Hardware Manual

ManualsBrandsNXP Austria ManualsElectronicsNTAG I2C plus Explorer Kit

Table Of Contents

1. NTAG I2C plus Explorer Kit OM5569/NT322E: Photo
2. NTAG I2C plus Explorer Kit OM5569/NT322E: Description
- 2.1. Operational desription
  - NXP’s NTAG I2C plus Explorer Kit is an all-in-one demonstration/development resource for NFC connected tags. Designed to emulate using an NTAG I2C tag chip in an embedded electronic system, the kit centers around a multi-purpose microprocessor-based development/Explorer board, and includes a full complement of hardware and software tools to support investigation of the NTAG I2C chip operation, the NFC RF communication link, and the I2C serial bus connected link; perform a variety of demonstrations; and develop/test your own applications.
3. NTAG I2C plus Expolorer Kit OM5569/NT322E: SPECIFICATION
4. INSTALLING MANUAL
- 4.1. Desktop use
- 4.2. Power supply
5. USER MANUAL
6. ELECTROMAGNETIC COMPATIBILITY
- 6.5.1. FCC Compliance Statement
- 6.5.2. COMPLIANCE INFORMATION according to 47CFR 2.1033
WARRANTY, LIMITATIONS OF LIABILITY

Document information

Info Content

Author Pavel Slamnik

Author Role Design Engineer

Keywords NTAG I2C plus Explorer Kit OM5569-NT322E, RFID, NFC, TAG, NTAG

Hardware Manual: NTAG I

C plus Explorer

Kit OM5569/NT322E

Doc Rev 1.00 Approved — 2015.09.01

BL ID

Summary of content (18 pages)

PAGE 1
Hardware Manual: NTAG I2C plus Explorer Kit OM5569/NT322E Doc Rev 1.00 Approved — 2015.09.
PAGE 2
Hardware Manual BL ID Project Name: Integration Manual Project ID: 62743 Revision History Revision Date Description Author 1.01 2015.12.07 First Version Pavel Slamnik Copyright: @2009, NXP Semiconductors The information contained herein is the exclusive and confidential property of NXP Semiconductors and, except as otherwise indicated, shall not be disclosed or reproduced in whole or in part. SRS Template_vs 1.0 Doc ID: DOC-XXXXXX public Doc Rev 1.00 Approved — 2015.09.01 © NXP B.V. 2015.
PAGE 3
Hardware Manual BL ID Project Name: Integration Manual Project ID: 62743 1. NTAG I2C plus Explorer Kit OM5569/NT322E: Photo Figure 1: NTAG I2C plus Explorer Kit OM5569/NT322E – Connected Tags Explorer Board with NTAG I2C plus Antenna Board 54 x 27mm (pcb type). Figure 2: Connected Tags Explorer Board OM5569, Rev 2.0. SRSt Template 1.0 Doc ID: DOC-XXXXXX public Doc Rev 1.00 Approved — 2015.09.01 © NXP B.V. 2015.
PAGE 4
Hardware Manual BL ID Project Name: Integration Manual Project ID: 62743 Figure 3: NTAG I2C plus Antenna Board OM5569/NT322E, 54 x 27 mm. SRSt Template 1.0 Doc ID: DOC-XXXXXX public Doc Rev 1.00 Approved — 2015.09.01 © NXP B.V. 2015.
PAGE 5
Hardware Manual BL ID Project Name: Integration Manual Project ID: 62743 2. NTAG I2C plus Explorer Kit OM5569/NT322E: Description 2.1. Operational desription To demonstrate the unique properties of the NTAG I 2C tag chip, NXP developed the NTAG I2C plus Explorer Kit OM5569/NT322E which consists from Connected Tags Explorer Board OM5569 and one NTAG I2C plus Antenna Board OM5569/NT322E (54 x 27 mm ).
PAGE 6
Hardware Manual BL ID Project Name: Integration Manual Project ID: 62743 Figure 4: Connected Tags Explorer board with NTAG I 2C plus Antenna Board 54 x 27 mm. Figure 5: Connected Tags Explorer Board with NTAG I 2C plus Antenna Board and NFC device – princip of operation. Disclaimer: This module is intended only for development and evaluation purposes, and cannot be used in a finished product. SRSt Template 1.0 Doc ID: DOC-XXXXXX public Doc Rev 1.00 Approved — 2015.09.01 © NXP B.V. 2015.
PAGE 7
Hardware Manual BL ID Project Name: Integration Manual Project ID: 62743 Figure 6: Connected Tags Explorer Board Rev. 2.0 with NTAG I 2C plus Antenna Board – public © NXP B.V. 2015. All rights reserved Block diagram. SRSt Template 1.0 Doc ID: DOC-XXXXXX Doc Rev 1.00 Approved — 2015.09.
PAGE 8
Hardware Manual BL ID Project Name: Integration Manual Project ID: 62743 Figure 7: Connected Tags Explorer Board OM5569, Rev. 2.0: dimensions and equipped pcb with connectors. SRSt Template 1.0 Doc ID: DOC-XXXXXX public Doc Rev 1.00 Approved — 2015.09.01 © NXP B.V. 2015.
PAGE 9
Hardware Manual BL ID Project Name: Integration Manual Project ID: 62743 Figure 8: NTAG I2C plus Antenna Board OM5569/NT322E, 54 x 27mm, Rev. 2.0: dimensions and equipped pcb with connector. SRSt Template 1.0 Doc ID: DOC-XXXXXX public Doc Rev 1.00 Approved — 2015.09.01 © NXP B.V. 2015.
PAGE 10
Hardware Manual BL ID Project Name: Integration Manual Project ID: 62743 3. NTAG I2C plus Expolorer Kit OM5569/NT322E: SPECIFICATION 3.1. Connected Tags Explorer Board OM5569: Specifications Table 1: Connected Tags Explorer Board OM5569, Rev. 2.
PAGE 11
Hardware Manual BL ID Project Name: Integration Manual Project ID: 62743 3.2. Connected Tags Explorer Board OM5569, Rev. 2.0: Electrical characteristics Table 2: Connected Tags Explorer Board OM5569, Rev. 2.0 – electrical characteristics: Operating Range Symbol Description Conditions Min Typ Max Unit VCC DC Power Supply (from NTAG I2C tag ic) NTAG Active (on NTAG I2C Antenna Board) 3.0 - 4.6 V VBUS USB Power Supply (only for LCD backlight) NTAG Active (on NTAG I2C Antenna Board) 4.
PAGE 12
Hardware Manual BL ID Project Name: Integration Manual Project ID: 62743 3.3. NTAG I2C Antenna Board OM5569/NT322E, Rev 2.0 (54 x 27 mm) – specifications Table 3: NTAG I2C plus Antenna Board OM5569/NT322E, Rev 2.0 (54 x 27 mm) – specifications: Antenna PCB type, 54 mm x 27 mm Contactless operating frequency 13.
PAGE 13
Hardware Manual BL ID Project Name: Integration Manual Project ID: 62743 4. INSTALLING MANUAL 4.1. Desktop use NTAG I²C plus Explorer Kit OM5569/NT322E consists from Connected Tags Explorer Board OM5569 with NTAG I2C plus Antenna Board OM5569/NT322E 54 x 27 mm. It is intended for development use in development environment such are development departements in factories, at institutes, etc. It demonstrates the unique properties of the NTAG I²C tag chip.
PAGE 14
Hardware Manual BL ID Project Name: Integration Manual Project ID: 62743 5. USER MANUAL The NTAG I²C plus Explorer Kit is developed to demonstrate the unique properties of the NTAG I²C tag chip. The NTAG I²C plus Explorer Kit consists from two boards: Connected Tags Explorer Board and NTAG I²C plus Antenna board.
PAGE 15
Hardware Manual BL ID Project Name: Integration Manual Project ID: 62743 5.2. General functions - Reading/writing to/from NTAG I2C tag ic is possible with NFC mobile phone with android application. - Explorer Board with NTAG I2C plus Antenna Board can communicate with NFC mobile phone in distance up to 30 mm from the center of the NTAG I 2C plus Antenna Board to the center of phone NFC antenna.
PAGE 16
Hardware Manual BL ID Project Name: Integration Manual Project ID: 62743 6. ELECTROMAGNETIC COMPATIBILITY NTAG I²C plus Explorer Kit fulfils the following requirements of electromagnetic compatibility: FCC, Part 15. 6.5.1. FCC Compliance Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 17
Hardware Manual BL ID Project Name: Integration Manual Project ID: 62743 6.5.2. COMPLIANCE INFORMATION according to 47CFR 2.1033 We, declare that the product NTAG I²C plus Explorer Kit OM5569/NT322E FCC 12.225, FCC ID: OWROM5569-NT322E is in conformity with Part 15 of the FCC Rules.
PAGE 18
Hardware Manual BL ID Project Name: Integration Manual Project ID: 62743 WARRANTY, LIMITATIONS OF LIABILITY WARRANTY POLICY Manufacturer warrants that any product (“Product“) sold by Manufacturer to an end user (“User”) shall be free of defects in material and workmanship for a period a one year (or other period if specified) from date of sale by Manufacturer.