Integration Manual: Customer Evaluation Board CLRC663, CLEV6630B Doc Rev 1.00 Approved — 2017.02.15 1. Customer Evaluation Board CLRC663, CLEV6630B: Photo Figure 1: Customer Evaluation Board CLRC663, CLEV6630B – side view. Figure 2: Customer Evaluation Board CLRC663, CLEV6630B – bottom view.
. Customer Evaluation Board CLRC663, CLEV6630B: Description 1. Operational desription Customer Evaluation Board CLRC663, CLEV6630B, is an example of implementation of ISO/IEC 14443A and ISO/IEC 14443B reader/writer and NFC reader/writer (P2P passive initiator mode) on the same printed board. Middle size antenna, implemented on the same pcb, permits reading/writing on distance up to 50 mm (RFID card or other NFC device).
Figure 3: Customer Evaluation Board CLRC663, CLEV6630B - Block diagram.
Figure 4: Customer Evaluation Board CLRC663, CLEV6630B: dimensions, pcb with elements.
3. Customer Evaluation Board CLRC663, CLEV6630B: SPECIFICATION 3.1. Customer Evaluation Board CLRC663, CLEV6630B: Specifications Table 2: Customer Evaluation Board CLRC663, CLEV6630B – specifications Antenna PCB type, 65 mm x 65 mm Contactless operating frequency 13.
Electrical and Mechanical Specifications Power Supply 5V DC 5%, 500 mA (via USB port) or external power suply 7 – 13.5 V DC / 500 mA PCB Dimensions (L x W x H) 152 mm x 68 mm x 15 mm Weight approx.
3.2. Customer Evaluation Board CLRC663, CLEV6630B: Electrical characteristics Table 3: Customer Evaluation Board CLRC663, CLEV6630B – Electical Specifications Operating Range Symbol Description Conditions Min Typ Max Unit 7-13.5V DC DC Power Supply Active Reader 7.0 - 13.5 V VUSB DC Power Supply Active Reader 4.75 5.0 5.
4. INSTALLING MANUAL 4.1. Desktop use Customer Evaluation Board CLRC663, CLEV6630B is intended for development use in development environment such are development departements in factories, at institutes. CLEV6630B board is powered via USB serial connection from personal computer or via external power supply. Usuall climate conditions in development environment (room temperature and humidity) are deep inside Customer Evaluation Board CLRC663, CLEV6630B specified climate conditions. 4.2.
5. USER MANUAL Customer Evaluation Board CLRC663, CLEV6630B is an example of implementation of ISO/IEC 14443A and ISO/IEC 14443B reader/writer, NFC reader/writer and Card Emulation Device on the same printed board. Middle size antenna, implemented on the same pcb, permits reading/writing on distance up to 50 mm (RFID card or other NFC device). The onboard USB connector permits direct connection and communication with personal computer.
5.2. Instructions for safe work, maintaining and care • Be careful not to damage the connectors, antenna, PCB, ICs and other connected parts. • Because of the specifics of the device and the damage, only quallified staff, authorized by the producer, are allowed to repair the device. All interventions of the unauthorized person and mechanical damage means repealing of the guarantee.
6. ELECTROMAGNETIC COMPATIBILITY Customer Evaluation Board CLRC663, CLEV6630B fulfils the following requirements of electromagnetic compatibility: FCC, Part 15 and CE. 6.1 FCC Compliance Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment.
6.2 COMPLIANCE INFORMATION according to 47CFR 2.1033 We, declare that the product Customer Evaluation Board CLRC663, CLEV6630B FCC 12.225, Limited Modular Approval, FCC ID: OWRCLEV6630B is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following conditions: (1) this device may not cause harmful interference (2) this device must accept any interference received, including interference that may cause undesired operation.