User Guide

ManualsBrandsNyrius ManualsElectronicsAries Pro Wireless HDMI Transmitter and Receiver to Stream HD 1080p 3D Video from Laptop, PC, Cable, Netflix, YouTube, PS4, Drones, Pro Camera, to HDTV/Projector/Monitor

NPCS600QUICK START GUIDE

Connect power to Receiver. Connect Receiver and TV with HDMI cable.

* Obstacles may decrease transmission distance. Interference may come from other wireless devices using 5GHz band. For

maximum performance, please use the included power adapters.

Connect Transmitter to HDMI output on computer

and plug in power cord to USB port on computer.

Ensure the TV is displaying the HDMI

input that the NPCS600 Receiver is

connected to.

For additional product information, please consult the manual at:

NYRIUS.COM/SUPPORT

HDMI

USB

RCA

VIDEO 1

HDMI

CABLE

COMPONENT

*Both HDMI and USB are required for connection.

Status LED

Info Button

Power Button

Status LED

Summary of content (6 pages)

PAGE 1
QUICK START GUIDE 1 NPCS600 Connect power to Receiver. Connect Receiver and TV with HDMI cable. Status LED Info Button Power Button * Obstacles may decrease transmission distance. Interference may come from other wireless devices using 5GHz band. For maximum performance, please use the included power adapters. 2 Connect Transmitter to HDMI output on computer and plug in power cord to USB port on computer. 3 Ensure the TV is displaying the HDMI input that the NPCS600 Receiver is connected to.
PAGE 2
PAIRING INSTRUCTIONS The NPCS600 Transmitter and Receiver come paired. If re-pairing is necessary use the below steps to reconnect the units. Press and hold down the power button LED on the Receiver and plug in the power adapter. Release the power button once the power LED blinks orange. 1 HDMI 2 Plug the power adapter into the Transmitter. Press and hold down the pairing button. 3 The Power LED should be ﬂashing white. The white ﬂashing speed will begin to slow down.
PAGE 3
FREQUENTLY ASKED QUESTIONS NPCS600 1. What does the status of the LEDs mean? SOLID WHITE LINKED Transmitter/Receiver is linked. FLASHING WHITE SEARCHING Transmitter/Receiver not in range. No HDMI Input connected. SOLID ORANGE STANDBY Receiver in power saving mode. SLOWLY FLASHING ORANGE PAIRING Receiver is in pairing mode. 2. What is the maximum transmission range? The NPCS600 has a maximum range of 100 feet line of sight.
PAGE 4
NYRIUS® WARRANTY Thank you for choosing NYRIUS® Consumer Electronics Products! NYRIUS gives the following express warranty to the original consumer purchaser or gift recipient for this NYRIUS product, when shipped in its original container and sold or distributed by NYRIUS or by an Authorized NYRIUS Dealer: NYRIUS warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship.
PAGE 5
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 6
Thank you for your purchase. If you require any assistance or additional product information, please visit: NYRIUS.