www.3nod.com.cn Shenzhen 3NOD Electronics Co., Ltd NB-200 User Guide Bluetooth wireless speaker system Page 1,Total 7 CONFIDENTIAL! © Copyright 3NOD.
www.3nod.com.cn Shenzhen 3NOD Electronics Co., Ltd Contents Pls. make sure that all of the contents listed below are found in the box: z 1 Bluetooth wireless speaker system z 1 Audio cable(3.5mm plug) z 1 USB cable z 1 Carry Pouch z 1 User guide Specifications z Power input: 5V 1A z Power output:2W x2 z Drivers: 1.5” full range x2 z S/N: ≥75dB z THD+N:≤1% (1KHz,Max Power Output) z Dimension: W146xH72xD75mm z Audio input: 1x3.
www.3nod.com.cn Shenzhen 3NOD Electronics Co., Ltd Product Overview F A B C D Front view E F G Rear view A – Volume Up / Volume Down B – Answer / Reject Call / Play / Pause C – Next Track / Previous Track D – On / OFF Switch E – Line in Port F – Mini USB Port G – Charging indicator F – Sync LED indicator Features and Benefits z Bluetooth 2.
www.3nod.com.cn Shenzhen 3NOD Electronics Co., Ltd Paring the NB-200 with a Bluetooth Device (First time connection) 1. Ensure the NB-200 is fully charged or that the NB-200 is connected to a power source. 2. Turn the main power switch located at the back of the NB-200 to the ON position. 3. Activate your Bluetooth device to the Searching mode (new device searching) 4. Press and hold the ‘Play/Pause’ button on the front of the NB-200 until the Red/Blue LED starts flashing on front of NB-200.
www.3nod.com.cn Shenzhen 3NOD Electronics Co., Ltd Operation of NB-200 as a Speaker phone (Device Dependant) 1. To answer a call – Press at the front of the NB-200. 2. To Reject a call – Press & Hold (3 Seconds) 3. To hang up a call – During a Call Press & Hold (3 Seconds) 4. To switch a call between speaker and Mobile Phone – Press (Once) 5. To Redial Last Calling number - Press & Hold (3 Seconds) at the front of the NB-200. at the front of the NB-200. at the front of the NB-200.
www.3nod.com.cn Shenzhen 3NOD Electronics Co.
www.3nod.com.cn Shenzhen 3NOD Electronics Co., Ltd user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.