DT-ENG-DX471/TD7-V1 / 201806 2 WIRE HOME Wi-Fi SYSTEM DX471-TD7 7" COLOR TFT Wi-Fi MONITOR • Please read this manual carefully before using the product you purchase,and keep it well for future use. • Please note that images and sketch maps in this manual may be different from the actual product.
Contents 1.Parts and Functions................................................... 1 2.Mounting.................................................................... 2 3.Main Menu................................................................. 3 4. Answering a Call....................................................... 5 5.Panview & Zoom........................................................ 6 6.Monitoring.................................................................. 6 7.
1. Parts and Functions LCD Screen Power/No Disturb Indicator Microphone Speaker Talk/Mon Button Unlock Button POW GND RING SW- SW+ ON DIP 123456 L1 Connection port L2 Key functions Speaker Send out vioce from the visitor. Talk/Mon button Press to communicate hands free with visitor; Press to view the outdoor condition in standby mode. LCD screen Display the visitors' image. Show the power status of the system. Power/No Disturb indicator Show the no disturb status.
Terminal description SW+,SW-: Extra door bell call button connection port. POW GND RING SW- SW+ Ring,GND: Extra buzzer connection port. ON DIP 123456 POW,GND: 12~16V extra power connection port. L1 SD L2 USB-Wi-Fi adaptor DIP switches: Total 6 bits can be configured. • Bit1~Bit5: User Code setting switch. • Bit6: Video impedance matching switch. L1,L2: Bus line terminal. 2.
3. Main Menu The Main menu is your starting point for using all the applications on your monitor. Touch Unlock button, or touch anywhere of the screen on monitor in standby mode, the Main menu will appear as follow: Monitor Touch it to view outdoor condition. Intercom Touch it to enter intercom selections. Touch this icon to directly enable the indicated function. Call Record Touch it to see calling in/calling out records or missed calls . Setting Press it to enter setup interface.
Icon Meaning Description Wi-Fi connection active and not connected Wi-Fi connection disabled Touch it to enter Wi-Fi setting interface in shortcut. Wi-Fi connection active and configured While talking with a door station Shows status of talking, unlocking ect. Displays which door station is calling. Displays talking time. Red while recording. 00:10 Door Station1 5 direction pad button, zoom&pantilt the picture. Note: The 5 direction pad operation should make effective with fish-eye door station.
4. Answering a Call 1. Touch it to answer the call. To end the call touch it again. 00:10 Door Station1 00:10 Door Station1 2. If necessary, during the call touch it to display the audio/ video adjustment icons. 3. Touch it to record image/ video. 4. Touch the icons to adjust the parameters you want. 5 3 6 Adjust the image colour. Adjust the image brightness. Adjust the volume. 5. Touch it to open the door lock for visitor.
5. Panview & Zoom If wants to see greater detail about visitors,move to the desired position by touching on the screen to view the image in pantilt & zoom mode. 1. Touch it to activate the panview and zoom function. 00:10 Door Station1 6. Monitoring This section can be used to monitor your home by enabling one of the cameras inside the apartment, the common areas (e.g. garages, garden), and at the entrance. 1. Touch it to display the cameras in your system.
2. Touch it to activate the desired camera on Monitor interface. 3. It is possible to “>” (display in sequence) the other cameras. 4. Touch it to return the previous menu. 5. Touch it to activate the specified camera in shortcut. The display shows the images recorded by the active camera. 6. If the camera belongs to an Door Station, touch it to activate audio communication. Touch it again to return the Monitor interface.
7. Call Another Room or Apartment (Intercom) It is possible to communicate with another device installed in another room of the apartment or with a device of another apartment. 1. Touch it to display the available intercoms. 2. Touch it to display the available namelist calls. 3. Touch it to activate the communication with the desired intercom. Namelist Intercom Intercom Namelist Namelist HEBE 1 Inner Call HEBE 2 Guard Station HEBE 3 Input Numbers HEBE 4 HEBE 5 the call is active.
4. Touch it to activate the communication with another room. Intercom Intercom Namelist Inner Call Guard Station Input Numbers 5. Touch it to activate the communication with guard station. Intercom Intercom Namelist Inner Call Guard Station Input Numbers 6. If the system does not have the room number you want, you can enter other room number. Touch it to enter input numbers interface.
7. Input the room numbers you want. 123_ Note: when a call is received from the Door Station while the internal unit is in “intercom” mode, the system follows the priority rules and ends the active call. 8. View Call Record When there are one or more unread call records in the answering machine, clicking the icon shows them. 1. Touch it to enter call record interface and display the records. These records include missed calls, incoming calls, outgoing calls and playback. 2.
The infomations you select is played back automatically. 3. Touch it to scroll interface. 1/223 4. Touch it to delete the image. [2017/09/16 09:50] Door Station 1 9. Opening Staircase Light Note: The staircase light should be connected on the system, and this function should be supported by RLC. Please refer to RLC user instruction in detail. 1. Touch it to open the staircase light.
10. No Disturb Function If you don’t want to be disturbed, for example, at night. Activating the mute function is necessary for you. 1. Touch it to enter call scene interface. 2. Touch it to set the no disturb mode: No Disturb 8H and No Disturb Always. CallScene CallScene Normal Use No Disturb 8H No Disturb Always Divert Call If No Answer Divert Call Always No Disturb 8H: The calling from door station or other monitors will be forbidden for 8 hours.
11. Divert Call The calling from door station can be diverted to your phone. please note that this function should be supported by Wi-Fi or SIP network. 1. Touch it to enter call scene interface. 2. Touch it to set the divert call mode: Divert Call If No Answer and Divert Call Always.
12. Setting Enter setting interface 1. Touch it to enter setting interface. Setting Call Tune Ring volume [04] General Door1 calling tune [01] Installer Door2 calling tune [01] Wireless Door3 calling tune [01] About Door4 calling tune [01] 2.
Ring tone setting The ring call tone can be set individually to distinguish different calling sources. Total 22 tones can be selected. Scroll to next interface 1. Touch it to enter call tune setting interface. 2. Touch the setting item to select the call tone. Setting Call Tune Ring volume [04] General Door1 calling tune [01] Installer Door2 calling tune [01] Wireless Door3 calling tune [01] About Door4 calling tune [01] Ring volume: adjust the ringtone volume.
Date and time setting The current date and time can be modified at any time. Setting Date time set Call Tune Date and time General Language General Date mode: Time mode: MM_DD_YYYY HOUR_12 Installer Monitor time Date: xxxx_xx_xx Wireless Shortcut setting Time: xx:xx About SD card 1. Touch it to enter the date time set interface. 2. Touch it to select the item you want to change. Date mode: 2 display mode: month/date/year and date/month/year Time mode: 2 display mode: HOUR_12 and HOUR_24.
Setting monitor time The monitor time can be changed at any time. It’s available to set 30s, 60s, 90s, 120s, 150s, 180s, 210s, 240s, 270s, 300s. * 30s is the default monitor time. Setting Monitor time select Call Tune Date and time General Language General 30(s) 60(s) Installer Monitor time 90(s) Wireless Shortcut setting 120(s) About SD card 150(s) 1. Touch it to enter the monitor time select interface. 2. Select the monitor time you want, and then touch it to confirm.
SD card If the device insert an SD card, the SD card info can be reviewed on the device. Setting SD Card Call Tune Date and time General Language General SD information Copy image Installer Monitor time Firmware Update Wireless Shortcut setting About SD card 1. Touch it to enter the SD card interface. 2. Select the item you want, and then touch it to confirm. SD information:SD card capacity. Copy image: touch it to copy the recorded images to SD Card.
Installer setting This section contains the device address setting and system settings. 1. Touch it to enter installer setting interface. Setting Call Tune Current addtess [01] General Intercom enable Enable Installer IPC Setting Wireless Monitor list manage About System settings DIP Switcher Set Address The DIP switches are used to set the user code for each monitor.Total 6 bits can be configured. • Bit-1 to Bit-5 are used for user code setting.
Enabling/Disabling intercom function It’s available to forbid or activate the intercom function. Setting Intercom enable Call Tune Current addtess [01] General Intercom enable Enable Installer IPC Setting Wireless Monitor list manage About System settings Installer Disable Enable *In default setting, intercom function is enable for the monitor. IPC Setting It’s available to set the related function of IP camera.
Add IPC by manual: Add the IP camera by manual. IPC Setting Installer IPC login Add IPC by searching Installer Add IPC by manual User name: admin IPC list IPC DHCP IPC IP: [Enable] User pwd: admin Channel: 2 Login IPC list: IP camera list. IPC Setting Installer IPC monitor Add IPC by searching IPC edit Add IPC by manual IPC delete [192.168.xxx.xxx] HeroSpeed IPC list IPC DHCP [Enable] 1. Touch it to edit the IP camera's name. IPC monitor IPC edit [192.168.xxx.
IPC DHCP:It’s available to forbid or activate the IPC DHCP. IPC Setting Installer IPC DHCP Add IPC by searching Playlist Add IPC by manual Disable Enable IPC list IPC DHCP [Enable] Monitor list manage It’s available to manage the monitor list.
Software upgrade It’s available to upgrade the device software via SD card. Setting Setting Call Tune Current addtess [01] Call Tune FW upgrade General Intercom enable Enable General Reboot Installer IPC Setting Installer Wireless Monitor list manage Wireless About System settings About FW update Installer Update code: Update server： Update start: Reboot It’s available to reboot the device.
Wireless setting SD card WIFI adaptor Wi-Fi monitor(DX471) 1. Touch it to enter wireless setting interface. 2. Touch it to activate the function, make sure the switch is ON. 3P-USB cable for FW updating Setting Call Tune Wifi switch [ON] General Wlan setting Installer Wireless device regist [00] Wireless IP/Smart phone regist [00] About SIP config 3. Touch it to enter wlan setting interface. 4. Touch it to scroll the interface. 5.
7. Enter the password (if required). PWD: vtk_ 8. Touch it to activate the connection, and return to Wi-Fi information interface. 9. Go to Connect/Disconnect item. Wireless SSID: VTKAP03 PWD: vtk@123 Connect/Disconnect Make slave Wi-Fi monitor to be registered with master Wi-Fi monitor On master Wi-Fi monitor and slave Wi-Fi monitor, go into wireless setting interface. 1. Touch it to enter the device manage interface.
2. Touch it to enter the master / slave register interface.
2. Touch it to manage the phone. Phone manage Wireless 3. Touch it to add phone address. Register phone Add slave Wireless Phone Addr: Add Ip/Smart phone 4. Input the phone IP address(this address is received from your phone). Make sure your mobile phone is connected to Home WIFI. After finish, press “OK” to save and return to last interface. If register is success, the Wi-Fi sub monitor will be added to master device. 192.168.169.199 Phone manage Wireless Register phone Phone IP:192.168.243.
SIP config It’s available to transfer the call to smart phone while out of home via SIP server. On the call scene interface CallScene CallScene 1. Touch it to select the divert call mode: Divert Call If No Answer or Divert Call Always. Normal Use No Disturb 8H No Disturb Always Divert Call If No Answer Divert Call Always On the wireless setting interface 2. Touch it to enter the SIP config.
About 1. Touch it to enter about interface. Setting Call Tune Device Type: General S/W Ver: DX471 V1.0.0.171110111114 Installer Serial No: 040019b93333 Wireless Node ID: 200 About IP Address: 192.168.01.100 linked Device Type: the device name. S/W Ver: the sofeware version. Serial No: the device serial number. Node Id: Node ID number. IP Address: the device IP address. H/W Address: the device Mac address. Subnet Mask: the device subnet mask. Default Route: the device default route.
Setup the Linphone(Android) 1. Touch the icon to open the linphone software on the cellphone. 2. Select “USE SIP ACCOUNT”. 3. Input the ID and password, “opensips.
4. Make sure that your cellphone’s internet service is good, after login, on the left “Registered” displayed, and touch the icon. 5. Select “Setting” item. 6. select "Audio" item. 7. Tick “Echo cancellation”. 8. Untick “Adaptive rate control”. 9. In CODES, only tick PCMU and untick all other items. 10. All audio settings are done, and touch “back” to go back to settings menu and touch “Video” for video settings.
11. Keep all setting as default in VIDEO settings. 12. Untick “VP8”. 13. Tick on “H264”. 14. All settings is done here, and back to stand by interface. *About the APP application, please contact our technical engineer for detail. 14. How It Works Two working modes There are 2 working modes depend on whether your mobile phone is covered with same Wi-Fi network or not, and DX master monitor can be regarded as a gateway device.
Local mode--at home with same Wi-Fi network •• No need SIP sever and account log in •• Both Wi-Fi sub Monitor and Phone in Local mode work as wireless slave •• monitors Home router 2-wire System 2 2 RF CARD PC6A Wi-Fi master montior Wi-Fi sub monitor Wireless terminal (smart phone) In case of calling, Wi-Fi sub Monitor and Phone will ring simultaneously, one device answer the call will make others turn off automatically.
15. Specification ●● Power supply: DC 20~28V ●● Power consumption: Standby 1.8W; Working 8.16W ●● Monitor screen: 7 Inch digital color TFT ●● Display Resolutions: 800*3(R, G, B) x 480 pixels ●● Video signal: 1Vp-p, 75Ω, CCIR standard ●● Wiring: 2 wires, non-polarity ●● Dimension: 161(H)×174(W)×22(D)mm 16. Precautions 1) All components should be protected from violence vibration. And not allow to be impacted, knocked and dropped.
