ARIES™ HOME (NAVS500) INSTRUCTION MANUAL WIRELESS HD TRANSMITTER
CONTENT WHAT'S INCLUDED...............................................................................................................3 OVERVIEW...............................................................................................................................3 INSTALLATION.......................................................................................................................4 POWER....................................................................................................
WHAT'S INCLUDED Transmitter IR Blaster cable Receiver HDMI cable Quick Installation Guide Anchors x2 Mini Power USB Adapter USB Power Supply OVERVIEW Power Button with LED Indicator HDMI Info Button Status LED Power Input HDMI Out Unused LED SERVICE IR OUT HDMI IR Blaster Extender Jack HDMI Source LEDs HDMI IN DC IN Main Unit Back Panel Power Button IR Button Front Panel Buttons and LEDs 3
INSTALLATION Transmitter SERVICE Connect the supplied power adapter to the DC IN jack of the transmitter and plug into power outlet. The white LED indicator will appear. HDMI IR OUT Connect 1 high-definition audio/video source to the transmitter HDMI RECEIVER HDMI Connect the receiver’s “HDMI OUT” to the HDTV's “HDMI IN” port. Connect the supplied power adapter to the USB Input of the receiver and plug into power outlet.
IR Extender Top view/vue de dessus Plug the external IR remote extender lead into the IR socket on the back of the transmitter DEVICE / APPAREIL 30°3 place the IR remote extender bubble in front of the HD device 0° SERVICE IR OUT 5-10cm HDMI IR sensor must be in front of IR window of device.
POWER During the warm-up, the POWER LED will blink until connection between the TRANSMITTER and the RECEIVER is established. It will take 15 - 20 seconds for the system boot up successfully. NOTE: Transmitter`s HDMI out will still function in standby mode HDMI Ensure your TV set or projector is set to the appropriate HDMI source and is powered on.
OSD (ON SCREEN DISPLAY) DESCRIPTION Mode Status Description OSD Display (on RX) Rx: Standby RX:ORANGE / TX:RED Tx: Active-Standby Power saving mode. Pairing RX searching for unpaired TX Please Activate Registration on Transmitter Unit RX cannot find new TX New WHDI source was not found Pairing Pairing manually pairing RX and TX Waiting for Signal Link After 80 seconds, can’t establish link on any channel.
WALL MOUNTING: (1) Drill pilot holes. (2) Insert the supplied two Anchors into the wall. (3) Insert two screws into the anchors. Leave 1/8” length for mounting the Transmitter or receiver.
TROUBLESHOOTING: No Video - Check the status of the Link LEDs, and check if the HD device is working normally. - Check the HDMI lead is undamaged and is plugged into the correct socket. - Check that the correct HDMI output has been selected from the HD device’s menu and that the HDMI lead is plugged into the correct output socket. - Check that the correct HDMI input has been selected from the TV menu and that the HDMI lead is plugged into the input socket selected.
FAQ 1. What does the status of the LEDs mean? SOLID WHITE FLASHING WHITE RX:SOLID ORANGE LINKED SEARCHING Transmitter/Receiver is linked. Transmitter/Receiver not in range. STANDBY No HDMI Input connected. Transmitter/Receiver in power TX:SOLID RED saving mode. 2. What is the maximum transmission range? The maximum range is 100 feet line of sight. If transmitting through walls or obstacles the range will be reduced. 3.
TX/RX WILL NOW BE PAIRED : 1. RX (Receiver) : Remove mini USB power adapter, make sure RX is without power. 2. Press Power button and then plug-in mini USB power adapter. (continue holding power button) 3. Release Power button, RX’s Power button LED will now flash bright orange. After the 3 steps above , you will see the following OSD : 1. TX (Transmitter): Remove TX 5V DC power adapter, make sure TX is without power. 2. Press Power button and then plug-in 5V DC power adapter.
AUDIO BIT RATE: Digital Audio from HDMI inputs: Up to 6Mbit/s bit-rate support. Support AC3 and DTS. 2-channel PCM: 16~24 bits audio sample with 32~96KHz sampling rate as below: 2channel PCM 16 bits 24 bits 32KHz YES YES 44.
SUPPORTED RESOLUTIONS: 2D VIDEO FORMAT RESOLUTION SUPPORT 640x480p @ 59.94 / 60Hz 480p YES 720x480p @ 59.94Hz 480p YES 720x480p @ 60Hz 576p YES 720x576p @ 50Hz 720p YES 1280x720p @ 50Hz 720p YES 1280x720p @ 59.94 / 60Hz 1080i YES 1920x1080i @ 50Hz 1080i YES 1920x1080i @ 59.94 / 60Hz 1920x1080p @ 50Hz 1080p / 60 1080p / 60 YES YES 1920x1080p @ 59.94 / 60Hz 1080p / 24 YES 1920x1080p @ 25Hz 1920x1080p @ 29.97 / 30Hz 1080p / 24 1080p / 24 YES YES 640x480 @ 59.94 / 72.
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
IC STATEMENT Industry Canada Statement This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
SAFETY INFORMATION Read all instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug.
WARRANTY Thank you for choosing NYRIUS® Consumer Electronics Products! NYRIUS gives the following express warranty to the original consumer purchaser or gift recipient for this NYRIUS product, when shipped in its original container and sold or distributed by NYRIUS or by an Authorized NYRIUS Dealer: NYRIUS warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship.