User's Manual

ManualsBrandsNVIDIA ManualsElectronicsWLAN 2X2 MIMO 802.11a/b/g/n/ac with Bluetooth

Regulatory Module Integration Instructions

This module has been granted modular approval for mobile applications. OEM integrators for host

products may use the module in their final products without additional FCC / IC (Industry Canada)

certification if they meet the following conditions. Otherwise, additional FCC / IC approvals must

be obtained.

 The host product with the module installed must be evaluated for simultaneous

transmission requirements.

 The users manual for the host product must clearly indicate the operating requirements

and conditions that must be observed to ensure compliance with current FCC / IC RF

exposure guidelines.

 To comply with FCC / IC regulations limiting both maximum RF output power and human

exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-

only exposure condition must not exceed the following:

Peak Antenna Gain

Antenna Cable Loss

 Any device incorporating this module must include an external, visible, permanent

marking or label which states:

Contains FCC ID: VOB-P2180

Contains IC: 7361A-P2180

The final host / module combination may also need to be evaluated against the FCC Part 15B

criteria for unintentional radiators in order to be properly authorized for operation as a Part 15

digital device.

If the final host / module combination is intended for use as a portable device (see classifications

below) the host manufacturer is responsible for separate approvals for the SAR requirements

from FCC Part 2.1093 and RSS-102.

Note: In the case where the Host / Module combination has been re-certified the FCC ID shall

appear in the product manual.

Summary of content (6 pages)

PAGE 1
Regulatory Module Integration Instructions This module has been granted modular approval for mobile applications. OEM integrators for host products may use the module in their final products without additional FCC / IC (Industry Canada) certification if they meet the following conditions. Otherwise, additional FCC / IC approvals must be obtained.  The host product with the module installed must be evaluated for simultaneous transmission requirements.
PAGE 2
Device Classifications Since host devices vary widely with design features and configurations module integrators shall follow the guidelines below regarding device classification and simultaneous transmission, and seek guidance from their preferred regulatory test lab to determine how regulatory guidelines will impact the device compliance. Proactive management of the regulatory process will minimize unexpected schedule delays and costs due to unplanned testing activities.
PAGE 3
Simultaneous Transmission Evaluation Any simultaneous transmission condition established through module integration into a host product must be evaluated per the requirements in KDB447498 and KDB616217 (for laptop, notebook, netbook, and tablet applications).
PAGE 4
OEM Instruction Manual Content Consistent with §2.909(a), the following text must be included within the user’s manual or operator instruction guide for the final commercial product. OEM-specific content is displayed in bold-italics. Operating Requirements and Conditions: The design of (Product Name) complies with U.S.
PAGE 5
Consistent with Industry Canada RSS_GEN and RSS-247, the following text must be included within the user’s manual or operator instruction guide for the final commercial product. The content must be provided in both English and French OEM-specific content is displayed in bolditalics. The content below does NOT contain certified translations.
PAGE 6
Mobile Device RF Exposure Statement (If Applicable): RF Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Déclaration d'exposition aux radiations: Cet appareil est conforme aux limites d'exposition aux rayonnements définies pour un environnement non contrôlé.