SHIELD Remote NVIDIA P2930
Table of Contents About Your SHIELD remote .......................................................................................................... 1 using your shield remote ................................................................................................................. 2 Shield Remote ............................................................................................................................. 2 How to Connect Your remote to a shield device ...............................
ABOUT YOUR SHIELD REMOTE Your NVIDIA® SHIELD™ remote makes it easy to access all of your favorite movies, music, and TV on your SHIELD device, with familiar navigation buttons and integrated voice search capability.
USING YOUR SHIELD REMOTE The SHIELD remote box includes one SHIELD remote, one USB charging cable, one Support Guide, and one Quick Start Guide.
SHIELD Remote Select Button Back button Home button Voice search button with indicator light Volume touch control 3
HOW TO CONNECT YOUR REMOTE TO A SHIELD DEVICE The first time you use your SHIELD remote, you must establish a connection with a SHIELD device. This connection is saved for future use. HOW TO CONNECT YOUR REMOTE NOTE If you connect the remote to another SHIELD device, the previous connection is removed. Follow the steps in this procedure to establish the connection again. • On your SHIELD device, open the SHIELD accessories Add an accessory.
SHIELD Remote HOW TO RECONNECT THE REMOTE Your remote automatically reconnects when the SHIELD device and the remote are turned on and in range. 1. Turn on your SHIELD device. 2. Turn on the remote by picking it up. NOTE You do not need to turn off your remote. It will sleep automatically when inactive. Simply pick it up again to turn it back on. HOW TO TROUBLESHOOT CONNECTION PROBLEMS • Verify that the remote has enough charge.
HOW TO HOW TO CHECK THE REMOTE BATTERY LEVEL 1. Connect the remote to a SHIELD device. 2. The remote battery level is shown in the SHIELD accessories app.
USING YOUR REMOTE To Action Wake your SHIELD* Move through content Select an item Press the Select button Use the navigation D-pad to press up, down, left or right Press the Select button Go to the previous Press the Back screen button Go to Home screen Press the Home button Voice search Press the Voice search [mic image here] button then say your command. If you’re using an app when you press the Voice search button, you’ll search within that app.
** Your TV or A/V receiver must support HDMI-CEC system volume control in order to the control volume level of those devices. Otherwise, the volume control will mute and unmute only. If headphones are plugged in, SHIELD remote can control the volume level of the headphones.
USING VOICE SEARCH AND COMMANDS Your SHIELD remote supports voice search and commands. Use the integrated microphone to search without typing, ask questions and get answers, open apps, and play songs and movies. To start a Google search, initiate voice commands and ask your question. How to Use Voice Search 1. On your remote, press the Voice search [mic image here] button to open Google Now in listening mode. 2. Ask a question or speak your search terms.
SHIELD Legal HEALTH AND SAFETY INFORMATION Important Safety Information NVIDIA products are designed to operate safely when installed and used according to the product instructions and general safety practices. The guidelines included in this document explain the potential risks associated with equipment operation and provide important safety practices designed to minimize these risks.
SHIELD Remote To reduce the risk of electric shock, personal injury, or damage to the equipment, observe the following precautions: • Follow all cautions and instructions marked on the equipment. • Do not bend, drop, crush, puncture, incinerate, or push objects into openings of the device. • Do not connect or disconnect any cables or perform maintenance or reconfiguration of this product during an electrical storm. • Do not use the SHIELD in rain or near sink, or other wet locations.
The SHIELD Remote compliant with the regulations listed in this section. UNITED STATES Federal Communications Commission (FCC) FCC ID: VOB-P2930 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including any interference that may cause undesired operation of the device.
SHIELD Remote CAN ICES-3(B)/NMB-3(B) This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
A LIRE AVANT TOUTE UTILISATION D'UN JEU VIDEO PAR VOUS-MEME OU PAR VOTRE ENFANT I. - Précautions à prendre dans tous les cas pour l'utilisation d'un jeu vidéo. Evitez de jouer si vous êtes fatigué ou si vous manquez de sommeil. Assurez-vous que vous jouez dans une pièce bien éclairée en modérant la luminosité de votre écran. Lorsque vous utilisez un jeu vidéo susceptible d'être connecté à un écran, jouez à bonne distance de cet écran de télévision et aussi loin que le permet le cordon de raccordement.
SHIELD Remote Translation: This is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572-2011. All parts named in this table with an “X” are in compliance with the European Union’s RoHS Legislation. 0.
SHIELD Remote SOUTH KOREA Radio Research Agency (RRA) Korean Agency for Technology and Standards (KATS) MSIP-CRM-NVA-P2930 급 기기 (가정용 방송 통신기자재) B 이 기기는 가정용(B 급) 전자파적합기기로서 주 로 가정에서 사용하는 것을 목적으로 하며, 모 든 지역에서 사용할 수 있습니다. Translation: Class B Equipment (For Home Use Broadcasting & Communication Equipment) This equipment is home use (Class B) electromagnetic wave suitability equipment and to be used mainly at home and it can be used in all areas.
EurAsian Customs Union This device complies with the technical regulations of the Customs Union (CU TR) This device complies with the rules set forth by Federal Agency of Communications and the Ministry of Communications and Mass Media Federal Security Service notification has been filed. SINGAPORE Infocomm Development Authority of Singapore (IDA) Complies with IDA Standards [Dealer License #] BLUETOOTH Bluetooth v4.
SHIELD Remote The information provided in this document is believed to be accurate and reliable as of the date provided. However, NVIDIA Corporation (“NVIDIA”) does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information. NVIDIA shall have no liability for the consequences or use of such information or for any infringement of patents or other rights of third parties that may result from its use.
The Bluetooth® word, mark, and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks is under license. Wi-Fi CERTIFIED and Wi-Fi CERTIFIED Miracast are registered marks of the Wi-Fi Alliance. Steam is a trademark of Valve. Other trademarks and trade names are those of their respective owners. Copyright © 2016 NVIDIA Corporation. All rights reserved.
