Spec Sheet

Phone: (905) 901-3633

Fax: (866) 252-9148

www.nvtphybridge.com

Page |

NV-GLC-EX-SMD - 8.21.2018

GLC-EX-SMD GBIC Transceiver Module 1000Base-EX Dual LC

Part Number: NV-GLC-EX-SMD

Product Features

• Up to 1.25Gb/s dual data links

• Hot-pluggable SFP footprint

• 1310nm DFB laser transmitter

• Duplex LC connector

• Up to 40km on 9/125µm SMF

• Metal enclosure for lower EMI

• Single +3.3V power supply

• Low power dissipation <600mW

• Commercial operating temperature range: 0°C to +70°C

Applications

• 1.25Gb/s 1000Base-LX Ethernet

• 1.06 Gb/s Fibre Channel

General

Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor

Pluggable Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet

as specified in IEEE STD 802.3 and 1x Fibre Channel as defined in FC-PI-2 Rev. 10.0.

PAGE 1
GLC-EX-SMD GBIC Transceiver Module 1000Base-EX Dual LC Part Number: NV-GLC-EX-SMD Product Features • • • • • • • • • Up to 1.25Gb/s dual data links Hot-pluggable SFP footprint 1310nm DFB laser transmitter Duplex LC connector Up to 40km on 9/125µm SMF Metal enclosure for lower EMI Single +3.3V power supply Low power dissipation <600mW Commercial operating temperature range: 0°C to +70°C Applications • • 1.25Gb/s 1000Base-LX Ethernet 1.
PAGE 2
I. Pin Descriptions Pin Symbol 2 TX Fault 1 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 VeeT TX Disable MOD_DEF(2) MOD_DEF(1) MOD_DEF(0) Rate Select Name/Description Transmitter Ground (Common with Receiver Ground) Transmitter Fault. Ref. 1 Transmitter Disable. Laser output disabled on high or open. 2 Module Definition 1. Clock line for Serial ID. 3 Module Definition 2. Data line for Serial ID. Module Definition 0. Grounded within the module.
PAGE 3
II. Optical Characteristics (TOP=25°C, Vcc=3.3 Volts) Parameter Symbol Min Typ Max Output Opt. Power PO -2 - +3 Optical Wavelength λ 1275 1310 1350 nm tr/tf - 170 260 ps - - 0.
PAGE 4
Notes: 1. Gigabit Ethernet and 1x Fibre Channel compliant. 2. Tested with a PRBS 2 -1 data pattern. 3. 4. 7 Dispersion limited per FC-PI-2 Rev. 10. Attenuation of 0.55 dB/km is used for the link length calculations. Please refer to the Optical Specifications in Table IV to calculate a more accurate link budget based on specific conditions in your application. IV.