Cut Sheet
PROLINE G2 MODULAR ENCLOSURE SOLUTIONS EnclosurE PackagEs
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEMODULAR ENCLOSURE SOLUTIONS1
Spec -01118 H
INDUSTRIAL PACKAGES, TYPE 12
INDUSTRY STANDARDS
UL 508A Listed; Type 12; File Number E61997
NEMA/EEMAC Type 12
CSA File Number 42186; Type 12
VDE IP55
IEC 60529, IP55
APPLICATION
ProLine G2 Industrial Packages are full-featured, ready-to-use
enclosure solutions that make it unnecessary to order each
component separately. For convenience, a single part number
includes a frame, solid door(s), handle and key lock, a solid top,
a solid rear cover, a full mounting subpanel, a gland plate, and
four lifting eyes. Side covers ordered separately to accommodate
joining/baying applications.
FEATURES
(Refer to separate specications for more complete details of
individual components)
•
12 gauge, roll-formed steel frame with welded steel corners and
hybrid frame prole for superior performance under load
•
Large galvanized mounting subpanel
•
EZ-Load Glide Blocks, which accommodate ve loading methods
•
Smooth glide latching system for a solid seal with a low closure
force
•
Galvanized Duro-Stand gland plate
•
Wide range of standard size options
• ‘E’ version (right-hinged and double-bit insert key lock)
SPECIFICATIONS
(Refer to separate specication sheets for more complete details of
individual components)
Frame
• 12-gauge (2.5 mm) roll formed steel frame, fully welded corners,
hybrid prole
• Accommodate the 25-mm DIN standard and include rectangular
and round holes
Gasket
• Seamless polyurethane gasket provides a watertight, dust-tight
seal against moisture and contaminants
• UL component recognized, CSA compliant
• Sealed mounting for all external accessories
Doors
• Door bar system on all doors (including window doors)
• Single/primary door includes 3-point roller latch system with
timed latch engagement for enclosures ≥1000 mm in height
• 2-door enclosures include overlapping double doors to provide
full-width open front; secondary door latches with two levers
• Reversible hinging on single doors (default left hinge)
• Reversible hinging on overlapping double doors (default right
door primary door)
• Two grounding studs
• Low-Prole Swing Handle with key lock on standard versions;
double bit lock on ‘E’ versions. Other options available.
Mounting subpanel
• Includes EZ-Load Mounting Blocks, which accommodate
ve loading options: vertical front, vertical side, vertical rear,
horizontal front (frame over subpanel), horizontal rear (subpanel
lowered into frame)
• Subpanel is securely fastened to the top and bottom of the frame.
Enclosures less than 1200 mm tall use 4 sets of EZ-Load Glide
Blocks. Enclosures 1200 mm tall or greater use 8 sets of glide
blocks for a well secured subpanel.
• Depth adjustable, accommodates back-to-back subpanels
• Galvanized full subpanel default; painted subpanel available
EMC Industrial Packages – Additional Specications:
• Plated to provide corrosion resistance while maintaining a metal-
to-metal contact with the metal ber gasket
• Metalized non-woven fabric EMI/RFI material covering UL94HP
rated urethane foam gasket
• Plating exposed in interior and paint over plated exterior
• All plated accessories electrically bonded to frame
• Longer lead times required for EMC items
FINISH
• Polyester powder paint; RAL 7035 textured light gray standard
• Custom colors available
ACCESSORIES
• Side Cover
• Side Door Adaptor
• Full Subpanel (Rear or Side)
• Partial Subpanel and Side-Mount Panel
• Panel Support Bracket
• Joining Subpanel
• Grid Strap Network (Rail System)
• Center Upright
• Support Bracket Kit
• Plinth Base
• Fully-Sealed Plinth Base
• Caster Kit
• Frame Joining Kits
• Joining Kit Support Bracket
• Dust Cover
• Flush Swing Handles
• Steel Data Pocket
• 19-Inch Rack Angles
• Pagoda Top
• Lifting Angles
• Barrier Panel
• Mechanical Interlock
• ProLine Grounding Kit
Bulletin: P41