User's Guide
Table Of Contents
- 1. Introduction
- 2. Specifications
- 3. Pin Configurations
- 4. Electrical Characteristics
- Appendix A Additional Information
- A.1 Outline Drawing
- A.2 Module PCB Footprint
- A.3 Optimal PCB placement of the JN5168-001-M00 Module
- A.4 JN5168-001-M00 Antenna Radiation Pattern
- A.5 Manufacturing
- A.5.1 Reflow Profile
- A.5.2 Soldering Paste and Cleaning
- A.6 Ordering Information
- A.7 Related Documents
- A.8 Federal Communication Commission Interference Statement
- A.8.1 Antennas approved by FCC for use with JN5168 modules
- A.8.2 High Power Module usage limitation
- A.8.3 FCC End Product Labelling
- A.9 Industry Canada Statement
- A.9.1 Industry Canada End Product Labelling
- A.10 European R & TTE Directive 1999/5/EC Statement
- A.11 RoHS Compliance
- A.12 Status Information
- A.13 Disclaimers
- Version Control
Data Sheet: JN5168-001-Myy
JenNet, ZigBee PRO and IEEE802.15.4 Module
JN-DS-JN5168-001-Myy © NXP Laboratories UK 2012
Features: Module
• 2.4GHz IEEE 802.15.4, JenNet-IP,
ZigBee Light Link, ZigBee Smart Energy
and RF4CE compatible
• JN5168-001-M00/03
up to 1km range (Ext antenna)
M00: integral antenna 16x30mm
M03: uFl connector 16x21mm
o TX power +2.5dBm
o Receiver sensitivity –95dBm
o TX current 15mA
o RX current 17.5mA
o 2.0-3.6V operation
• JN5168-001-M05
up to 2km range (Ext 2dBi Antenna)
o 9.5 dBm TX Power
o Receiver sensitivity -96dBm
o uFl connector
o TX current 35mA
o RX current 22mA
o 16x30mm
o 2.0-3.6V operation
• JN5168-001-M06
up to 6km range (Ext 2 dBi Antenna)
o 22dBm TX Power
o Receiver sensitivity -100dBm
o uFl connector
o TX current 175mA
o RX current 22mA
o 16x30mm
o 2.0-3.6V operation
Features: Microcontroller
• 32-bit RISC CPU, up to 32MIPs with low
power
• Data EEPROM with guaranteed 100k
write operations
• RF4CE, JenNet-IP, ZigBee Smart
Energy stacks
• JTAG debug interface
• 4-input 10-bit ADC, 1 comparator
• 5 x PWM (4 x timer, 1 x timer/counter)
• 2 UARTs
• SPI Master & Slave port with 3 selects
• 2-wire serial interface
• Battery and Temperature Sensor
• Watchdog timer and BOR
• Up to 20 DIO
Industrial temp (-40°C to +85°C)
Lead-free and RoHS compliant
Overview
The JN5168-001-Myy family is a range of ultra low power, high performance surface mount
modules targeted at IEEE 802.15.4, JenNet-IP, ZigBee Light Link, ZigBee Smart Energy and
RF4CE networking applications, enabling users to realise products with minimum time to
market and at the lowest cost. They remove the need for expensive and lengthy development
of custom RF board designs and test suites. The modules use NXP’s JN5168 wireless
microcontroller to provide a comprehensive solution with large memory, high CPU and radio
performance and all RF components included. All that is required to develop and manufacture
wireless control or sensing products is to connect a power supply and peripherals such as
switches, actuators and sensors, considerably simplifying product development.
Four module variants are available: JN5168-001-M00 with an integrated antenna, JN5168-001-
M03 with an antenna connector and the JN5168-001-M05 and M06 with an antenna connector,
power amplifier and LNA for extended range. The JN5168-001-M05 output power has been
optimised for use in Europe and Asia.
Module Block Diagram
Benefits
• Microminiature module solutions
• Ready to use in products
• Minimises product development
time
• No RF test required for systems
• Compliant with
o FCC 47CFR Part 15C
o IC Canada RSS 210 Issue 8 -
Annex 8,
o ETSI EN 300-328 V1.7.1
o EN 301-489-17 V2.1.1
o EN60950-1-2006 +A1, A11, A12
Applications
• Robust and secure low power wireless
applications
• ZigBee and JenNet-IP networks
• Home and commercial building
automation
• Utilities metering (e.g. AMR)
• Location Aware services (e.g. Asset
Tracking)
• Toys and gaming peripherals
• Industrial systems
• Telemetry
• Remote Control
4xPWM + Timers
2x UART
4 Chan 10-bit ADC
Battery and Temp
Sensor
2-Wire Serial
(Master/Slave)
SPI Master & Slave
RAM
8/32K
128-bit AES
Encryption
Accelerator
2.4GHz
Radio
Including
Diversity
Flash
64/160/256K
32 -Bit
RISC CPU
Power
Management
XTAL
O-QPSK
Modem
IEEE802.15.4
MAC
Accelerator
Power
Matching
uFl
Connector
Matching
Integrated Antenna
Matching
uFl
Connector
PA / LNA
External
Antenna
M00 Option
M03 Option
M05/M06 Option
20 DIO
Sleep Counter
4kB
EEPROM
Watchdog
Timer
Voltage
Brownout