Spec Sheet
Network Video Technologies
4005 Bohannon Drive • Menlo Park, CA 94025 • USA
(+1) 650.462.8100 • 800.959.9870 • FAX (+1) 650.326.1940
nvt.com • info@nvt.com
Model NV-226J-PV
UTP Video Transmitter +12VDC Converter
Features:
• Extended distance camera power and video routed through UTP and RJ45
• Supports 12VDC cameras with onboard regulated power
• Use with NVT’s PVD
™
Power Supply Hubs and Cable Integrators
• Up to 3,000ft (1km) with a NVT DigitalEQ
TM
Hub or active receiver, (see Power Distance Chart)
• Up to 1,500ft (460m) with a NVT StubEQ
TM
Hub
• Up to 750ft (225m) with NVT’s Passive Receiver Hubs (see Power Distance Chart)
• Exceptional interference rejection
• Built-in transient protection
• Limited lifetime warranty
The NV-226J-PV Video Transmitter +12VDC Converter is a passive (non-amplified) video transmitter com-
bined with a 24VAC-to-12VDC converter. Designed to fit on the back of a fixed 12 VDC camera, this unit
is architected to convert 24VAC power from the control room, while delivering real-time baseband (com-
posite) video at extended distances, all over one 4-pair UTP cable.
The unparalleled interference rejection and low emissions of the NV-226J-PV allows video and low-
voltage power to coexist within the same 4-pair cable, using structured (EIA 568B) wiring practices. It is
recommended that the 24VAC not share the same jacketed wire bundle with telecom or datacom signals.
The NV-226J-PV carries a limited lifetime warranty, is UL and cUL listed, and is CE, WEEE, and RoHs
compliant.
-21-
NEW!