Spec Sheet

Network Video Technologies
4005 Bohannon Drive • Menlo Park, CA 94025 • USA
(+1) 650.462.8100 • FAX [phone]
nvt.com • www.nvt.com/email/info
-89-
Model NV-418AR
Dual Passive Video/Audio Transceiver
Features:
• Dual Full-motion monochrome or color video and audio at distances up to:
- 750ft (225m) when used with another NV-418A or NV-418AR
- 3,000ft (1km) when used with an active receiver such as the NV-518A or NV-518AR
• No power required
• Built-in transient protection
• Exceptional interference rejection
• Supports “up-the-coax” type control signals
• RJ45, BNC and 1/4” TRS
• Limited lifetime warranty
The NVT Model NV-418AR Dual Video/Audio Transceiver is a rack-mount passive (non-amplified)
device that allows transmission of real-time monochrome or color video and audio over Unshielded
Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
Applications include Security/Surveillance, Video Distribution, Video Conferencing, or Distance
Learning.
The unparalleled interference rejection and low emissions of the Model NV-418AR allow video signals
to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows
the use of a shared or existing cable plant. “Up-the-coax” type signal may be sent over the same wire
pair.
The NV-418AR card slides into the NV-RM15 chassis. For stand alone applications, use the NV-418A.