Spec Sheet

Network Video Technologies
4005 Bohannon Drive • Menlo Park, CA 94025 • USA
(+1) 650.462.8100 • 800.959.9870 • FAX [phone]
nvt.com • [e-mail]
WIRE DISTANCE (Power Distance Charts)
Supply voltage, wire resistance and minimum camera operating
voltage determine the maximum camera distance. Examples
assume a minimum 21 VAC at the 24 VAC camera:
Notes: Wire should be Cat5 or better/ low voltage camera power, video and RS-422
or RS-485 data may reside within the same wire bundle, however do not run 24 or
28VAC within the same wire bundle as other telecom or datacom signals.
VIDEO
UTP, RJ45 Connectors 100 ohms
POWER
16 to 24AWG (0,5mm to 1,3mm)
CAMERA PVD CONNECTIONS
Four front-panel RJ45 outputs support up to four fixed
or P/T/Z telemetry cameras over 4-pair UTP.
CONTROL ROOM VIDEO
UTP video signals are passed through the unit and
delivered to the control/MDF room via rear-panel
RJ45 connectors.
CONTROL ROOM DAT A
RS-422 or RS-485 type P/T/Z telemetry/ data signals are
paralleled together in groups of four, and passed through
the unit and delivered to the control room via a rear-panel
RJ45 connector.
CONTROL
UTP, RJ45 Connectors 100 ohms
ENVIRONMENTAL
Temperature -22 to +167 °F (-30 °C to +75 °C)
Humidity (non-condensing) 0 to 95%
MECHANICAL
Dimensions, excluding brackets and connectors
19in wide x 1.73in high x .8in deep
(482mm wide x 44mm high x 21mm deep)
Weight 0.94lb (0.43kg)
Mounting Rack mount
Specifications subject to change without notice.
-27-
1
2
3
4
5
6
7
8
Vi deo +
Vi deo
-
Dat a +
Pow er
-
Pow er +
Dat a
-
Pow er +
Pow er
-
1
2
3
4
5
6
7
8
Video 2 +
Video 2
-
Video 3 +
Video 1
-
Video 1 +
Video 3
-
Video 4 +
Video 4
-
1
2
3
4
5
6
7
8
D a ta B +
D a ta B
-
D a ta C +
D a ta A
-
D a ta A +
D a ta C
-
D a ta D +
D a ta D
-
Model NV-716J-PVD
Cable Integrator
Technical Specifications