Cut Sheet

INTERSAFE DATA INTERFACE PORTS INTERSAFE DATA INTERFAcE PoRTS, TyPE 4/4X/12
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEACCESSORIES1
Spec-00131 W
Spec-00131
INTERSAFE DATA INTERFACE PORTS, TYPE 4/4X/12
INDUSTRY STANDARDS
Mild Steel Painted Ports
UL 508A Component Recognized; Type 4, 12; File No. E61997
cUL Component Recognized per CSA C22.2 No 94; Type 4, 12;
File No. E61997
NEMA/EEMAC Type 4, 12
IEC 60529, IP66
Stainless Steel Ports
UL 508A Component Recognized; Type 4, 4X, 12; File No.
E61997
cUL Component Recognized per CSA C22.2 No 94; Type 4, 4X,
12; File No. E61997
NEMA/EEMAC Type 4, 4X, 12
IEC 60529, IP66
Clear-Cover (polycarbonate) Ports
UL 508A Component Recognized; Type 4X, 12; File No.
E61997
cUL Component Recognized per CSA C22.2 No 94; Type 4, 4X,
12; File No. E61997
IEC 60529, IP66
APPLICATION
INTERSAFE Data Interface Ports are mounted on an enclosure to
allow programming access to devices inside without opening the
enclosure door.
FEATURES
• Ready to use
• Frame and door assembly with aluminum back plate included
with all models; 120 VAC receptacles and programming
connectors are mounted to the plate in 40 standard
configurations
• All standard configurations include a GFCI or standard duplex
receptacle with a 5-A circuit breaker for added safety
• Door gasket (between the door and plate assemblies) and plate
gasket (between the plate assembly and the enclosure) together
provide a tight seal
• Template provided for accurate enclosure cutout dimensions
• Quarter-turn latch with screwdriver slot and padlock hasp on
all steel and stainless steel door models for convenience and
security
• Quarter-turn latch with screwdriver slot on polycarbonate
models
• Disk drive enclosure provides access to one or two customer-
supplied disk drives without opening the cabinet
• Modifications and customization available to accommodate a
wide variety of additional connectors
SPECIFICATIONS
• Door assembly and frame manufactured from 16 gauge steel or
stainless steel
• Clear-cover models have a molded polycarbonate door
• Steel and stainless steel doors are welded and ground
• Back plate is aluminum
FINISH
• RAL 9005 black fine-textured polyester powder coating—mild
steel door assemblies
• Brushed finish—stainless steel door assemblies
• Brushed finish—aluminum back plates
MODIFICATION AND CUSTOMIZATION
Hoffman excels at modifying and customizing products to
your specifications. Contact your local Hoffman sales office or
distributor for complete information.

Summary of content (20 pages)