Warranty • 1 External IR Emitter • Lifetime Customer Support • 2x 100-240V AC Power Adapters OVERVIEW HDMI IN HDMI OUT IR OUT POWER HDMI IN HDMI OUT IR OUT TRANSMITTER HDMI OUT IR IN POWER RECEIVER 3
INSTALLATION RECEIVER RECEIVER RECEIVER TRANSMITTER DEVICE TRANSMITTER HDMI IN HDMI OUT HDMI 1 IR OUT HDMI 2 TRANSMITTER HDMI IN HDMI OUT DEVICE HDMI 1 IR OUT HDMI 2 TOP VIEW DEVICE 30° 30° TOP VIEW 5-10cm HDTV DEVICE RECEIVER DEVICE TRANSMITTER 30° 30° IR sensor5-10cm must be in front of IR window of device.
HDMI IN HDMI OUT HDMI 1 IR OUT HDMI 2 TRANSMITTER DEVICE IR EXTENDER SETUP HDMI IN HDMI OUT HDMI 1 IR OUT HDMI 2 TOP VIEW DEVICE 30° 30° 5-10cm HDTV DEVICE RECEIVER TRANSMITTER TOP VIEW IR DEVICE IR sensor must be in front of30° IR window of device. 30° 5-10cm HDTV DEVICE RECEIVER TRANSMITTER IR IR sensor must be in front of IR window of device.
SPLASH SCREENS CONNECTING SCREEN: Receiver is searching for Transmitter. Please wait. TROUBLESHOOTING SCREEN: Receiver has not yet found Transmitter, please check the displayed tips to ensure connection. PAIRING MODE SCREEN: Receiver has entered manual pairing mode.
TV RECEIVER LED BEHAVIOR LED Behavior WHEN CONNECTED: LED will remain solid white permanently WHEN CONNECTED: LED will remain white permanently WHEN NOTsolid CONNECTED: WHEN NOTturn CONNECTED: LED will on for 1 second, LED will turn on 3 forseconds 1 second, then off for then off for and 3 seconds and repeat repeat PAIRING BUTTON: Pairing Button: To use to pair with additional receivers or to Use torepair pairincluded with additional manually Transmitter and Receiver.
HDMI 1 HDMI 2 3. Plug the external IR receiver into the IR IN socket on the back of the receiver 4.
DEVICE WALL MOUNTING PAIRING MODE SCREEN: Receiver has entered manual pairing mode. 1. Drill pilot holes. 2. Insert the supplied two Anchors into the wall. TOP VIEW DEVICE 30° 30° 5-10cm LED Behavior ER EIVER IR IR sensor must be in front of IR window of device. WHEN CONNECTED: LED will remain solid white permanently WHEN NOT CONNECTED: LED will turn on for 1 second, then off for 3 seconds and repeat 3. Insert two screws into the anchors.
TROUBLESHOOTING No Video Check the status of the Link LEDs, and check if the HD device is working normally. Check the HDMI cable is undamaged and is plugged into the correct socket. Check that the correct HDMI output has been selected from the HD device’s menu and that the HDMI cable is plugged into the correct output socket. Check that the correct HDMI input has been selected from the TV menu and that the HDMI cable is plugged into the input socket selected.
FAQ Thank you for your purchase of the Nyrius WS55. If you require any assistance please review the below Frequently Asked Questions. 1. WHAT DOES THE STATUS OF THE LED'S MEAN? SOLID WHITE LINKED Transmitter/Receiver is linked. FLASHING WHITE SEARCHING Transmitter/Receiver not in range. 2. NO HDMI INPUT CONNECTED. WS55 SOLID RED POWER ON The WS55 is now powered on and will begin connecting shortly.
5. THE WS55 APPEARS WARM AFTER PROLONGED USE. To transmit 3D or Full HD content wirelessly, the WS55 must process a large amount of data. Due to this, the unit may run at warmer temperatures than other electronic devices. We have designed the housing to provide proper ventilation to the unit as well as have designed the electronic components to withstand temperatures up to 80°C.
SPECIFICATIONS SUPPORTED VIDEO RESOLUTION 1080p, 1080i, 720p, 576p, 480p 3D COMPATIBLE Yes AUDIO FORMATS PCM 2CH, Dolby 5.1 PORTS & INTERFACES Transmitter: HDMI input, HDMI Loop Through (Output), Micro USB (for power), 2.5mm Jack (for IR Emitter) Receiver: HDMI Output, Micro USB (for power), 3.5mm Jack (for IR Emitter) WIRELESS RANGE 40ft (clear line of sight) TRANSMISSION FREQUENCIES 802.11 a,b,g,n ; 5.
FCC STATEMENT This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. WARNING: This equipment has been tested and is found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
SAFETY INFORMATION Read all instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug.
WARRANTY Thank you for choosing Nyrius! We guarantee your investment in our products is a solid one. Our products come with a complete one-year parts and labor warranty. High performance components combined with quality craftsmanship allow us to maintain the highest possible production standards. All items are guaranteed against defects in materials and craftsmanship.
