Cut Sheet
Grounding Busbar–EGBA12410NN
Proper bonding is essential to create an equipotential plane between service grounds and equipment during fault and transient
conditions. This equipotential plane provides a near-zero voltage differential, and serves to protect people and equipment during
these events. The grounding busbar is the most popular bonding product in use today.
• Provides a convenient, single-point grounding and bonding location
• Conductors are welded to the bar using a ERICO CADWELD exothermic connection or are mechanically fastened by using lugs
• Custom bars can be designed and manufacturerd to customer specifications
Part Number EGBA12410NN
Material Copper
Busbar Configuration Busbar, Insulators and Brackets
Hole Pattern NN
Mounting Hole Size 0.438"
Length 10"
Width 4"
Thickness 1/2"
Tin Plating No
Pigtail Included No
Certifications cULus
Standard Packaging Quantity 1 pc
UPC 78285678990
Diagrams are representative of the hole pattern. The number of holes is dependent on the length of the grounding busbar.
Additional configurations are available by special order. Note special orders may incur additional lead time.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.
WARNING
Pentair products shall be installed and used only as indicated in Pentair’s product instruction sheets and training materials. Instruction sheets are available at erico.pentair.com and
from your Pentair customer service representative. Improper installation, misuse, misapplication or other failure to completely follow Pentair’s instructions and warnings may cause
product malfunction, property damage, serious bodily injury and death and/or void your warranty.
© 2016PentairAll rights reserved
Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates.
All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.