EE Upon lifelong your finger fom drawing, a grid will automatically be placed within the area you outlined. lee Ee : Die Ea (as Ee Warpaint gu en Clicking the green circle grid icon, located in the grid, will bring up the side option panel for the grid, which allows you to control the grid attributes.
isl ihe mit | Angle L LE Wall Scan Missions ‘Wall Scan is a mission item ype useful for doing linear scans of straight areas from the side.
Column Width Missions Rows To use it, drop a Wall Scan item on the location you want to scan. Set the Wall Length selling to the length of the scan, and twill expand on either side of the dropped location. Use the At Distance setting to control how close 10 the location the vehicle will iy. Use Scan Angle to control which direction the scan will go. Scan Angle is expressed in degrees relative to the dropped point, with the scan direction being 90 degrees to that.
watersheds will nine countersink shad and fu hack ane Tower Scan Missions Tower Scan is & ype of mission item that allows for scanning things like wind carbines, radio towers, water Towers, ele. It's meant to fly around a target at a pacified radius, taking pictures (or recording video) as it goes.
A Tower Scan can be assigned the following attributes: Fare Specification 8 The value of the "Altitude” tribute in the "comm Base Altitude , section Top alt Highest Altitude used in scan Step Height Altitude increase between scan runs Radius Distance from the target The angle relative to the target where the scan Start Angle g 9 stars. How far the scan encircles th et. isa Scan Angle tray 360 complete circle, 180 is a half circle, and so on.
A vertical scan starts at the base allude of a scan leg and fells straight up to the top of the leg. Once there, It moves over In the next leg, and dies straight down to the base altitude. It continues this patter unt! the end of the scan. if you have "Take Epicure” med on, it stops at intervals on the way up or down and takes a picture. A Horizontal scan sans at the base altitude and flies horizontally, stopping for 2 seconds at each leg (and optionally tangle a pleasure.
WE To adjust a Survey, use the normal editing tools. Move polygon points by dragging them around, and delete them by clicking the Delete button and clicking the points. you don't like a move or delete you've just done, hit Undo and twill go back to where twas. You can move an entire Survey around by dragging the center point. The whole collection of points will move along with it.
Fly a Mission Flying missions are done from the Map view in the flight screen.
Click one, and a panel containing ‘Send and ‘Arm: bunions will appear. Click Send and the mission will be generated and sent io the vehicle. At that point, the Arm bunion can be used to arm the motors. Once you've done that If your mission has a Takeoff point, you can click Stan and the mission will start on its own. Otherwise, you can click Takeoff, and then Start Alliteratively, you can launch manually, and then click Start.
Tha Homed inl Bib © oblivion srm on clanswoman soon: fae « Pair The Air Unit + See Radio & System Talus + Calibrate the RC + Set RC Mode & Th rote Settings # Calibrate HW Wheel and Set Channel + Serration Regional Settings += Configure Bus Buttons Data link Settings App From the "App Launcher” screen, slide down the notification drawer from the top of the screen UNIONROSBOTICS™ PAIL Rolex | UR Select the "Union Robotics Settings” ens a y & UrifonRobotch Settings « ni » Radio Stats