DR1198 JN5168 USB Dongle Reference Manual JN-RM-2065 Revision 1.
DR1198 JN5168 USB Dongle Reference Manual Contents About this Manual 3 Organisation Conventions Acronyms and Abbreviations Related Documents 3 3 3 3 1 Introduction 4 1.1 Overview 1.2 Features 1.3 Reference Design 4 5 5 2 Hardware Overview 6 2.1 Dongle Layout 2.2 Dongle Block Diagram 2.3 FT232L Device 2.4 JN5168 Device 2.5 LEDs 2.6 32-kHz Crystal Oscillator 6 6 6 6 7 7 3 Programming 8 4 Compliance Statements & Documentation 9 4.1 FCC Statements and Documentation 4.1.
DR1198 JN5168 USB Dongle Reference Manual About this Manual This manual provides a detailed reference for NXP’s DR1198 JN5168 USB Dongle. The manual is part of the reference design JN-RD-6039. This USB Dongle provides an easy way of communicating with the NXP JN5168 wireless microcontroller from a USB connection. With suitable embedded software running on the JN5168 device, the dongle can then communicate with an IEEE 802.15.4, JenNet-IP or ZigBee PRO network.
DR1198 JN5168 USB Dongle Reference Manual 1 Introduction This manual provides a detailed reference for the DR1198 JN5168 USB Dongle, supplied with JN516x EK001 evaluation kit. The dongle provides a platform for hardware development environment for wireless microcontroller applications with a USB interface. 1.1 Overview The DR1198 JN5168-001-U00 Dongle provides an easy way of interfacing a host machine (such as a PC) to a wireless network based on the IEEE802.15.
DR1198 JN5168 USB Dongle Reference Manual 1.2 Features The dongle has the following features: USB 2.0 Full-Speed Compatible Interface IEEE 802.15.4-based wireless microcontroller (JN5168) with the following radio characteristics: Transmit Power: 2.5 dBm (typ.) Transmit Current: 15mA (typ.) Receive Sensitivity: –95dBm (typ.) Receive Current: 17.5mA (typ.) Printed RF antenna general-purpose LEDs (one green, one orange) Serial Flash memory device 32-kHz crystal oscillator 1.
DR1198 JN5168 USB Dongle Reference Manual 2 Hardware Overview 2.1 Dongle Layout 30mm SPI Flash Antenna 16mm USB FT232RL LEDS JN5168 Figure 1: DR1198 Board Layout 2.2 Dongle Block Diagram XTAL 12 MHz FT232RL USB Matching Integrated Antenna JN5148 chip Time of Flight Engine RAM 32kB Flash 256kB SPI 2.4GHz Radio O-QPSK Modem Watchdog timer Power Management UART IEEE802.15.
DR1198 JN5168 USB Dongle Reference Manual 2.5 LEDs There are two surface-mounted LEDs that can be controlled by the JN5148 wireless microcontroller (see Figure 2 for locations): LED D1 which is green LED D2 which is orange Both LEDs are connected to DIO16 and DIO17. These DIOs can be used to control the LEDs as indicated in the table below. DIO 17 Low DIO16 High Low High D1: Off D1: Off D2: Off D2: On D1: On D1: Off D2: Off D2: Off 2.
DR1198 JN5168 USB Dongle Reference Manual 3 Programming When the IEEE 802.15.4 USB Dongle is powered up, it attempts to load an application from the internal Flash and then run the application. This may be a self-contained application that sends and receives wireless data, and which does not need to communicate with the host. Alternatively, it may communicate via the USB to an application running on the host, such as a Windows program, and communicate with a wireless device or network.
DR1198 JN5168 USB Dongle Reference Manual 4 Compliance Statements & Documentation 4.1 FCC Statements and Documentation This section contains the Federal Communication Commission (FCC) statements and documents. 4.1.1 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
DR1198 JN5168 USB Dongle Reference Manual 4.1.3 FCC Declaration of Conformity JN5139-000-M00 FCC COMPLIANCE INFORMATION STATEMENT JN5139-000-M01 DECLARATION OF CONFORMITY JN5139-000-M02 JN5139-000-M03 NXP LABORATORIES (UK) LTD FURNIVAL STREET SHEFFIELD S1 4QT UNITED KINGDOM TELEPHONE: FACSIMILE: E MAIL: WEB: JN5139-000-M04 Manufacturer: Responsible Party in the USA: Product: Authorisation Procedure: +44 (0) 114 281 2655 +44 (0) 114 281 2951 info@jennic.com www.jennic.
DR1198 JN5168 USB Dongle Reference Manual 4.2 Industry Canada Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
DR1198 JN5168 USB Dongle Reference Manual Revision History Version 1.0 12 Date Description 17-Dec-2012 First release © NXP Laboratories UK 2012 JN-RM-2065 v1.
DR1198 JN5168 USB Dongle Reference Manual Important Notice Limited warranty and liability — Information in this document is However, NXP Semiconductors does not give any representations or the accuracy or completeness of such information and shall have no such information. NXP Semiconductors takes no responsibility for the an information source outside of NXP Semiconductors. believed to be accurate and reliable.
